Stepwise implantation of pedicle of upper-middle thoracic vertehral arch screws under guidance of C-shaped X-ray fluoroscopy:an experimental study

XU Weixing,CHEN Qixin,LI Fangcai

2007-01-01

Abstract:Objective To explore a simple, practical and safe way of implanting pedicle of upper-middle thoracic vertehral arch screws under X-ray guidance. Methods First, 6 normal adult thoracic spine samples(T1～T8) were selected, from which single spine units were separated. A surgical probe went in along the pedicle axis. The C-shaped arm X-ray recorded the four probe positions: at the entering point, the front end of the probe in the middle of the pedicle, at the pack of the spine, and under the cortex of the front of the spine. The position of the front end of the probe at the entering point, and the front end of the probe at different depth at central-side perspective position were analyzed. The related positions and their corresponding changes were also analyzed. Second, based on the changes mentioned above, different steps were adopted under the guidance of the C-shaped arm X-ray, to safely implant upper-middle thoracic pedicle screws. First, 6 T1～T8 spine samples were used, and under the guidance of the C-shaped arm device, 96 pedicle screws were implanted. After the operation, the spine samples were scanned through CT, and the positions of the screws were determined. According to the result of the CT scanning, the safety and accuracy of the implantation were evaluated as excellent (the screw was safely inside the pedicle); good (the screw penetrated a little of the inside or outside bone cortex, within 2mm.) and failure (the screw penetrated a lot, more than 2mm) . Results Ninety screws (93.8%) were evaluated as excellent, 6 (6.2%) were good and there was no failure. Conclusion The implantation of upper-middle thoracic pedicle screw under the guidance of the C-shaped arm X-ray fluoroscopy is a simple and feasible method characterized by its safety, accuracy and practicability.