Abstract:Background:The digital to analog converter (DAC) used in space-borne electronic system is unavoidable to be affected by the radiation, and it is essential to evaluate the DAC performance before formal application. Purpose:This study aims to develop an automatic measurement system of high-accuracy and high-speed for radiation-tolerance evaluation of space-borne D/A converters.Methods:Based on the peripheral component interconnection extensions for instrumentation (PXI), Kelvin (4-wire) method and mean filtering algorithm are applied to accurately monitor the voltage and current of the DAC chip, and a switch matrix configured in software is adopted to automatically switch over measurements of different parameters. Meanwhile the PXI bus synchronization and trigger mode control are used to achieve high-speed response among modular instruments, and the cubic spline algorithm is performed to accurately extract the single event saturated cross section and linear energy transfer threshold.Results:The identified voltage precision is 0.1μV, and the DAC monitoring precision is up to 24 bit. In single event effects evaluation, the monitoring frequency of current variation and register upset are 50 Hz and 100Hz respectively, and for total dose effect evaluation, only 8-s ergodic time are needed to measure all characteristic parameters.Conclusion:The designed measurement system can evaluate the performance of space-born DAC fully automatically and efficiently with high precision, which is a reference solution to such similar research.

Design of an analog signal source for space particle radiation detector

Development of radiation tolerance evaluation and measurement system for spaceborne D/A converter

Design of New High Bias Supply for Space Particle Radiation Monitor

Design of Power Supply System in Multichannel Miniaturized High Energy Charged Particle Radiation Detector

Miniature Optical Signal Transmission System for PDN Noise Measurement

Design of Phase-Shift Signal Generator with High Precision Used for Particulate Detection

Design of Reduce Voltage Ripple in Sampling Circuit in Bias Voltage Model of Space Particle Detector

A New Particle Sensor Based on True RMS Value Measurement.

A Versatile 16-Channel Front-End Integrated Circuit for Semiconductor Radiation Detectors

Design and implementation of a ground detection system for HERD-TRD front-end electronics

Simulation of High Voltage Unit (HVU) in Particle Radiation Detector (PRD)

207 Bi Radioactive Source Tests of Silicon Detectors Based on VA140

Space Environment Monitoring Unit on Wentian Laboratory Cabin Module of China Space Station

A Multichannel Pulse Height Analyzer by Using Look-up Table for the Particle Radiation Detection

Primary Testing Performance of Designed Wide-dynamic Range Gamma Ray Dosimeter Based on Double GM Counters

Design of Bias Supply Based On Charge Pump In Space Particle Radiation Monitor

Design of the sampling measurement and radiochemistry lab in the nuclear island of HTR PM

Design of a RF Source Specialized for ENDOR Experiments Based on Direct Digital Synthesis

An Analogue Front-End ASIC Prototype Designed For PMT Signal Readout

Design and Test Results of a Front-End ASIC for Radiation Detectors

Design and Implementation of High Performance DAQ System for IRFPA Testing