A New Driving Scheme for Reflective Bistable Cholesteric Liquid Crystal Displays

F. H. Yu,H. S. Kwok

1997-01-01

Abstract:We investigate a new scheme for driving reflective bistable cholesteric displays. It relies on fast switching from the planar to the focal conic state. We show that 1 ms per line scanning speed is possible using conventional passive matrix drivers. In addition, there is no optical delay in the switching process.

What problem does this paper attempt to address?

P‐82: Cumulative Drive Schemes for Bistable Reflective Cholesteric LCDs

Y. M. Zhu,D.‐K. Yang

DOI: https://doi.org/10.1889/1.1833882

1998-01-01

SID Symposium Digest of Technical Papers

Abstract:We have designed drive schemes which can update gradually the content of a bistable reflective cholesteric display. These scheme make use of the “kicking” effect as in addressing STN displays. The cholesteric material is kicked from the planar texture to the focal conic texture step‐by‐step or vice versa. We have also developed a new cholesteric display cell structure which has a 2 ms homeotropic‐planar transition time. Using the new cell structure and the new drive scheme, we have achieved an addressing speed of 0.5 ms/line; the cholesteric display can be operated at a quasi‐video rate.
BISTABLE CHOLESTERIC REFLECTIVE DISPLAYS: Materials and Drive Schemes

Deng-Ke Yang,Xiao-Yang Huang,Yang-Ming Zhu

DOI: https://doi.org/10.1146/annurev.matsci.27.1.117

1997-01-01

Annual Review of Materials Science

Abstract:▪ Abstract Cholesteric liquid crystals possess a helical structure and exhibit two stable states at zero field: the planar texture and the focal conic texture. In the planar texture, they reflect circularly polarized light, whereas in the focal conic texture, they scatter light in forward directions. They can be switched from the planar texture to the focal conic texture by a low-voltage pulse and switched from the focal conic texture to the planar texture by a high-voltage pulse. The wavelength of the reflected light is easily adjusted by varying the pitch of cholesteric liquid crystals. They can be used to make reflective displays that do not need a back light and have a good readability under room-light conditions. We first review the optical properties of bistable cholesteric reflective displays and discuss the techniques used to achieve high contrast and large viewing angle. We then discuss the transitions among the cholesteric textures and the drive schemes used to address bistable cholesteric reflective displays.
EXPERIMENTAL REALIZATION OF REFLECTIVE BISTABLE CHOLESTERIC LIQUID CRYSTAL DISPLAYS WITH NEW DRIVING SCHEME AND LOW DRIVING VOLTAGE

Feihong Yu,Qian Wang,Weimin Pan,Ye Gong,Huiguang Chen,Jun Chen,Haicheng Guo

IF: 0.6

2000-01-01

ACTA PHOTONICA SINICA

Abstract:Through the optimization of liquid crystal par ameters and liquid crystal cell structure，a reflective bistable choleste ric liquid crystal displays with lower driving voltage is fabricated.A new schem e for driving this reflective bistable cholesteric displays is also investigated .It relies on fast switching from the planar to the focal conic state.It is show n th at 1ms per line scanning speed is possible using conventional passive matrix dri vers.In addition，there is no optical delay in the switching process.
Color Sequential Display Based On Stacked Bistable Ferroelectric Lcd

Peizhi Xu,Xihua Li,Wing Sze Chang,Ching Sze Chong,Kwok Yim Wong,Vladimir Chigrinov

2006-01-01

Abstract:A new color sequential display based on stacked bistable ferroelectric liquid crystal (FLC) has been proposed. The optimized parameters for the new structure including the orientation of the polarizers and ferroelectric liquid crystal cells, the cell gap of the cells have been found. The optical performance and color coordinates of the output of the system have been. examined in simulation. The results show that bistable FLC has a good potential in color sequential display applications.
P-232L: Late-News Poster: New Results on Bistable Photoaligned Ferroelectric LCDs: Grey Scale Generation, Stabilization and Passive Driving Scheme

Xihua Li,Anatoli Muravsky,Alexander Muravsky,Hon Lung Cheung,Peizhi Xu,Eugene Pozhidaev,Vladimir Chigrinov

DOI: https://doi.org/10.1889/1.2433660

2006-01-01

SID Symposium Digest of Technical Papers

Abstract:The principles for intrinsic greyscale generation and stabilization of bistable photoaligned FLCD are discussed and investigated. In order to realize these principles, the passive matrix driving scheme for FLCD is proposed and studied. Passive 160×160 matrix addressing photoaligned 5μm reflective FLC display (48mm×46mm) with high contrast and 4 memorized grey scale levels is demonstrated. Images can be saved for very long time without any power supply. 15V driving voltage is only needed to refresh information, which is impressive and desirable for low power consumption display such as PDA, e-paper etc.
Color Switching In Bistable Ferroelectric Lcds

Peizhi Xu,Sergiy Valyukh,Xihua Li,Vladimir Chigrinov

2005-01-01

Abstract:Memorizable color switching in bistable ferroelectric liquid crystal displays for transmissive mode is studied. Optimal configuration parameters with retardation film taken into account are obtained in simulation. Prototype cells with memorized color are fabricated accordingly based on the simulation results, which agree well with theoretical results and show very good quality.
Mechanism of switching between planar and focal conic states in a bistable cholesteric-liquid-crystal reflective display

Xinfang Zhang,Ziyuan Zhou,Suman Halder,Lang Hu,Deng-Ke Yang

DOI: https://doi.org/10.1103/physrevapplied.22.044020

IF: 4.6

2024-10-09

Physical Review Applied

Abstract:The bistable reflective cholesteric-liquid-crystal display exhibits two stable states with contrasting optical properties at zero voltage. One is the reflecting planar state where the helical axis is perpendicular to the display substrate, and the other is the nonreflecting focal conic state where t... [Phys. Rev. Applied 22, 044020] Published Tue Oct 08, 2024

physics, applied
Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Hin Yu Mak,Xihua Li,Peizhi Xu,Tao Du,Vladimir G. Chigrinov

DOI: https://doi.org/10.1889/1.2976656

2008-01-01

Journal of the Society for Information Display

Abstract:A ferroelectric liquid-crystal (FLC) display was optimized as a transflective liquid-crystal display (LCD). In this configuration, the single-cell-gap approach was considered. The optimized configuration exhibits a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. Because no double-cell-gap structure, no subpixel separation, and no patterning polarizers and retarders are included in the configuration, the configuration is easy to fabricate and also possess a perfect dark state. This configuration is also suitable for bistable applications.
Fast and High-Contrast Liquid-Crystal Shutters with Low Power Consumption Based on an Optical-Mode-Interference Cell

Peizhi Xu,Xihua Li,V. G. Chigrinov,S. A. Studentsov

DOI: https://doi.org/10.1364/ao.45.004020

IF: 1.9

2006-01-01

Applied Optics

Abstract:Three electro-optical modes of nematic liquid crystal (LC) were investigated as applications for LC shutters: the waveguide mode (TN), optical mode interference (OMI), and supertwist nematic (STN). The characteristics of the three modes under dynamic driving were simulated by solving the Ericksen-Leslie hydrodynamic equations numerically. Prototypes of the three types of LC were fabricated for verification. The experimental data show good coincidence with the simulation results. Among the three LC modes, the OMI was found to have the greatest potential for LC shutter applications. The prototype that used the OMI mode showed high contrast, fast response times, low power consumption owing to the pseudomemory effect under an optimal driving scheme, and a low optical retardation of the LC cell.
Reflectance-enhanced liquid crystal displays and thermochromic multi-color patterning

Jiasong Zheng,Zemin He,Chunsheng Li,Zongcheng Miao,Dong Wang,Yi Luan,Yuzhan Li,Yuzhen Zhao,Hui Cao,Wanli He,Zhou Yang,Jiasong Zheng,Zemin He,Chunsheng Li,Zongcheng Miao,Dong Wang,Yi Luan,Yuzhan Li,Yuzhen Zhao,Hui Cao,Wanli He,Zhou Yang

DOI: https://doi.org/10.1016/j.dyepig.2022.110598

IF: 5.122

2022-09-01

Dyes and Pigments

Abstract:This paper presents a reflective liquid crystal display (LCD) combined with thermochromic liquid crystal microcapsules to enhance the electro-optical performance of the LCD and to empower new driving modes. The prepared reflectance-enhanced liquid crystal display (Re-LCD) possesses a bilayer structure, with the upper layer being a polymer-stabilized liquid crystal layer prepared by UV-induced phase separation and the lower layer being a thermochromic layer prepared by coating with thermochromic liquid crystal microcapsules. The effect of chiral compound content on the reflection wavelength of liquid crystal center was investigated. After that, the effects of monomer ratio, polymerization time and spin coating speed on the electro-optical properties and morphology of Re-LCD were investigated comprehensively by three sets of experiments. The results show that the combination of LCD and thermochromic materials has a synergistic effect in display, and the prepared Re-LCD shows more than 51% reflectance compared with typical LCD. The multi-field driving function allows the Re-LCD to rapidly switch optical states by force, electric, and temperature fields and obtain multi-color patterns during the driving process. This provides new application possibilities for LCD.

engineering, chemical,chemistry, applied,materials science, textiles
Fast Horizontal Switching Of Bistable Chiral Splay Nematic Liquid Crystal With Patterned Electrodes

Chao Ping Chen,Chul Gyu Jhun,Tae-Hoon Yoon,Jae Chang Kim

2006-01-01

Abstract:Bistable chiral splay nematic (BCSN) has been added to the repertoire of LCDs as a novel bistable device. Unlike BiNem, BCSN belongs to the bulk switching bistable LCD and allows both vertical and horizontal operation. For each operation, it requires the transition from splay state to pi twist state or vice versa. In this letter, a practical method of realizing fast horizontal switching by using patterned electrodes is to be proposed.
Viewing Angle Switching of Tristate Liquid Crystal Display

Chao Ping Chen,Chul Gyu Jhun,Tae-Hoon Yoon,Jae Chang Kim

DOI: https://doi.org/10.1143/jjap.46.l676

IF: 1.5

2007-01-01

Japanese Journal of Applied Physics

Abstract:A tristate liquid crystal display characterized by two optically distinct dark states and one bright state has been presented. These two dark states contribute to two different viewing angles, of which one is used for wide viewing mode operation, whereas the other one for narrow viewing mode operation. Each viewing mode can be directly selected electrically from two sets of driving voltage. We demonstrate a vertically aligned nematic cell as a paradigm to explain the principle of viewing angle switching. Its appealing feature is that both the information sharing and the privacy protection are supported simultaneously on a single panel of liquid crystal display.
A bistable ion-doped cholesteric liquid crystal smart window with a small amount of polymer

Xiaoshuai Li,Meishan Zhang,Chi Zhang,Rui Niu,Hongmei Ma,Yubao Sun,Yubao Sun

DOI: https://doi.org/10.1016/j.optmat.2023.113659

IF: 3.754

2023-04-01

Optical Materials

Abstract:Bistable liquid crystal devices, which require electricity only at the switching processes of the two states, have advantages in energy saving and safety compared with monostable liquid crystal devices. Due to electrohydrodynamic and dielectric effects, the ion-doped cholesteric liquid crystal can switch between a focal conic state and a planar state with different frequencies of the driving voltage. However, the cholesteric liquid crystal that self-assembles from the dynamic scattering state always has a poor focal conic state, resulting in a low contrast ratio. This paper presents a bistable polymer-stabilized ion-doped cholesteric liquid crystal device. The introduction of a small amount of polymer network can greatly enhance the light scattering capabilities of the focal conic state, endowing the device with excellent electro-optic performance. The electro-optical properties of the device are investigated with the various content of monomer and chiral dopant, and rotational viscosity of liquid crystal. Liquid crystal with a low rotational viscosity coefficient is beneficial to the formation of a good polymer network. The pitch induced by chiral dopant impacts the formation process of the polymer network, which subsequently affects the electro-optical properties. The bistable device has a low driving voltage and a high contrast ratio, making it ideal for use in smart windows.

materials science, multidisciplinary,optics
Review on Polymer-Stabilized Short-Pitch Cholesteric Liquid Crystal Displays

Guanjun Tan,Yun-Han Lee,Fangwang Gou,Haiwei Chen,Yuge Huang,Yi-Fen Lan,Cheng-Yeh Tsai,Shin-Tson Wu

DOI: https://doi.org/10.1088/1361-6463/aa916a

2017-01-01

Journal of Physics D Applied Physics

Abstract:Submillisecond response times and low operation voltage are critical to next generation liquid crystal display and photonic devices. In this paper, we review the recent progress of three fast-response short-pitch cholesteric liquid crystal modes: blue phase (BP), uniform standing helix (USH), and uniform lying helix (ULH). This review starts with a brief introduction of device structures and working principles, and then highlights two competing electro-optical effects: dielectric effect and flexoelectric effect. Next, we compare their electro-optical behaviors, response time, temperature dependence, and contrast ratio. Based on our established simulation model, we are able to optimize the phase compensation scheme for improving the viewing angle and gamma shift of USH and ULH modes. Finally, we analyze some major challenges, which remain to be overcome before the widespread applications of these liquid crystal devices can be realized.
2-Face Viewable Liquid Crystal Display by In-Plane Switching

Chao Ping Chen,Te-Chen Chung,Xiaojun Guo,Yikai Su

DOI: https://doi.org/10.1080/15421406.2011.569663

IF: 0.7

2011-01-01

Molecular Crystals and Liquid Crystals

Abstract:We present a liquid crystal display that allows two faces of the display viewed at opposite directions to show different image/video content simultaneously. This device is characterized by a 2-domain mid-tilted liquid crystal, which is addressed by the in-plane switching.
A cholesteric liquid crystal smart window with a low operating voltage

Seung-Won Oh,Seong-Min Ji,Chan-Hee Han,Tae-Hoon Yoon

DOI: https://doi.org/10.1016/j.dyepig.2021.109843

IF: 5.122

2022-01-01

Dyes and Pigments

Abstract:A dye-doped cholesteric liquid crystal smart window with a haze-free opaque state is demonstrated. We designed a random stripe pattern in the cholesteric phase, known as the fingerprint (FP) texture, as an initial state (opaque state). In the theoretical calculation of the LC alignment states, although the transmittance of the FP state is slightly higher than that of the twisted state (planar state), it is much lower than homogeneously aligned states. Moreover, we confirmed the proposed LC cell shows the lowest operating voltage (4 V) among guest-host liquid crystal cells because of vertical anchoring at the surfaces.

engineering, chemical,chemistry, applied,materials science, textiles
Reflective Twisted Nematic Liquid Crystal Displays. II. Elimination of Retardation Film and Rear Polarizer

FH Yu,J Chen,ST Tang,HS Kwok

DOI: https://doi.org/10.1063/1.366408

IF: 2.877

1997-01-01

Journal of Applied Physics

Abstract:Reflective twisted nematic liquid crystal displays consisting of just one input polarizer, a liquid crystal cell, and a rear reflector are discussed. We first show that all such display modes reported in the literature can be depicted systematically in a series of parameter space diagrams. Then by making use of such diagrams as a guide, we show that other new high quality reflective display modes can be obtained. The three parameters that are varied are the input polarizer angle α, the liquid crystal twist angle φ, and the cell gap–liquid crystal birefringence product dΔn. A full numerical simulation which takes into account of the liquid crystal director deformation under the application of an electric field was used to optimize such displays. Experimental results agree well with the theoretical predictions.
P.104: 2‐Face Viewable Display Using Dye‐Doped Liquid Crystal

chao ping chen,hongjing li,zhenghong he,xiao li,yuan xiong,wei hu,yikai su,chul gyu jhun

DOI: https://doi.org/10.1002/j.2168-0159.2013.tb06498.x

2013-01-01

SID Symposium Digest of Technical Papers

Abstract:We present a liquid crystal display that allows two faces of the display viewed at opposite directions to show different image/video content simultaneously. This device is characterized by a dye‐doped liquid crystal, which can eliminate the need for polarizers and offer a very low crosstalk between two separated viewing angles.
Bicolor Tuning and Hyper-Reflective Color Switching Based on Two Stacked Cholesteric Liquid Crystal Cells with Asymmetric Electrothermal Optical Responses

Hsin-Kai Tseng,Po-Chang Wu,Wei Lee

DOI: https://doi.org/10.3390/molecules29112607

IF: 4.6

2024-06-02

Molecules

Abstract:We propose a double-cell cholesteric liquid crystal (CLC) device composed of a left-handed (LH) CLC cell with a pair of sheet electrodes and a right-handed (RH) CLC cell with a tri-electrode configuration characterized by a sheet electrode on the top and an interdigitated electrode on the bottom substrates. Bi-reflected color tuning and hyper-reflective color switching are revealed from this cell stack via the electrothermal control of the central wavelengths of the LH- and RH-bandgaps by voltage-induced pseudo-dielectric heating. The two CLCs are thermally sensitive and exhibit overlapped bandgaps in the field-off state with nearly identical temperature dependence, resulting in a hyper-reflective color at 720 nm at 23.4 °C and 380 nm at 29.8 °C. Upon the application of 4 Vrms at 2 MHz across the stacked device to induce pseudo-dielectric heating, two reflective colors can be resolved due to asymmetrical temperature elevations. Accordingly, the difference in wavelength between the two colors increases with increasing voltage through a series cell connection, while maintaining approximately constant via a parallel connection. This study provides a feasible pathway to developing a multifunctional device with electrothermally tunable bi-reflected and hyper-reflective states based on two conventional cell geometries, which is promising for lasers and color-related display applications.

chemistry, multidisciplinary,biochemistry & molecular biology
Effects of Controllable Defects on the Bistable Properties of Cholesteric Liquid Crystal Materials and the Potential Application

YU Mei-na,ZOU Cheng,GAO Yan-zi,YANG Huai

DOI: https://doi.org/10.13374/j.issn2095-9389.2021.06.30.004

2022-01-01

Chinese Journal of Engineering

Abstract:The worldwide energy crisis necessitates the urgent need for energy conservation, especially in buildings whose energy consumption has already surpassed that of transportation and industrial sectors. Most of the energy loss in buildings is related to windows because their heat transfer coefficient is different from other building fabrics. Therefore, smart window technologies are proposed to eliminate energy usage, among which cholesteric liquid crystals show great potential due to their electrically controlled bistable properties. Cholesteric liquid crystals are characterized by two stable states: (1) the planar state that shows selective reflection or high light transmittance and (2) focal conic state that scatters incident light and shows opaque appearance. To realize a bistable state in which both the planar state and the focal conic state could be maintained without an external field is of vital importance for the application, since it could save considerable energy. In this study, oily streak defects and stability of the focal conic state are controlled by introducing a type of bent molecular materials. Effects of various factors on the bistable states are investigated, and the potential applications are explored. Results show that the bent molecule CB7CB could diminish the oily streak defects in the planar state and reduce the domain size of the focal conic state because it has a smaller bent elastic constant. The electro-optical test implies that bistable states are acquired in the composite containing CB7CB. Factors such as the anchoring strength of the alignment layer and cell thickness are then investigated and results reveal that strong anchoring and thinner cell thickness are not favored by the focal conic state. Moreover, bistable states could be stabilized by introducing a small amount of polymer followed by polymerization. Based on the above guidelines, colorless and colorful bistable light shutters are demonstrated, which could maintain both transparent and opaque states without any external electric field. The light shutter saves more energy than the one based on polymer-dispersed liquid crystals. Other potential applications, such as bistable displays and electronic label could also be realized based on the bistable property.

A New Driving Scheme for Reflective Bistable Cholesteric Liquid Crystal Displays

P‐82: Cumulative Drive Schemes for Bistable Reflective Cholesteric LCDs

BISTABLE CHOLESTERIC REFLECTIVE DISPLAYS: Materials and Drive Schemes

EXPERIMENTAL REALIZATION OF REFLECTIVE BISTABLE CHOLESTERIC LIQUID CRYSTAL DISPLAYS WITH NEW DRIVING SCHEME AND LOW DRIVING VOLTAGE

Color Sequential Display Based On Stacked Bistable Ferroelectric Lcd

P-232L: Late-News Poster: New Results on Bistable Photoaligned Ferroelectric LCDs: Grey Scale Generation, Stabilization and Passive Driving Scheme

Color Switching In Bistable Ferroelectric Lcds

Mechanism of switching between planar and focal conic states in a bistable cholesteric-liquid-crystal reflective display

Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Fast and High-Contrast Liquid-Crystal Shutters with Low Power Consumption Based on an Optical-Mode-Interference Cell

Reflectance-enhanced liquid crystal displays and thermochromic multi-color patterning

Fast Horizontal Switching Of Bistable Chiral Splay Nematic Liquid Crystal With Patterned Electrodes

Viewing Angle Switching of Tristate Liquid Crystal Display

A bistable ion-doped cholesteric liquid crystal smart window with a small amount of polymer

Review on Polymer-Stabilized Short-Pitch Cholesteric Liquid Crystal Displays

2-Face Viewable Liquid Crystal Display by In-Plane Switching

A cholesteric liquid crystal smart window with a low operating voltage

Reflective Twisted Nematic Liquid Crystal Displays. II. Elimination of Retardation Film and Rear Polarizer

P.104: 2‐Face Viewable Display Using Dye‐Doped Liquid Crystal

Bicolor Tuning and Hyper-Reflective Color Switching Based on Two Stacked Cholesteric Liquid Crystal Cells with Asymmetric Electrothermal Optical Responses

Effects of Controllable Defects on the Bistable Properties of Cholesteric Liquid Crystal Materials and the Potential Application