Abstract:The Nyquist wavelength-division multiplexing technique enable a solution to achieve high spectral efficiency in long-haul transmission system. Compare to polarization division multiplexing quadrature-phase-shift-keying, even high-level modulation scheme such as polarization division multiplexing 16-quadrature-amplitude-modulation is much more sensitive to intra-channel noise and inter-channel linear crosstalk caused by Nyquist wavelength-division multiplexing. We experimentally demonstrated the generation and transmission of the 6 × 128-Gb/s Nyquist wavelength-division multiplexing sixteen quadrature amplitude modulation signal over 1200-km single-mode fiber (SMF)-28 with Erbium-doped fiber amplifier only amplification with a net SE of 7.47 b/s/Hz, which is so far, to our knowledge, the highest SE for the signal with the bit rate above 100-Gb/s using the polarization-division multiplexing 16-quadrature-amplitude-modulation format. This experiment was successfully enabled by digital-signal-processing (DSP) pre-equalization of transmitter-side impairments and DSP post-equalization of the channel and receiver-side impairments. Nyquist-band is considered in the pre- equalization to enhance the tolerance of the polarization-division multiplexing 16-quadrature-amplitude-modulation to the aggressive spectral shaping. The bit error rate for each of the 6 channels is smaller than the limitation of the forward-error-correction limit of 3.8 ×10-3 after 1200-km SMF-28 transmission.

16 $\,{\times}\,$ 107-Gb/s 12.5-Ghz-spaced PDM-36QAM Transmission over 400 Km of Standard Single-Mode Fiber

64-Tb/s (640×107-Gb/s) PDM-36QAM Transmission over 320km Using Both Pre- and Post-Transmission Digital Equalization

82.29-Tb/s (182x560-Gb/s) Transmission of 42GHz-Spaced WDM PDM-128-QAM OFDM Signals over 100-km SMF

515 Gb/s, 10.31 B/s/hz, Optical PDM-128-QAM Nyquist Signal Transmission over 155-Km SSMF

Transmission of 200 G PDM-CSRZ-QPSK and PDM-16 QAM With a SE of 4 b/s/Hz

30-Tb/s (3×12.84-Tb/s) signal transmission over 320km using PDM 64-QAM modulation

6$\,\Times\,$ 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission over 1200-Km SMF-28 with SE of 7.47 B/s/hz

7 $\,\times\,$ 224 Gb/s/ch Nyquist-WDM Transmission over 1600-Km SMF-28 Using PDM-CSRZ-QPSK Modulation

32Tb/s (320×114Gb/s) PDM-RZ-8QAM transmission over 580km of SMF-28 ultra-low-loss fiber

6 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission Over 1200-km SMF-28 With SE of 7.47 b/s/Hz

Transmission of 8 × 480-Gb/s Super-Nyquist-filtering 9-Qam-like Signal at 100 GHz-grid over 5000-Km SMF-28 and Twenty-Five 100 GHz-grid ROADMs

8×250 Gbit/s PAM4 Transmission over 1 Km Single Mode Fiber with an All-Silicon LAN WDM Transmitter.

High-Speed PDM-RZ-8QAM DWDM Transmission (160 $\times$ 114 Gb/s) over 640 Km of Standard Single-Mode Fiber

Transmission of single-carrier 400G signals (515.2-Gb/s) based on 128.8-GBaud PDM QPSK over 10,130- and 6,078 km terrestrial fiber links.

20x112gbit/S, 50ghz Spaced, Polmux-Rz-Qpsk Straight-Line Transmission Over 1540km Of Ssmf Employing Digital Coherent Detection And Pure Edfa Amplification

Transmission of 200gb/s PM-16QAM and 150gb/s PM-8QAM DWDM Signals over Long-haul and Transoceanic Distance at 100km Span Length with EDFA-only

Transmission of Single-Carrier 400G Signals (5152-Gb/s) Based on 1288-Gbaud PDM QPSK over 10,130- and 6,078 Km Terrestrial Fiber Links

396.5Gb/s, 7.93b/s/Hz Hybrid 16-32QAM Transmission over 480km SSMF

Field Transmission of 100 G and Beyond: Multiple Baud Rates and Mixed Line Rates Using Nyquist-WDM Technology

WDM Transmission of 108.4-Gbaud PDM-QPSK Signals (40×433.6-Gb/s) over 2800-Km SMF-28 with EDFA Only

64-Tb/s, 8 B/s/hz, PDM-36QAM Transmission over 320 Km Using Both Pre- and Post-Transmission Digital Signal Processing