Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Working Performance and Evaluation Index of Fly-Ash Graded Aggregates

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Study on Pavement Performance of Lime-flyash Micro-bonded Graded Aggregates

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Laboratory Study On Static Strength And Resilient Modulus Of Grading Macadam

Discussion about Mechanism of Fly-Ash on Improving Performance of Cement Stabilized Road Base Material

Concrete Aggregate-Gradation Effect and Strength-Criterion Modification for Fully Graded Hydraulic Concrete

Evaluation on Reactivity of Fly Ash from Different Sources in Alkali Activated System-Progressing Environmentally Construction Through Waste Utilization

Study on Test and Ratio Optimization of Waste Rock-Fly Ash Aggregate Filling Slurry

Study on Performance Tests and the Application of Construction Waste as Subgrade Backfill

Research on Improving Cementitious Material Properties by Adding FineFly Ash

The Performance Evaluation of Asphalt Mortar and Asphalt Mixture Containing Municipal Solid Waste Incineration Fly Ash

Construction Techniques and Quality Test and Evaluation of Lightweight Cellular Concrete Mixed with Fly Ash as Subgrade Material

Influence of Accelerated Carbonation on the Performance of Recycled Concrete Containing Fly Ash, Recycled Coarse Aggregate, and Fine Aggregate

Research on the High Strength Pumping Concretes with Grade-Ⅱ fly Ash and Slag Micro Powder

Improving Performance of Recycled Aggregate Concrete with Superfine Pozzolanic Powders

Performance Evaluation of Pouring Colored Cement-asphalt Composites

Experimental Study on the Influence of Content and Fineness of Fly Ash on the Mechanical Properties of Grouting Slurries

A New Solidification Technology Of Municipal Solid Waste Incineration Fly Ash And Its Application In Asphalt Mixture

Water retention property and microscopic mechanism of shallow soil in inner dump improved by fly ash and polyacrylamide