Multifunctional wireless monitored alarming system based on SoPC

He Wei,Qin Jiangyun,Zhang Ling,Liu Pingjing,Li Feng,Zhao Hai

DOI: https://doi.org/10.3969/j.issn.0258-7998.2011.02.013

2011-01-01

Abstract:With the technology of SoPC and GPRS,designed a multifunctional wireless monitored alarming system whose core is FPGA.The system has multiple working modes,users may monitor the site any time or use intelligent or manual way to alarm.

What problem does this paper attempt to address?

Remote Monitoring and Alarm System based on ARM9

HAN Dong-xu,QIN Wen-hua,ZHAO Jian-ping,LI Xiao-li,ZHOU Zi-li

DOI: https://doi.org/10.3969/j.issn.1002-0802.2013.10.021

2013-01-01

Abstract:The remote monitoring and alarm system based on ARM9 forsending alarm images in real time is proposed and designed.With Linux as software platform and mini2440 board as hardware platform,this system acquires photos by cameras,and monitors the screen with LCD real-time display.If any change of the monitoring area is found within the set time,the alarm image would be sent through GSM communication module.The existing monitoring system is relatively complex and only suitable for large-scale applications,the proposed system is more applicable to small occasions.The user may pick up the alarm image with mobile phone,thus saving the cost and extending the application scope.
Remote Surveillance Industrial Terminal Based on Wireless Communication Techniques

Gu Yaning,Su Hongye,Dong Lida,Shen Lihui

DOI: https://doi.org/10.3321/j.issn:1671-4598.2007.03.004

2007-01-01

Abstract:This paper focuses on the development of a wireless surveillance industrial terminal,based on GPRS/CDMA communication channels,which can collect images and data of industrial processes remotely through network. In addition,using embedded real-time operating system Linux,the surveillance terminal can do management such as collecting,coding,storage,query and uploading with high reliability and feasibility.The successful application results of circumstance protection field show that the surveillance terminal is stable and reliable.
Design of Greenhouse Remote Monitoring System Base on GPRS

JIANG Hui,HU Feng,CHEN Ming,JIN Yu,LIU Dan-jie,DONG Ke-dong,YAO Qing

DOI: https://doi.org/10.3969/j.issn.1673-3851.2011.06.017

2011-01-01

Abstract:A remote monitoring system of greenhouse based on GPRS is designed.The low computer of this system is composed of the temperature sensor,humidity sensor,GPRS module and singlechip STC89C52 and so on.The upper computer is a PC connected to internet web.Firstly,the sensors gather temperature and humidity data.After being a series of disposed,the data is sent to the GPRS network via SIM300 module.And then,the soft of the upper computer detect the corresponding network port constantly.And the information of the port is received,processed and analysised.When the temperture or the humidity is abnormal,the alarming is given so as to achieve the purpose of unmanned monitoring in greenhouse.The result shows that this system is steady and it complies with the design requirements.
Prison centralized alarming system based on wireless sensor networks and multi-level video surveillance

Hua Wang,Gangfeng Yan

DOI: https://doi.org/10.1007/978-3-642-25778-0-95

2012-01-01

Abstract:Prison centralized alarming system (PCAS) is a very important part of prison digital monitoring system (PDMS). How to collect all those alarm information generated from the alarm objects within the scope of prison and submit to PDMS is the key problem to be solved urgently. Wireless sensor networks (WSNs) can incorporate miscellaneous prison alarm information and send the fused data to PCAS with the aid of flexible deployment, while it is not that convenient for wire transmission mode to finish the tough job. Combined with multi-level video surveillance, PCAS can not only demonstrate prison alarm information real time but also improve the efficiency and security of prison management greatly. © 2012 Springer-Verlag Berlin Heidelberg.
The Research of a Terminal of Wireless Monitor System of Distributed Equipments Based on GPRS

Wenlei ZHANG,Shixi YANG,Chaosheng HUANG

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.04.028

2009-01-01

Abstract:A terminal of remote monitoring system was developed.The constitutes of the hardware system and transplant of embedded operation system and the function and working process of the software module were researched.And the data acquisition and wireless transaction which are based on the combination of embedded system and GPRS were implemented.
Research and Development of Comprehensive Monitoring and Management Platform for Substation

Hua Wang,Gangfeng Yan

DOI: https://doi.org/10.1109/wcica.2012.6359132

2012-01-01

Intelligent Control and Automation

Abstract:Substation is an important part of power system and its operation status exerts great effect on the safety of power system. Comprehensive monitoring management platform for substation (CMMP) is a digital monitoring platform which has uniform interfaces; flexible expansibility and hierarchical network control ability, and it is custom-designed for safe operation of substation. CMMP consists of direct current real-time monitoring subsystem, intrusion detection and hierarchical video monitoring subsystem, temperature and humidity and fire monitoring subsystem based on WSNs. CMMP adopt composite structure of C/S and B/S which would be convenient for computer and other mobile end to query monitoring information. Owing to the perfect private network of power system, CMMP can monitor both local and cross-domain substations. In addition, CMMP can classify and manage all kinds of alarm information from substation and realize distribution monitoring centralized management.
Design of Regional Water Monitoring and Measuring Instrument Based on Embedded System

Guangzhou Zhao

2006-01-01

Abstract:In order to improve the promptness and intelligence of water monitoring and measuring,a system-embedded(instrument) based on ARM and μC/OS-Ⅱ was introducesd.With the GPRS network technology,the apparatus can bidirectionally communicate with upper-layer controller in real time.The automatically monitoring and measuring ability as well as the quick reaction to water accidents were proved by practical application.
Design and Realization of Substation-Control Center Two Level Distributed Alarming System

Wei Jin Zhuang,Hai Bing Zhu,Jia Qing Zhao,Yong Gang Zhang,Ming Yang Sun

DOI: https://doi.org/10.4028/www.scientific.net/amr.933.789

2014-01-01

Advanced Materials Research

Abstract:This paper proposes the construction mode of a two-level distributed alarming system, in which alarms are coordinately processed by substations and control center. In substation side, we classify alarms into several grades according to the degree of their importance and send the extracted key alarms to control center, thus reduce the amount of alarm passing and ensure the transmission reliability and speed; meanwhile, we carry out alarm verification and pretreatment through information redundancy to validate alarm correctness. In control center side, we integrate the data of ordinary Supervisory Control and Data Acquisition (SCADA) and the alarms received directly from substations, and carry out comprehensive fault reasoning and correctness verification. In order to illustrate the feasibility of the substation-control center distributed alarming system, the overall structure, substation smart alarm (SSA), control center smart alarm (CCSA) and cooked data transmission of this construction mode will be discussed in detail.
Design Of Alarm And Data-Monitoring Instrument Using Field Programmable System Level Integrated Circuits

C Ma,Jp Xiong,Tj Lu,Hb Jia,Cn Na

2002-01-01

Abstract:Based on a single chip; of FPSLIC (Field Programmable System Level Integrated Circuits), the main control system of an alarm and data-monitoring instrument is developed. When abnormal condition occurs, the system automatically dials the predetermined phone number, convert alarm information into analog audio signals and send them to the monitor phone through PSTN at a long distance. Also, CAN bus protocol is used to connect the system into a local network for data storage and analysis at a data recording center.
Gps Real Time Vehicle Alarm Monitoring System Base On Gprs/Csd Using The Embedded System

Xing Jianping,Zhang Jun,Cheng Hebin,Li Changqing,Shi Xiaohui

DOI: https://doi.org/10.1109/ITST.2006.288811

2006-01-01

Abstract:It proposed a method of combining the two types of data service CSD and GPRS based on GSM applied to GPS vehicle real-time monitoring and alarming system. Based on this method, Basic constitution and network structure of the system is given out, and then it implements the CSD and GPRS hardware interface and software flow based on the GR47 wireless communication module. Arm Embedded System was used as the central processing unit (CPU) and uLinux was used as the appropriate operation system (OS) to the circuit design. Compared with the conventional single mode of GPRS, this method makes up the disadvantage of the high time delay and the incertitude of the time delay in data transmission. In this case, the real-time data transfer of the system gets guarantee, and the daily maintenance expense of the system is reduced. GIS is applied to track and alarm the hardware clients on the electronic map. The test indicates that this method is appropriately used in the instantaneous information real-time transmission, and has high practicability and validity.
The system software design of the embedded remote video monitor system based on GPRS

Zhen FU,Wen-Jun YAN

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.11.020

2006-01-01

Abstract:The general structure of the embedded remote video monitor system based on GPRS was introduced.The system applied the embedded technic to the design of remote monitor console and the "socket" to transferring the video(datum) on GPRS.The way of using VC++ and EVC to make the system software design on the built hardware platform was also(explored) in detail to extremely achieve the technology of remote video monitor.
Design And Implementation Of Power Electronic Wireless Monitoring System Based On Zigbee Technology

Yicheng Wang,Wenxi Yao

2014-01-01

Abstract:Aimed at overcoming the existing defects of the large volume of wiring work, high cost and poor safety etc. in power electronic monitoring based on wired communication modes, a wireless monitoring system based on ZigBee technology is proposed with the characteristics of low power consumption, low cost, short time delay and high reliability. This system employs microprocessor DSP and ZigBee module SZ05 to realize wireless communication, and the structure of the communication network and the design process of hardware and software are introduced in this paper combined with an engineering project. This wireless monitoring system is proved to be of good stability by practice and meets the requirement of power electronic monitoring.
Design of an Intelligent Alarm System Based on 80C51

LI Hao-ran,CHEN Xiao-yu,LIU Yu-ling,WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.05.060

2012-01-01

Abstract:The safety of househood is the key part of personal and property safety.As the increased case of housebreaking and robbery,the demand of a cheap,simple house alarm system with small disturbance is rising day by day.It introduces an alarm system based on the 80C51 microcontroller,describing its composition and software/hardware design.This system integrates situation identification,voice warning,on-site and remote alarming with relatively low cost,guaranteeing a friendly man-machine-environment by providing both guests and the house owner with necessary instructions.It supports operations including system activation/deactivation,time setting,password setting,alarming phone numbers setting,alarming time and phone number recording and checking.When activated,it would simultaneously ring the alarm and dial the stored numbers to inform the owner or the police of the potential housebreaking.The system designed here will be base of the practicle alarm system in the future.
Alarm Information Management System Based on USB and Telephone Network

MA Fei,ZHANG Xing-gan

DOI: https://doi.org/10.3969/j.issn.1671-1815.2008.02.025

2008-01-01

Abstract:A kind of alarm information management system,which consists of SCM,USB,decoding chip of FSK and PC,is introduced.Using EZ-USB FX2 chip produced by CYPRESS as USB interface chip,the system deals with the alarm information which is tansfered through telephone network,then decoded by HT9032 and displaied in the PC.The system is provided with lines of communication malfunction detecting,alarming clients imformation display,map imformation display,alarm type display,alarm event processing condition recode.And fast and high-performance residence community safety supervision is privided.
Radioactive Source Monitoring System Based on RFID and GPRS

HE Hai-yang,ZHOU Hong-liang,ZHANG Hong-jian,ZHANG Sheng,ZHOU Jun-ru,WENG Guo-jie

DOI: https://doi.org/10.3969/j.issn.0258-0934.2011.11.009

2011-01-01

Abstract:Nuclear radiation produced by radioactive source is harmful to the health of human body,and the lost and theft of radioactive source will cause environmental pollution and social panic.In order to solve the abnormal leaks,accidental loss,theft and other problems of the radioactive source,a radioactive source monitoring system based on RFID,GPS,GPRS and GSM technology is put forward.Radiation dose detector and GPS wireless location module are used to obtain the information of radiation dose and location respectively,RFID reader reads the status of a tag fixed on the bottom of the radioactive source.All information is transmitted to the remote monitoring center via GPRS wireless transmission.There will be an audible and visual alarm when radiation dose is out of limits or the state of radioactive source is abnormal,and the monitoring center will send alarming text messages to the managers through GSM Modem at the same time.Thus,the functions of monitoring and alarming are achieved.The system has already been put into operation and is being kept in functional order.It can provide stable statistics as well as accurate alarm,improving the supervision of radioactive source effectively.
Design of Multi-functional Wireless Gateway Based on GPRS

YANG Jiang,WU Zhi-qiang,CHEN Qiong

DOI: https://doi.org/10.3969/j.issn.1671-7848.2010.05.020

2010-01-01

Abstract:To the shortcomings of gateway in transparent data transfer mode,a multi-functional wireless gateway based on GPRS is developed for the remote maintencace of flow meters.A multi-functional mode is added to improve the system performance,in which the gateway has the new functions such as the data pre-collection,the abnormal status detection for field instrumentations and the reporting to host actively.The hardware of gateway using LPC2368 microprocessor and MC55 GPRS module,and the software based onμC/OS-II are described in detail.Multi-functional wireless gateway can well reduce the operating costs,improve the rapid response and fault detecting ability of the remote maintenance system of flow meters based on GPRS in the laboratory environment.
Remote monitoring system for agricultural information based on wireless sensor network

Zenglin Zhang,Pute Wu,Wenting Han,Xiaoqing Yu

DOI: https://doi.org/10.1080/02533839.2016.1273140

2017-01-02

Journal of the Chinese Institute of Engineers

Abstract:To achieve a widely dispersed, diverse network, reflecting natural complexity for agricultural information gathering, an agricultural information remote monitoring system has been developed based on a combination of the ZigBee and the GPRS networks. Data collection of agricultural information was completed using a CC2430 radio frequency chip. Our base station was designed and developed based on ARM9 processors and an embedded Linux operating system, which received, stored, and displayed the agricultural information, and communicated with the remote monitoring center by GPRS. Test results have a data sampling interval set for 40 min. The system ran reliably while collecting data accurately. It met the system design requirement and all practical demands. Finally, the system provided good prospects for use in agricultural information remote monitoring. This is a good example of using the Internet for farming.

engineering, multidisciplinary
Design of Multifunctional Automatic System for Hydrological Data Acquisition and Transmission

ZHU Qing,ZHANG Xing-gan,BAI Ye-chao

DOI: https://doi.org/10.3969/j.issn.1004-373x.2011.03.044

2011-01-01

Abstract:A multifunctional automatic system of hydrological data acquisition and transmission is designed and imple-mented to meet the current demand of hydrological data acquisition and transmission.This system based on PIC16F887 microprocessor and GSM module can receive multiple forms of sensor signals,store them in the high capability FLASH memory,and send the hydrological data and alarm information by GSM module.The LCDof the system displays multistage Chinese menu,which is easy to control and query.The testing results show that the system,whose power comsumption is low,size small and extensibility high,is easy to operate and reliable.It has great promotional value in the field of hydrological data collection and transmission.
Integrated Coal Mine Safety Monitoring System

Lijuan Mu,Yan Ji

DOI: https://doi.org/10.1007/978-3-642-29455-6_51

2012-01-01

Abstract:The integrated system is composed of various sensors, wireless RF module substations, main control module of GPRS module and the host computer in the management center.In each substation, various underground sensors for gas, wind speed, temperature etc. carry out real-time monitoring. When the data exceed the limited values, an alarm will occur. Compared with data transmission through conventional bus, application of wireless communication and GPRS network technologies reduces investment on underground layout, ensures timely, accurate and rapid transmission of data in all key underground mining zones and improves efficiency of the system.
Multi-function Monitoring and Alarm System for the Large Stadium

Xiaohui Wang,Xiaoning Dou

DOI: https://doi.org/10.21307/ijanmc-2018-007

2018-01-01

Abstract:Abstract In the recent years, the safety problem in the large stadium has concerned by the researchers. Especially during the period of the large sport, the safety problem of the stadium has become an important public event. This paper designs a multi-function monitoring and alarm system based on the mobile communication network. It could realize the smoke or combustible gas alarm, the infrared identification detection and the temperature alarm. It collects the data through the sensor and sends the data to the mobile phone or the control platform. The system has the characteristics of simple, convenient, safety, various functions and low cost.

Multifunctional wireless monitored alarming system based on SoPC

Remote Monitoring and Alarm System based on ARM9

Remote Surveillance Industrial Terminal Based on Wireless Communication Techniques

Design of Greenhouse Remote Monitoring System Base on GPRS

Prison centralized alarming system based on wireless sensor networks and multi-level video surveillance

The Research of a Terminal of Wireless Monitor System of Distributed Equipments Based on GPRS

Research and Development of Comprehensive Monitoring and Management Platform for Substation

Design of Regional Water Monitoring and Measuring Instrument Based on Embedded System

Design and Realization of Substation-Control Center Two Level Distributed Alarming System

Design Of Alarm And Data-Monitoring Instrument Using Field Programmable System Level Integrated Circuits

Gps Real Time Vehicle Alarm Monitoring System Base On Gprs/Csd Using The Embedded System

The system software design of the embedded remote video monitor system based on GPRS

Design And Implementation Of Power Electronic Wireless Monitoring System Based On Zigbee Technology

Design of an Intelligent Alarm System Based on 80C51

Alarm Information Management System Based on USB and Telephone Network

Radioactive Source Monitoring System Based on RFID and GPRS

Design of Multi-functional Wireless Gateway Based on GPRS

Remote monitoring system for agricultural information based on wireless sensor network

Design of Multifunctional Automatic System for Hydrological Data Acquisition and Transmission

Integrated Coal Mine Safety Monitoring System

Multi-function Monitoring and Alarm System for the Large Stadium