Wireless Remote Car Alarm Based on GPRS

苑文举,赵孔新,刘丽伟,钱锋

DOI: https://doi.org/10.3969/j.issn.1674-1374-b.2008.04.007

2008-01-01

Abstract:A wireless remote car alarm with high performance SOC singlechip C8051F020 as control kernel,combined with GPRS communication technology,is introduced in the paper.Both the principle and software of the system are discussed.

What problem does this paper attempt to address?

Design of On-Board Remote Alarm System Based on GSM Network

MENG Na,WANG Shuai,CHEN Wen-qiang,PAN Zhi-jie,ZHAO Fu-quan

DOI: https://doi.org/10.13273/j.cnki.qcdq.2011.12.003

2011-01-01

Abstract:The on-board remote alarm system is designed based on the GSM technology.With a MCU as its control core,this system uses the alarm signal of a sensor to make the GSM module send messages to the appointed number at the same time when it alarms.It can control the other body units through CAN bus,thus effectively improving the anti-theft performance of automobile.
Design of Remote Monitoring Security System Based on GPRS

Zhang Dong,Li Zhi,Xu Wei,Ma Yisen

DOI: https://doi.org/10.3969/j.issn.1672-9722.2011.05.027

2011-01-01

Abstract:This paper introduces a design of embedded system with infrared alarm and temperature alarm based on GPRS.The system kept microcontroller ARM2410,infrared sensor,camera,temperature sensor,GPRS modules together,realized the function of auto-detecting-mergence,intelligent judgment,alarming through SMS and so on.Comparing with traditional security system,the design had the advantages at simple structure,fast response and low cost,and it fit for modern society demand.
Multifunction GPS/GPRS Automobile Security System

xiu feng wang,gang cui

DOI: https://doi.org/10.4028/www.scientific.net/AMR.433-440.629

2012-01-01

Abstract:Based on ARM,multifuncttion GPS/GPRS automobile security system was designed,which focused on security and detectiong. The system combines with detection technology, sensor technology, GPS technology, GPRS technology and digital filtering technology. This system was discussed from software and hardware. Related math model was established. Corresponding test was been brought forward to improve system reliability. Average filtering method and median filtering algorithm have been used to inhibiting interference signals with variety of frequency in software. In this paper,the advantages of this system have been discussed. The embeded system realizes the function with characteristics of low cost, high performance, real-time and reliability,it has high practical value.
Gps Real Time Vehicle Alarm Monitoring System Base On Gprs/Csd Using The Embedded System

Xing Jianping,Zhang Jun,Cheng Hebin,Li Changqing,Shi Xiaohui

DOI: https://doi.org/10.1109/ITST.2006.288811

2006-01-01

Abstract:It proposed a method of combining the two types of data service CSD and GPRS based on GSM applied to GPS vehicle real-time monitoring and alarming system. Based on this method, Basic constitution and network structure of the system is given out, and then it implements the CSD and GPRS hardware interface and software flow based on the GR47 wireless communication module. Arm Embedded System was used as the central processing unit (CPU) and uLinux was used as the appropriate operation system (OS) to the circuit design. Compared with the conventional single mode of GPRS, this method makes up the disadvantage of the high time delay and the incertitude of the time delay in data transmission. In this case, the real-time data transfer of the system gets guarantee, and the daily maintenance expense of the system is reduced. GIS is applied to track and alarm the hardware clients on the electronic map. The test indicates that this method is appropriately used in the instantaneous information real-time transmission, and has high practicability and validity.
Design of the car of wireless video surveillance based on Android platform

Zhang Chuanzhen,Zhang Li,Jiang Jianjun

DOI: https://doi.org/10.3969/j.issn.1002-7300.2013.10.006

2013-01-01

Abstract:Wireless remote-control car is a new generation of the car proposed in 20 century,and it has broad application prospects in the hazardous and hostile environment,such as military reconnaissance,counter-terrorism,explosion-proof,anti-nuclear,pollution and other fields.In this paper,based on the hardware platform of Android phones and 51SCM,the development process and framework of the TCP transport protocol which is the most commonly used communication protocol in computer network are adopted,and through a wireless router to access the video stream and to drive the car,Android phones wirelessly access the car's camera to video surveillance and manipulate the movement of the car are achieved.After testing,the wireless remote-control car can smoothly watch the video collected by the car's camera and control the car without error within a range of 150 meters.
An on-vehicle wireless remote alarm platform based on image processing

Chang Qian,Yang Zehong,Song Yixu

DOI: https://doi.org/10.1109/WICOM.2009.5303862

2009-01-01

Abstract:In this paper we proposed a new wireless remote alarm system for vehicles security. Our solution is a new embedded platform, using mobile computation and wireless communication technologies to detect car theft incident and send image and text warnings to its remote owner by MMS/SMS. For using the new technologies, our new platform provides richer information and outperforms traditional car burglar alarms. And with the fast development of 3G network, our solution can be extended easily for more value-added services and benefit mobile communication service providers and users a lot. ©2009 IEEE.
Research of Communication System for Wireless Print-Terminal Based on GPRS Network

JIANG Jian-jun,ZHANG Gang,XIANG Shi-wu

DOI: https://doi.org/10.3969/j.issn.1003-1251.2006.03.014

2006-01-01

Abstract:The hardware connection and GPRS module setting between the GRPS network and the wireless print terminal are introduced.The real-time data communication flow,the design of the communication protocol and the implementation for each software layers are analysed.Finally,the way for TCP/IP on Rabbit(3 000) is given.The design purpose of mobile payment with taking the invoice instantly are reached,and the excellent economic benefit and social effect are obtained.
Guard Robot Alarm System Design Based on GPRS

Sun Lining,Li Maohai,Chen Tao

DOI: https://doi.org/10.4028/www.scientific.net/amm.43.217

2010-01-01

Applied Mechanics and Materials

Abstract:This paper designs guard robot alarm system using GPRS technology. An interesting communications infrastructure for remotely accessing is offered based on GPRS, which can control and interact with robots in an integrated and highly portable manner. In recent years the GPRS network provides wireless access of internet for mobile phone which becomes the most important and common terminal equipment. Therefore, the alarm information is designed to send to the user’s mobile phone through GPRS networks, and man-made intervention is added to the system, thus a more reliable and convenient alarm system is implemented. The system mainly consists of two parts: detection of abnormal and dangerous situation in domestic environment and sending the alarm information as MMS form to the user’s phone via GPRS networks.
Design and Implementation of CAN/GPRS Wireless Vehicle Gateway

游张华,许勇

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.26.098

2008-01-01

Abstract:Recently,attentions are focused more on vehicle interior network application and the wireless vehicle-carry data transmission technology. For developing a remote monitoring system,three aspects of the system are discussed:the vehicle interior network configuration,the CAN/GPRS gateway realization and the remote monitoring server design. Described in the paper are hardware design,programming of low level drivers,the network application layer protocol design,the ARM-Linux transplant and the protocol conversion. Contents included also GPRS wireless networking and socket communication.
Design and Application of Vehicle Terminal for Long-Range Vehicle Position System

李芝霞,史忠科

DOI: https://doi.org/10.3969/j.issn.1000-8829.2008.11.019

2008-01-01

Abstract:A vehicle terminal system is designed,the system can acquire the moving vehicle information providing by GPS module using LPC2138,and transmits the data to the Internet by wireless communication link built by GPRS module.Then the monitor center receives the real-time data packet by server linking Internet,the system can realize the vehicle positoning and monitoring.The vehicle system working principle,hardware construction and software design are introduced.At last,vehicle motion test proves the feasibility of this design.
GPRS Based Guard Robot Alarm System Design

Maohai Li,Lining Sun,Qingcheng Huang,Zesu Cai,Songhao Piao

DOI: https://doi.org/10.1109/ICICSE.2009.55

2010-01-01

Abstract:This paper presents a practical approach to design guard robot alarm system using GPRS technology. GPRS offers an interesting communications infrastructure for remotely accessing, controlling and interacting with robots in an integrated and highly portable manner, particularly in recent years the GPRS network provides wireless access of internet for mobile phone which becomes the most important and common terminal equipment. Therefore, in this paper the alarm information is designed to send to the user's mobile phone, and add man-made intervention to the system, thus achieves a more convenient and reliable alarm system. The system mainly consists of two parts: detection of abnormal and dangerous situation in domestic environment and sending the alarm information as MMS form to the user's phone via GPRS networks. Finally experiments show that the alarm system can accurately send alarm information to the user's mobile phone. The system is low-cost, flexible, reliable, and can be widely used.
Design of Cable Anti-theft Alarm System Based on Wireless Network

WANG Xin-ping,DANG Jian-jun,LI Shi

DOI: https://doi.org/10.3969/j.issn.1001-2257.2011.10.012

2011-01-01

Abstract:According to the serious situation that cable is often stolen,a cable anti-theft alarm system is designed based on wireless network.The high-pass filter parameter is calculated and simulated.The monitoring circuit and software and hardware of control system is completed.The system can monitor cable line situation in the management area.When the cable is turning off,the system will promptly send cable-stolen message to the monitoring center,and at the same time,the information in the form of short message is sent to manager's phone through GSM(global system for mobile communications).
Study on wireless remote monitoring system based on GPRS

Musheng Yang,Yu Zhang,Rong Chen

DOI: https://doi.org/10.1109/WiCom.2008.1190

2008-01-01

Abstract:Along with continuous development and promotion of WEB and GPRS, application of GPRS gradually becomes a research focus in the supervisory control field. This article, which uses wireless network advantage of GPRS telecommunication, combining with the traditional industry control system, offers a wireless remote control system based on GPRS. The system has been proved to have advantages over the traditional industry control system. © 2008 IEEE.
Remote Monitoring System Based on ARM and GPRS Network

JI Wei-ping,LUO Fei,CAO Jian-zhong,CHENG Xin-hui

DOI: https://doi.org/10.3969/j.issn.1001-3695.2006.06.065

2006-01-01

Abstract:This paper mainly introduces a system based on embedded CPU and GPRS network,which accomplishes the transmission and supervisor of remote data.The core of this system includes the transition of protocol from Ethernet to GPRS,the disposal of data image and the communication via GPRS.It has the advantages of always on-line,logging on promptly,charging by quantity,switching freely and so on.Therefore,it ensures the stability and greatly reduces the investment and running expenditure.
Design of an Intelligent Alarm System Based on 80C51

LI Hao-ran,CHEN Xiao-yu,LIU Yu-ling,WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.05.060

2012-01-01

Abstract:The safety of househood is the key part of personal and property safety.As the increased case of housebreaking and robbery,the demand of a cheap,simple house alarm system with small disturbance is rising day by day.It introduces an alarm system based on the 80C51 microcontroller,describing its composition and software/hardware design.This system integrates situation identification,voice warning,on-site and remote alarming with relatively low cost,guaranteeing a friendly man-machine-environment by providing both guests and the house owner with necessary instructions.It supports operations including system activation/deactivation,time setting,password setting,alarming phone numbers setting,alarming time and phone number recording and checking.When activated,it would simultaneously ring the alarm and dial the stored numbers to inform the owner or the police of the potential housebreaking.The system designed here will be base of the practicle alarm system in the future.
Design of Wireless Communication System Based on nRF905

Zhou Chao,Wang Chen

2009-01-01

Abstract:This paper introduces a wireless communication module based on Atmega128L of Atmel and single-chip RF transceiver chip nRF905 of Nordic,and introduces the system working principle,hardware design and software design,and gives out the main procedures. This system has Advantages of low cost,easy expansion,easy operation,etc.,can be widely used in remote control,wireless data collection and other fields.
Design of Home Intelligent Alarm and Control System Based on GSM Short Message

ZHONG Yufang,LV Anping,WU Mingguang

DOI: https://doi.org/10.3969/j.issn.1001-5531.2008.06.005

2008-01-01

Abstract:Based on GSM short message,an intelligent alarm and remote control system which made the high performance microcontroller ATmega64 as the core was presented.From several aspects,such as system structure,working principle,hardware and software design,the intelligent alarm and remote control system was narrated.The system could be connected to the various wired or wireless sensors to achieve the home security alarm and remote control by the short message.
Multifunctional wireless monitored alarming system based on SoPC

He Wei,Qin Jiangyun,Zhang Ling,Liu Pingjing,Li Feng,Zhao Hai

DOI: https://doi.org/10.3969/j.issn.0258-7998.2011.02.013

2011-01-01

Abstract:With the technology of SoPC and GPRS,designed a multifunctional wireless monitored alarming system whose core is FPGA.The system has multiple working modes,users may monitor the site any time or use intelligent or manual way to alarm.
Remote Wireless Alarm System Based on Medical Panel Computer

TIAN Zhi-hong,GUO Qing-feng,YANG Wen-jie,ZHANG Jian-guo

DOI: https://doi.org/10.3969/j.issn.1672-6510.2010.05.013

2010-01-01

Abstract:According to the advantages of medical panel computer,GPRS module and modular design method,remote wireless alarm system was designed,which is fit for people with disabilities and the elderly.Panel computer can communicate with GPRS module by serial port and achieve alarm through sending messages and ringing phones.With the AT commands,application programs encode the information about patients,and send them to the GPRS module,which can transmit this information wirelessly and achieve the alarm of system.
Design of automobile anti-theft alarm system based on GSM+CAN platform

Liu Xiao-bin

Abstract:This paper introduces a new car alarm system. The system is based STM32F103 controller, system data collected by the vibration sensor system and human sensors. It combines embedded technology, automotive CAN technology and GSM network technologies. The system can be combined with vehicle CAN bus perfectly and takes full advantage of the car bodies to achieve security features, making the car to achieve a vehicle anti-theft, real-time, and low prices, with a wide range of practical value.

Computer Science,Engineering

Wireless Remote Car Alarm Based on GPRS

Design of On-Board Remote Alarm System Based on GSM Network

Design of Remote Monitoring Security System Based on GPRS

Multifunction GPS/GPRS Automobile Security System

Gps Real Time Vehicle Alarm Monitoring System Base On Gprs/Csd Using The Embedded System

Design of the car of wireless video surveillance based on Android platform

An on-vehicle wireless remote alarm platform based on image processing

Research of Communication System for Wireless Print-Terminal Based on GPRS Network

Guard Robot Alarm System Design Based on GPRS

Design and Implementation of CAN/GPRS Wireless Vehicle Gateway

Design and Application of Vehicle Terminal for Long-Range Vehicle Position System

GPRS Based Guard Robot Alarm System Design

Design of Cable Anti-theft Alarm System Based on Wireless Network

Study on wireless remote monitoring system based on GPRS

Remote Monitoring System Based on ARM and GPRS Network

Design of an Intelligent Alarm System Based on 80C51

Design of Wireless Communication System Based on nRF905

Design of Home Intelligent Alarm and Control System Based on GSM Short Message

Multifunctional wireless monitored alarming system based on SoPC

Remote Wireless Alarm System Based on Medical Panel Computer

Design of automobile anti-theft alarm system based on GSM+CAN platform