Abstract:The electrical properties of the active precursor ions play an important role in the microstructure of the hydrodesulfurization (HDS) catalyst. Herein, this study first presents a simple strategy to adjust the charge of Mo-based nanoparticles (Mo-NPs) by changing the content of the organic complexing agent dodecyltrimethylammonium bromide (DTAB) and then investigates the effects of Mo-NPs with different charges on HDS catalysts. The results show that the zeta (zeta) potential of the Mo-NPs mutates from negative to positive with the DTA+/Mo molar ratio increasing to 4/7. Compared with conventional electronegative Mo precursors, the electropositive Mo-NPs could eliminate the electrostatic difference with the promoter nickel ions (Ni2+); thus, the Mo-NPs and Ni2+ could synchronously diffuse and co-load into the electropositive pore of gamma-Al2O3 by hydrothermal deposition, resulting in a more uniform distribution of active species (standard deviation of slab length = 0.51 vs. 1.05). Meanwhile, the isolating effect of amorphous carbonaceous species from the thermal decomposition of the organic complexing agent on the active phases was directly observed, and the stabilizer role was powerfully verified. Therefore, the resultant catalyst not only realized better Ni-promoted effects (synergetic factor = 7.5 vs. 5.3) but also exhibited excellent active phase morphology with much shorter length, higher stacking number and better dispersion. Finally, compared with the catalyst prepared from the conventional precursor, i.e. Mo7O246-, the Mo-NPs-derived catalyst shows the more excellent HDS activity of dibenzothiophene (reaction rate constant kHDS = 7.51 vs. 1.06 x 10-7 mol g-1 s-1; turnover frequency TOF = 5.56 vs. 1.43 h-1) and obviously enhanced HDS ratio of heavy coking diesel (99.8% vs. 96.2%). Besides, the resulting catalyst also holds a much higher HDS ratio as compared with the industrial catalyst (99.8% vs. 97.8%), showing a great potential in industrial application. The present work sheds light on the rational design of supported nanosized catalysts and provides a deeper understanding of the complicated structure-function relations. Using electropositive Mo-based nanoparticles (Mo-NPs) as precursor could realize the resulting catalyst with more uniform, shorter, higher layered, better Ni-promoted, and stable MoS2 slabs, thus holding excellent HDS performance.

INFLUENCE OF Na2O AND ITS INTRODUCTION SEQUENCE ON THE HYDRODESULFURIZATION PERFORMANCE OF Ni-Mo/MCM-41

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Niobium Modification Effects on Hydrodesulfurization of 4,6-DMDBT Catalyzed on Ni-Mo-S Active Sites: A Combination of Experiments and Theoretical Study

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

4,6-Dimethyldibenzothiophene Hydrodesulfurization on Nickel-Modified USY-Supported NiMoS Catalysts: Effects of Modification Method

Regulating the Microenvironments and the D-Band Center of Hierarchical Nimos/Ts-1 Catalyst by Zro2 to Enhance the Hydrodesulfurization Performance of Dibenzothiophene

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Effects of Ga- and P-modified USY-based NiMoS catalysts on ultra-deep hydrodesulfurization for FCC diesels

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Effects of Ni–Al2O3 Interaction on NiMo/Al2O3 Hydrodesulfurization Catalysts

Promoting effects of SO(4)(2-)on a NiMo/gamma-Al(2)O(3)hydrodesulfurization catalyst

Promoting effects of SO42− on a NiMo/γ-Al2O3 hydrodesulfurization catalyst

A Study on the Role of Ni Atoms in the HDN Activity of NiMoS2/Al2O3 Catalyst

Preparation of Supported Hydrodesulfurization Catalysts with Enhanced Performance Using Mo-based Inorganic–organic Hybrid Nanocrystals As a Superior Precursor

A novel and facile strategy for the preparation of highly reactive NiMo/γ-Al 2 O 3 hydrodesulfurization catalyst

Fabrication of Well-Structured NiMo Hydrodesulfurization Catalysts Using Electropositive Mo-based Nanoparticles

Preparation of Hydrodesulfurization Catalysts Using MoS3 Nanoparticles As a Precursor

Influence of Ni on the active phase and hydrodenitrogenation and hydrodesulfurization activities of MoS2 catalysts

Effect of different silica on the hydrodesulfurization performance of NiMo catalyst

Active phase morphology engineering of NiMo/Al 2 O 3 through La introduction for boosting hydrodesulfurization of 4,6-DMDBT

Sulfured NiMo catalysts on TiO2-Nb2O5 nanocomposites for efficient hydrodesulfurization performance