Abstract:The development of physical modeling for mega engineering prototypes requires sophisticated use of the capability of current centrifuge facilities. In this study, centrifuge model tests were performed to investigate the dynamic response of high fill slope by using generalized scaling law in an improved way. Firstly the two-stage generalized scaling law was partly re-organized by considering the separate similitude of dynamic strain for the virtual 1 g field, to solve the inherent problem of the scaling of soil strain when the derived prototype strain exceeded some important thresholds. Then a series of centrifuge model tests were conducted under different centrifugal accelerations to model a high fill slope with a prototype height of 100 m by the approach of "modeling of models". Dynamic responses under sine waves with different amplitudes were monitored and the re-organized generalized scaling law was validated for nonlinear dynamic response with shear strain less than 1%. It was observed that site amplification of high fill slope was affected by both soil nonlinearity and soil strata non-uniformity, where soil nonlinearity led to smaller acceleration amplification under stronger excitation and soil strata non-uniformity contributed to the acceleration de-amplification and larger displacement amplification at the weak sublayer. The large dynamic displacement near the slope surface consequently contributes to the development of lateral cracks after strong shaking. Seismic response under earthquake motions revealed that high fill slope with inclined non-uniform strata was characterized by multiple vibration modes and lower fundamental frequency, which was more vulnerable to earthquake motions with abundant frequency components. This study provides a more physically meaningful use of the similitude of dynamic stress-strain relation in centrifuge modeling for large-scale geotechnical problems under dynamic loadings.

New image analysis-based displacement-measurement system for geotechnical centrifuge modeling tests

Displacement Measurement Using Image Analysis in Centrifuge Modeling of Slopes

An Fiber Bragg Grating-Based Monitoring System for Slope Deformation Studies in Geotechnical Centrifuges.

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Analysis Method for Lateral Spreading Ground Displacement in Centrifuge Shaking Table Tests

CENTRIFUGE MODEL TESTS ON A COHESIVE SOIL SLOPE UNDER EXCAVATION CONDITIONS

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions

A Modified Generalized Scaling Law for the Similitude of Dynamic Strain in Centrifuge Modeling

Geotechnical Centrifuge Shaking Table Tests and Numerical Simulation of Soil-Structure

Centrifuge Modeling of Dynamic Response of High Fill Slope by Using Generalized Scaling Law

Study Of Stress And Displacement Fields In Centrifuge Modeling Of Slope Progressive Failure

Two-dimensional Deformation Measurement in the Centrifuge Model Test Using Particle Image Velocimetry

Centrifuge Modeling of a Saturated Clay Ground under Cyclic Loading

Internal Deformation Monitoring for Centrifuge Slope Model with Embedded FBG Arrays

Dynamic Centrifuge Model Tests on an Unconfined Soil Foundation

Image analysis measurement of soil particle movement during a soil–structure interface test

Application of Geotechnical Centrifuges in Geotechnical Engineering Education

Centrifuge modeling of the failure of geotextile-reinforced slopes

Centrifuge Model Test Study of Behavior of Foundation Pit

Fiber Bragg grating test system and model tests based on geotechnical centrifuge

Centrifuge Model Tests on Excavation-Induced Failure of Slopes