Abstract:In this paper, a boundary element method is developed for solving the problems of 2D solids with fluid-filled pores. The solid is assumed as linear elastic, which contains many fluid-filled pores of various shapes, and the fluid filling the pores is assumed to be linear compressible. Two different approaches, named superposition method and multi-subdomain method have been presented. The first one is based on the principle of superposition, in which all the pressures in the fluid-filled pores will be determined first, and then all the other boundary unknowns can be computed. In the other approach, the subdomains of the fluid in pores are solved to obtain the relation of the interface displacements with the interface pressure first, and then all the boundary unknowns, including the fluid pressure in each pore, can be solved simultaneously. Two simple examples of the 2D solids containing one circular fluid-filled pore are applied to verify the accuracy and to show the efficiency of the presented methods. And then, the effective elastic modulus and effective Poisson’s ratio are simulated based on several models of the 2D solids containing 100 randomly distributed circular or elliptical fluid-filled pores. The numerical results computed by the two schemes have nearly the same accuracy, whereas the multi-subdomain method has higher computational efficiency than the superposition method. Some differences between the results obtained by the BEM and those given by Kachanov’s method in the literature have been observed, which will be further investigated in the future work.

Direct Numerical Simulation of Effective Elastic Properties of 2-D Solids with Circular Holes

Study on Applicability of Modal Analysis of Thin Finite Length Cylindrical Shells Using Wave Propagation Approach

Numerical Simulation of 3-D Elastic Moduli with Elliptical Cracks Using FM-DBEM

Simulation of Effective Elastic Properties of Solids with Fluid-Filled Pores Using Boundary Element Method

Numerical Simulation of Elastic Behaviour and Failure Processes in Heterogeneous Material

Numerical Simulation of the Mechanical Properties and Failure of Heterogeneous Elasto-Plastic Materials

BEM Simulation of 2D Solids with Randomly Distributed Elliptic Inclusions

Simulation of 2D Elastic Bodies with Randomly Distributed Circular Inclusions Using the BEM

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Bem for Simulation of A 2d Elastic Body with Randomly Distributed Circular Inclusions

Numerical Determination of Effective Properties of Voided Piezoelectric Materials Using BNM

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Atomistic and continuum simulation on extension behaviour of single crystal with nano-holes

Numerical Determination on Effective Elastic Moduli of 3-D Solid with A Large Number of Microcracks Using Fm-Dbem

Boundary Element Method for 2d Solids with Fluid-Filled Pores

2D Simulation of Composite Materials Using BEM

Closed-Form Interacting Solutions for Overall Elastic Moduli of Composite Materials with Multi-Phase Inclusions, Holes and Microcracks

Numerical Simulation of Failure Process in Heterogeneous Elastoplastic Materials

Numerical Simulation For The Problem Of Infinite Elastic Foundation

Improved hole and tube elements in BEM for elasticity problems

BEM for Simulation of 2D Elastic Body with Randomly Distributed Identical Circular Inclusions