Experimental study of hollow fiber membrane contactor process using aqueous amino acid salt-based absorbents for efficient CO 2 capture
Hyunji Lim,Kwanghwi Kim,Jieun Kim,Hyun Sic Park,Jo Hong Kang,Jinwon Park,Hojun Song
DOI: https://doi.org/10.1016/j.jece.2024.113338
IF: 7.7
2024-06-19
Journal of Environmental Chemical Engineering
Abstract:Gas–liquid membrane contactors are a promising alternative to packed columns that suffer from channeling, bubble formation, and flooding problems. In this study, potassium serinate + piperazine (PSZ) and potassium alaninate + piperazine (PAZ), which are amino acid salts with good CO 2 absorption performances and high surface tensions, are investigated to determine the effects of the operating parameters on the CO 2 removal efficiency, CO 2 absorption flux, CO 2 loading, and overall mass-transfer coefficient in the membrane contactor process. The experimental results demonstrate that the 2.5 M PSZ and 2.5 M PAZ absorbents outperform 2.5 M monoethanolamine (MEA) under various operating conditions, including the gas flow rate, liquid flow rate, CO 2 concentration, and CO 2 -loaded absorbent. Based on these results, an expression for predicting the CO 2 loading from the pH is proposed. The amount of cross-over confirmed that amino acids with high surface tension have better resistance to membrane wetting than 2.5 M MEA. In addition, empirical correlation expressions were established from the results of several operating parameters. The absolute average deviation (AAD) values were 6.50 %, 2.95 %, and 4.71 % for 2.5 M MEA, 2.5 M PSZ, and 2.5 M PAZ, respectively, suggesting good agreement between the theoretical and experimental results.
engineering, chemical, environmental