Abstract:Benefiting from the 193-nm lithography, we have used one of the MPW platforms to realize narrow tip of width 100 nm with great repeatability and uniformity. Based on the new patterning technique, we optimized the suspended spot size converter (SSC) accordingly and the design result showed coupling loss less than -1 dB given with proper matching oil. We fabricated the device together with other photonic circuits and maintained the tip width around 105 nm across the wafers. First, we tested various matching oils, which are commercial product used for optical package but with unknown refractive index at C band, with one of them the SSC realized the state-of-the-art coupling loss less than -1.3 dB/facet with cleaved singlemode fiber (SMF) for both TE and TM polarization state with a remarkable polarization-dependent loss less than 0.5 dB. Subsequently, we tried customized matching oils, which are not suitable for massive production but with known refractive index, to further confirm the effect of the refractive index of the matching oil. A similar trend with simulation result was verified. We also tested many chips randomly selected from different wafers to check the statistics and uniformity of the device, the measurement result showed variation within 0.4 dB across wafers, which is the best performance to the best of our knowledge realized in the available silicon photonics platforms worldwide. Finally, to test the feasibility of the design for package, we studied the alignment tolerance and conducted a simple packaging using ultraviolet (UV) curing to fix the fiber and the silicon chip. The 1-dB extra loss corresponded to 2-mu m misalignment in cross section, similar to the tolerance between two cleaved SMF and the variation after UV curing was just 0.5 dB attributed to the loose alignment tolerance.

Angled-Facet Spot-Size-Converter Integrated Semiconductor Optical Amplifiers Using Asymmetric Twin Waveguide Technology

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

1.55 Μm Spot-Size Converter Integrated Polarization-Insensitive Quantum-Well Semiconductor Optical Amplifier with Tensile-Strained Barriers

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Fabrication and Optical Optimization of Spot-Size Converters with Strong Cladding Layers

Efficient Spot Size Converter for Higher-Order Mode Fiber-Chip Coupling

Broadband High-Efficiency Triple-Tip Spot Size Converter for Edge Coupling with Improved Polarization Insensitivity

Three-Dimensional Tapered Spot-Size Converter Based on (111) Silicon-on-Insulator

Multi-Poly-Silicon-Layer-Based Spot-Size Converter for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber

High-efficiency spot size converter for photonic crystal fiber-to-waveguide using composite waveguide structures

Achromatic Silicon Photonic Waveguide Lenses for Ultra-Broadband Multimode Spot-Size Conversion

The optimization of rear facet reflectivity in all-optical wavelength converters based on a single-port coupled SOA

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

A Design of 3D Spot-size Converter Based on a Rib Waveguide Structure

Silicon-based On-Chip All-Optical Wavelength Conversion for Two-Dimensional Hybrid Multiplexing Signals

Spot-Size Converter Based on Long-Period Grating

Efficient Suspended Coupler with Loss Less Than −1.4 Db Between Si-Photonic Waveguide and Cleaved Single Mode Fiber

Efficient and Broadband Trident Spot-Size Convertor for Thin-Film Lithium Niobate Integrated Device

Y-Branch Spot-Size Converter for A Buried Silica Waveguide with Large Index Difference

Ultra-compact Optical 90° Hybrid Based on a Wedge-Shaped 2 × 4 MMI Coupler and a 2 × 2 MMI Coupler in Silicon-on-insulator.