Abstract:Advances in solid electrolytes (SEs) with superionic conductivity and stabilized electrode-electrolyte interfaces are key enablers for all solid-state batteries (SSBs) to meet the energy density and cost targets for next generation batteries for electric vehicles. Compared to their ceramic counterparts, sulfide- and thiophosphate-based electrolytes offer several key advantages, including (i) exceptionally high ionic conductivities up to 10 -2 S/cm (comparable to non-aqueous liquid electrolytes) as reported for Li 10 GeP 2 S 12 and Li 9.54 Si 1.74 P 1.44 S 11.7 Cl 0.3 , (ii) availability of low temperature and inexpensive synthesis routes to produce glass, glass-ceramic, and crystalline structures, and (iii) soft mechanical properties, which facilitates material processing. Among the drawbacks, sulfides have a narrow electrochemical window, hence limited electrochemical stability against Li-metal and cathodes and poor chemical stability including high sensitivity to moisture. Despite an intrinsic narrow thermodynamic range, most SEs rely on kinetic stability based on slow growth of the interfacial layer that has reasonable ionic conductivity and very low electronic conductivity. In addition to the thermodynamical instability, significant mechanical stresses develop in SE due to (i) volume changes of the electrode material during repeated lithiation (delithiation) and (ii) interface roughening from side reactions upon extended cycling. This effect often termed as “chemo-mechanical effect” results in poor interfacial contact between the SE and cathode. The talk will highlight a few material based approaches towards addressing the interfacial stabilities (as mentioned above) between Li 3 PS 4 SE and lithium-ion cathodes such as NMC. The area specific resistance (ASR) between SE-Cathode interfaces were optimized by coating cathode particles, varying stack pressure and doping the SE compositions. Acknowledgment - This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and is supported by Asst. Secretary, Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (VTO) through the Advanced Battery Materials Research (BMR) Program

Perspective Study of Secondary Batteries Development--the 56th Annual Meeting of the International Society of Electrochemistry

Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

Research Progress in Cathode and Anode Materials of Li-ion Battery

Fundamentals of Electrolytes for Solid-State Batteries: Challenges and Perspectives

Progress in Research of Positive Materials of Lithium Ion Secondary Batteries and Hydrothermal Synthesis of LiCoO2

Design of Composite Cathodes for Sulfide-Based All-Solid-state Batteries

REVIEW OF POLYMER SOLID ELECTROLYTE FOR LITHIUM-ION SECONDARY BATTERY

Progress of Electrode Materials for High Energy Lithium Secondary Batteries

Research Progress on Key Materials and Technologies for Secondary Batteries

Recent Progress in the Key Materials for Li-S Polymer Secondary Batteries

A Decade of Progress on Solid‐State Electrolytes for Secondary Batteries: Advances and Contributions

Perspective on powder technology for all-solid-state batteries: How to pair sulfide electrolyte with high-voltage cathode

Research on Anode Materials for Li-Ion Batteries

Advances on Nickel-Based Electrode Materials for Secondary Battery Systems: A Review

A Perspective on Sustainable Energy Materials for Lithium Batteries

Recognition and Application of Catalysis in Secondary Rechargeable Batteries

Progress and Perspective of Solid-State Lithium-Sulfur Batteries

An Overview and Future Perspectives of Aluminum Batteries

The Pathway Toward Practical Application of Lithium-Metal Anodes for Non-Aqueous Secondary Batteries.

Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect

(Invited) Investigations on Sulfide Solid-Electrolyte Cathode Interfaces