Abstract:Highlights • The preparation methods and difficulties of the Mg/Al bimetal were introduced. • The research progress of the interfacial regulation and strengthening of the Mg/Al bimetal was summarized. • The future development direction of the Mg/Al bimetal was prospected. • This paper will provide some new ideas for the development and application of the Mg/Al bimetal. Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace, weapons, digital products and so on. The compound casting has the characteristics of low cost, easy to achieve metallurgical combination and suitable for the preparation of complex bimetallic parts. However, bimetallic joint strength is low due to differences of physical properties between Al and Mg, oxide film on metallic surface and interfacial Al-Mg IMCs, which is closely related to the interfacial microstructure and properties. Therefore, how to control the interface of the bimetal to achieve performance enhancement is the focus and difficulty in this field. At present, there are mainly the following strengthening methods. First, the "zincate galvanizing" and "electrolytic polishing+anodic oxidation" technology were exert on the surface of Al alloy to remove and break the oxide film, which improved the wettability between Al and Mg. Second, the undesirable Al-Mg IMCs were reduce or elimination by adding the interlayers (Zn, Ni and Ni-Cu). Thirdly, the evolution process of interfacial microstructure was changed and fine strengthening phases were formed by adding Si element to Al alloy or rare earth element to Mg alloy. Fourthly, mechanical vibration and ultrasonic vibration were applied in the process of the filling and solidification to refine and homogenize the interfacial structure. Finally, some other methods, including secondary rolling, thermal modification, heat treatment and constructing exterior 3D morphology, also can be used to regulate the interfacial microstructure and compositions. The above strengthening methods can be used alone or in combination to achieve bimetallic strengthening. Finally, the future development direction of the Mg/Al bimetal is prospected, which provides some new ideas for the development and application of the Mg/Al bimetal.

Research Progress on Brittleness of Molybdenum and the Technologies of Its Strengthening and Toughening

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Microstructure and Mechanical Properties of Unalloyed Molybdenum Fabricated Via Wire Arc Additive Manufacturing

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

The Application of in Situ TEM on the Grain Boundary Brittleness of Precipitation-Strengthened Ni-based Superalloys: Recent Progress and Perspective

Recent Progress on Regulating Strategies for the Strengthening and Toughening of High-Strength Aluminum Alloys

The Microstructure and Cracking Behaviors of Pure Molybdenum Fabricated by Selective Laser Melting

Research about the Microcrack Mechanisms in Molybdenum and Corresponding Suppression Strategies During Laser Additive Manufacturing Process

Strengthening Mechanisms and Thermal Models of Chemically Incompatible Metals (Mo/W‐Cu): A Review

Strengthening-toughening methods and mechanisms of Mg–Li alloy: a review

Research Progress on Microstructure Evolution and Strengthening-Toughening Mechanism of Mg Alloys by Extrusion

Review of Research Progress on Mo-Si-B Alloys

Toughening Mechanism of Mullite Matrix Composites: A Review

ZrTiO4 secondary phase effects on ductility and toughness of molybdenum alloys

EFFECT OF MOLYBDENUM ON DELAYED FRACTURE BEHAVIOR OF HIGH STRENGTH STEEL

Revealing the room temperature superplasticity in bulk recrystallized molybdenum

Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel

Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures

Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: A review

Achieving an unprecedented strength-ductility balance of molybdenum alloy by homogeneously distributing yttrium-cerium oxide

Application And Research Progress Of Body-Centered-Cubic Ti-Mo Base Alloys