Abstract:Linear induction launchers (LILs) are a specific subtype of linear motors. However, LILs are air-core machines that consistently operate in a transient rather than a steady state. Moreover, their operating currents and voltages exceed those of traditional machines. The execution time of LILs often remains within a few milliseconds, and it is essential to manage extremely high-power levels quickly. The control methods for LILs differ from those used for regular machines due to the differences from conventional linear motors. In this respect, there are still challenges to be overcome in power systems designed for LILs in the literature. This study has developed a novel power energization system to address these challenges, particularly in terms of inadequate V/f control and the unnecessary energization of regions along the barrel where no projectile is present. It focuses on the system's design using multi-stage H-bridge inverters to produce a sinusoidal current for section-by-section polyphase excitation. An FPGA-based electronics control system generates bipolar PWM fiber-optical signals for IGBT switches for scalar V/f control of the inverters. Distributed multi-inverters power each stage of the launcher's barrel and are controlled by the FPGA to create the travelling electromagnetic wave package. Three-dimensional FEM analysis is used for observation of the trigger timing to ensure positive force along the barrel. By driving each inverter independently, the coils on the barrel are excited sequentially based on the position of the projectile. This study also explains the implementation of a laboratory-scale barrel prototype, a 40 mm aluminum projectile, its power electronics, and the control part of the multi-stage inverters. In this study, 3300 V–1200 A IGBTs and 8.8 mF–2000 V DC-Link capacitors were used in the H-bridge inverter modules. Experimental studies have been conducted on the launcher, and the results obtained, including achieving a velocity of 30 m/s, are consistent with the electromagnetic simulations. It has been observed that the launcher, powered by the proposed system, is approximately 57.14% more efficient compared to the version energized by a single inverter.

Optimization and Analysis of Linear Induction Launcher

Simulation of an Electromagnetic Launcher with a Superconducting Inductive Pulsed Power Supply

Analysis of the Influence of System Parameters on Launch Performance of Electromagnetic Induction Coil Launcher

Design and Implementation of a Linear Induction Launcher with a New Excitation System Utilizing Multi-Stage Inverters

Analysis of Parameter Sensitivity of Induction Coil Launcher Based on Orthogonal Experimental Method

Optimization Design of Linear Induction Motor and Study of the 3-Phase Asymmetry Phenomenon

Dynamic Analysis of Integrated Launch Package in the Barrel of Railgun

Modeling and Parameter Optimization of Coilgun System with Inductive Energy Storage Supply

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Dynamic Modeling and Simulation of Gatling Gun with Muzzle Assistant-Rotating and Recoil Absorber

Study Of A Single-Stage Electromagnetic Launcher System Using Pancake Coil

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Analysis of the force characteristic on the armature of inductive coil launcher and trigger strategy

Transient simulation of helical coil electromagnetic launchers

Research and Optimization of ALIP Performance Based on Improved Equivalent Circuit

Structure Innovation and Material Optimization of Annular Linear Induction Electromagnetic Pump Based on Temperature Field Constraints

Numerical simulation and optimized design of a launching system with a novel charge structure

Evaluation of a Superconducting Augmented Rail-Type Electromagnetic Launch System

Dynamic Inductance Gradient Analysis of Series-Enhanced Four-Rail Electromagnetic Launcher

Research on the Control Strategy of Multistage Synchronous Inductive Coil Launcher