Abstract:In this paper, we reviewed recent systematic studies of using ZnO nanotetrapods for photoanodes of dye-sensitized solar cells (DSSCs) in our group. First, the efficiency of power conversion was obtained by more than 3.27% by changes of conditions of dye loading and film thickness of ZnO nanotetrapod. Short-circuit photocurrent densities (J sc) increased with the film thickness, J sc would not be saturation even the film thickness was greater than 35 μm. The photoanode architecture had been charactered by good crystallinity, network forming ability, and limited electron-hopping interjunctions. Next, DSSCs with high efficiency was devised by infiltrating SnO2 nanoparticles into the ZnO nanotetrapods photoanodes. Due to material advantages of both constituents described as above, the composite photoanodes exhibited extremely large roughness factors (RF s), good charge collection, and tunable light scattering properties. By varying the composition of the composite photoanodes, we had achieved an efficiency of 6.31% by striking a balance between high efficiency of charge collection for SnO2 nanoparticles rich films and high light scattering ability for ZnO nanotetrapods rich films. An ultrathin layer of ZnO was found to form spontaneously on the SnO2 nanoparticles, which primarily was responsible for enhancing open-circuit photovoltage (V oc). We also identified that recombination in SnO2/ZnO composite films was mainly determined by ZnO shell condition on SnO2, whereas electron transport was greatly influenced by the morphologies and sizes of ZnO crystalline additives. Finally, we applied the composite photoanodes of SnO2 nanoparticles/ZnO nanotetrapods to flexible DSSCs by low temperature technique of “acetic acid gelation-mechanical press-ammonia activation.” The efficiency has been achieved by 4.91% on ITO-coated polyethylenenaphtalate substrate. The formation of a thin ZnO shell on SnO2 nanoparticles, after ammonia activation, was also found to be critical to boosting V oc and to improving inter-particles contacts. Mechanical press, apart from enhancing film durability, also significantly improved charge collection. ZnO nanotetrapods had been demonstrated to be a better additive than ZnO particles for the improvement of charge collection in SnO2/ZnO composite photoanodes regardless of whether they were calcined.

A New Photoanode Architecture of Dye Sensitized Solar Cell Based on ZnO Nanotetrapods with No Need for Calcination

A new ZnO nanotetrapods/SnO2 nanoparticles composite photoanode for high efficiency flexible dye-sensitized solar cells.

Dye-sensitized solar cells based on ZnO nanotetrapods

Polydisperse Spindle-Shaped ZnO Particles with Their Packing Micropores in the Photoanode for Highly Efficient Quasi-Solid Dye-Sensitized Solar Cells

Branched ZnO nanostructures as building blocks of photoelectrodes for efficient solar energy conversion.

ZnO nanocones with high-index {101̄1} facets for enhanced energy conversion efficiency of dye-sensitized solar cells

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

ZnO Nanocones with High-Index {101̅1} Facets for Enhanced Energy Conversion Efficiency of Dye-Sensitized Solar Cells

Nanorod-Nanosheet Hierarchically Structured Zno Crystals on Zinc Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

High-efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/zno Nanotetrapods.

Quantum-confined ZnO Nanoshell Photoanodes for Mesoscopic Solar Cells.

Unique Zn-Doped Sno2 Nano-Echinus with Excellent Electron Transport and Light Harvesting Properties As Photoanode Materials for High Performance Dye-Sensitized Solar Cell

Facile synthesis of ZnO nanocrystals via a solid state reaction for high performance plastic dye-sensitized solar cells

An Efficient DSSC Based on ZnO Nanowire Photo-Anodes and a New D-π-A Organic Dye

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

Synthesis of zinc oxide and tin oxide (ZnO/SnO2) nanocomposite for photoanode applications in dye sensitized solar cell

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer

Synthesis and Characterization of ZnO Nano-Plant-Like Electrodes

A Double Layered Photoanode Made of Highly Crystalline Tio2 Nanooctahedra and Agglutinated Mesoporous Tio2 Microspheres for High Efficiency Dye Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers