CFD-PBE Simulation of Para-Xylene Crystallization Behavior and Process Amplification under Different Operating Conditions
Jiayu Dong,Yinglong Wu,Xuanchen Liu,Chuke Zhang,Simin Wang,Jian Wen
DOI: https://doi.org/10.1021/acs.iecr.3c01272
2023-01-01
Industrial & Engineering Chemistry Research
Abstract:The crystallization technology is one of the most potential ways to produce para-xylene (PX) with high purity, but it has some drawbacks such as low yield and difficult to control crystallization due to the insufficient study of the PX nucleation characteristics and growth behavior. To further investigate this issue, this paper couples the Euler-Euler model and population balance equation (PBE) model, correlates the PX crystallization kinetics, and accurately solves the PBE using the Gaussian integral hypothesis and product difference algorithm, which innovatively and directly simulates the PX suspension crystallization process and yields its multiphysical field characteristics. A multiobjective genetic algorithm is then used to study and optimize the crystallization mechanism and variation patterns, and the PX crystallization amplification law is derived. The results can be concluded as follows. There is a complete internal circulation flow in the crystallizer, and the fluid near the stirring paddle, at the entrance, and at the bottom has the strongest molecular kinetic energy and mixing degree. The crystal concentration and size increase exponentially before 750 s of crystallization, after which the growth trend decreases and gradually reaches dynamic equilibrium. The inlet velocity and stirring speed are inversely connected with the average particle size and particle size distribution interval, while supersaturation is positively correlated with both. The supersaturation has the most obvious effect on the crystal size distribution (CSD) curve. In comparison to the original settings, the optimized operating parameters raise the average particle size of PX by 6.68% and decrease the distribution interval by 38.21%. At last, the sedimentation velocity can be employed as an amplification factor to simplify the amplification process. This paper might serve as a theoretical reference for PX crystallization research and process optimization.