Abstract:Solution-processed polymeric semiconductor films are attracting wide interest for applications in flexible electronics, wherein environmental stability is still a big obstacle. In many polymeric thin-film electronic devices, vertical phase separation has been observed, which leads to film depth dependences of electronic properties. Here, a soft plasma-assisted surface etching method to improve the environmental stability and maintain the electronic properties of organic field-effect transistors (OFETs) is proposed, by which the unwanted thin-film surface (exposed to air) is selectively taken away upon soft plasma etching, and the layer beneath the surface (subsurface) is preserved without any damage to the subsurface's structure or electronic function. Investigation of frequently used polymeric semiconductors poly(3-hexylthiophene) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4b′]dithiophen-2-yl)-alt [1,2,5]thiadiazolo[3,4-c]pyridine] shows that the crystallinity of the surface layer is higher than that of the subsurface layer. However, for p-type polymeric semiconductors, higher crystallinity usually leads to a lower ionization energy and higher doping concentration during exposure to air and thus a higher background conductivity, deteriorating the switching-off capability of the organic field-effect transistors (OFETs). Therefore, by removing this surface layer, the lifetime of OFETs in air is effectively increased by over 50%.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.1c00628?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.1c00628</a>.Transfer curves ((−ID)1/2–VG) for unetched and etched P3HT transistors; output curves of unetched and etched P3HT transistors; on/off ratio and field-effect mobility of unetched and etched P3HT transistors; transfer curves of PCDTPT transistors measured in different conditions; transfer curves ((−ID)1/2–VG) for unetched and etched PCDTPT transistors; VON, field-effect mobility and SS–1 of unetched and etched PCDTPT transistors; output curves of unetched and etched PCDTPT transistors; schematic diagram and transfer curve PCDTPT transistor (etched before the deposition of electrodes); dual sweep transfer and output curves of P3HT and PCDTPT transistors; the effect of thickness on PCDTPT transistors performance; the effect of encapsulation on PCDTPT transistors performance; and the effect of crystallinity on DPP-DTT transistors performance (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.1c00628/suppl_file/cm1c00628_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced Mobility of Poly(3-hexylthiophene) Transistors by Spin-Coating from High-Boiling-Point Solvents

Synergistic Effects of Solvent Vapor Assisted Spin-coating and Thermal Annealing on Enhancing the Carrier Mobility of Poly(3-hexylthiophene) Field-effect Transistors

Solvent Effects And Multiple Aggregate States In High-Mobility Organic Field-Effect Transistors Based On Poly(Bithiophene-Alt-Thienothiophene)

Tunability of Mobility and Conductivity over Large Ranges in Poly(3,3'''-Didodecylquaterthiophene)/insulating Polymer Composites.

Fabrication of Poly(3-Hexylthiophene) Nanowires for High-Mobility Transistors

Influence of thin-film processing on the performance of organic field-effect transistors

New strategy for enhancing performance of P3HT-based organic field-effect transistor via regulating the precipitated speed of solute in volatile solvents

Solvent and Temperature-Dependent Conductive Behavior of Poly(3-Hexylthiophene)

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

Different solvents effect on the performance of the solar cells based on poly(3-hexylthiophene):methanofullerenes

Excellent Carrier Mobility of 0.24 Cm2/vs in Regioregular Poly(3-Hexylthiophene) Based Field-Effect Transistor by Employing Octadecyltrimethoxysilane Treated Gate Insulator

Controlling Aggregation and Crystallization of Solution Processed Diketopyrrolopyrrole Based Polymer for High Performance Thin Film Transistors by Introducing Solvent Additive

Solvent vapor assisted spin-coating: A simple method to directly achieve high mobility from P3HT based thin film transistors

Influence of Solvent-Dependent Morphology on Molecular Doping and Charge Transport in Conductive Thiophene Polymer

Solvent-dependent Electrical Properties Improvement of Organic Field-Effect Transistor Based on Disordered Conjugated Polymer/insulator Blends

Solvent Additive-Assisted Anisotropic Assembly and Enhanced Charge Transport of π-Conjugated Polymer Thin Films

Surface Etching of Polymeric Semiconductor Films Improves Environmental Stability of Transistors

Controlling Aggregation and Crystallization of Solution Processed Diketopyrrolopyrrole Based Polymer for High Performance Thin Film Transistors by Pre-Metered Slot Die Coating Process

Well-defined, High Molecular Weight Poly(3-Alkylthiophene)s in Thin-Film Transistors: Side Chain Invariance in Field-Effect Mobility

Blending Crystalline/liquid Crystalline Small Molecule Semiconductors: A Strategy Towards High Performance Organic Thin Film Transistors

Air-stability Analysis and Improvement of Poly(3-Hexylthiophene) Field-Effect Transistors