Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

The melt structures above the liquidus in SiCp/Al composite

THE DISTRIBUTION AND THE DIFFUSION OF Si ABOVE THE LIQUIDUS IN SiCp / Al COMPOSITE

The Melt Structural Characteristics Concerning the Interfacial Reaction in SiC(p)/Al Composites

Temperature Dependence of Melt Structure in SiCp/Al Composites above the Liquidus

The interfacial reaction characteristics in SiC/Al composite above liquidus during remelting

Effect of silicon-carbide volume fraction upon interface reaction in SiCp/Al composites

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Microstructure and Thermal Conduction Property of SiCp/Al- Si Composite with High Reinforcement Content

Solidification behavior of SiCw/Al-18Si composites

Effects of Hot Compression on Microstructure of SiC_p/Al Composite with High Volume Fraction

Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

The effect of Si upon the interfacial reaction characteristics in SiCp/Al-Si system composites during multiple-remelting

Influence of micron and nano SiC<sub>p</sub> on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

Polytypism of SiC and interfacial structure in SiCp/Al composites

Effect of Pressure on the Solidification Behavior and Mechanical Properties of SiCp/Al-Mg Composites

The Microstructure and Mechanical Property of Mo(Si, Al)2-SiC Composite Prepared by Infiltrating Melt Aluminum

Chemical reaction of SiCp/Al composites during multiple remelting

DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al–Si composite

Crystal Chemistry at Interfaces Between Liquid Al and Polar SiC{0001} Substrates

Liquid Structure of Al-Si Alloy: A Molecular Dynamics Simulation

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process