Abstract:A theoretical study is conducted on the fracture behavior of a cracked equilateral triangle hole with surface effect subjected to far-field antiplane mechanical load and inplane electric load. A rigorous analytical solution to the stress and electric displacement fields are obtained based on the theory of Gurtin-Murdoch surface model and conformal mapping technique. A closed form solution to the stress intensity factor, the electric displacement intensity factor and the energy release rate at the tip of crack are presented. Numerical examples are provided to reveal the variations of the electroelastic field intensity factors and the energy release rate with the size of triangle hole, the length of crack and the applied mechanical load and electrical load. The major results of the study are as follows: (1) The electroelastic field intensity factors at crack tip are dramatically size dependent when the size of the cracked triangle hole is at nanoscale. The present solution approaches classical electroelastic theory when the length of cracked equilateral triangle hole has large characteristic dimensions. (2) With the increase of the length of crack, the electroelastic field intensity factors first increase rapidly, and then slowly decrease, and finally stabilize. (3) When considering surface effect, the stress and electric displacement intensity factors depend on the applied mechanical-electrical loads, which is different from that of the classical electroelastic fracture theory. (4) The normalized energy release rate increases with the increase of the size of the cracked triangle hole. (5) The influences of the applied mechanical load on the normalized energy release rate depend on whether the applied electrical load is positive or negative. (6) With the increase of the applied electrical load from negative to positive, the normalized energy release rate release rate first increases and then decreases. Very high positive and negative applied electrical loads shield the normalized energy release rate.

Fracture of A Rectangular Piezoelectromagnetic Body

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

A PENNY-SHAPED CRACK IN AN INFINITE PIEZOELECTRIC BODY UNDER ANTISYMMETRIC POINT LOADS

Fracture of piezoelectromagnetic materials

Plane Electromechanical Fieldes in a Piezoelectric Material with a Crack

Fracture of a Finite Piezoelectric Strip with a Crack Vertical to Its Borders – an Exact Analysis and Its Applications

Fracture Characteristics of a Cracked Equilateral Triangle Hole with Surface Effect in Piezoelectric Materials

Fracture of a piezoelectric fiber/elastic matrix composite

Fracture of a finite piezoelectric layer with a penny-shaped crack

Accurate Fracture Analysis of Electrically Permeable/impermeable Cracks in One-Dimensional Hexagonal Piezoelectric Quasicrystal Junction

An Electrical Field Based Non-Linear Model in the Fracture of Piezoelectric Ceramics

A New Singular Quasi-compatible Finite Element of Piezoelectric Materials and Its Fracture Analysis

A mixed electric boundary value problem for a two-dimensional piezoelectric crack

FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD

New considerations for the fracture of piezoelectric materials under electromechanical loading

Isolated crack in three-dimensional piezoelectric solid. Part II: Stress intensity factors for circular crack

Transient Electromechanical Cracking of Finite Piezoelectric Bodies

Multilayered piezomagnetic/piezoelectric composites with periodic interfacial cracks subject to in-plane loading

Intensity Factors for Some Common Piezoelectric Fracture Mechanics Specimens with Conducting Cracks or Electrodes

Fundamental Solution for A Penny-Shaped Crack in A Piezoelectric Medium

A penny-shaped crack in a transversely isotropic piezoelectric layer