Abstract:In this study, kinematic and kinetic data for 14 test subjects walking on a treadmill were recorded to verify a damped bipedal inverted pendulum (DBIP) model. The verification aim was for the DBIP model to match the step frequency and first harmonic dynamic load factor (DLF1) extracted from the measured data, as these are key parameters of interest in civil engineering applications. The verification was conducted in several phases. First, kinematic data from 39 markers attached to the human body were used to get the trajectory of body’s centre of mass (BCoM). This trajectory, in conjunction with the vertical and longitudinal ground reaction forces (GRFs) were then used to plot the leg force – leg length relationship. Linear curve fitting yielded the spring stiffness and spring length parameters. These parameters, together with the body mass and damping coefficient, were fed into the DBIP model to identify initial conditions for the motion of BCoM leading to the stable periodic gait. For the 14 test subjects, the model produced excellent agreement with the measured step frequency and DLF1, while relative error for the walking speed was between -12.6% and 2.0%. The simulated waveform of the vertical BCoM displacement was found to match the measured signal well. In addition, match between simulated and measured GRF profiles was satisfactory except for one test subject. Regression functions have been established for estimating model parameters, based on which step-by-step procedures have then been proposed for modelling a pedestrian within the population. The results suggest that the DBIP succeeds in modelling pedestrians walking on rigid level surfaces. In the next step the model should be considered for modelling pedestrians on vibrating civil engineering structures.

Analysis of Human Gait Using an Inverted Pendulum Model.

An inverted pendulum model based humanoid gait generation using convex optimization

Humanoid 3D Gait Generation Based on Inverted Pendulum Model.

Gait analysis of human locomotion based on motion capture system

Cylindrical Inverted Pendulum Model for Three Dimensional Bipedal Walking.

Understand Human Walking Through a 2D Inverted Pendulum Model.

A damped bipedal inverted pendulum for human-structure interaction analysis

Study on Walking Strategy of Biped Robot Based on Dynamics of Divergent Component of Motion

Gait Transition and Orbital Stability Analysis for a Biped Robot Based on the V-DSLIP Model with Torso and Swing Leg Dynamics

Variable Pivot Gait Based a Novel Dynamics Correction Method for Human Lower Limbs Model

Stability Analysis of a Pedestrian’s Walking Motion Based on the Inverted Pendulum Model

Forward dynamic human gait simulation using a SLIP target model

Humanoid Robot Gait Planning Based on 3D Linear Inverted Pendulum Model

Energy-Efficient Bipedal Walking: from Single-Mass Model to Three-Mass Model.

Verification of Damped Bipedal Inverted Pendulum Model Against Kinematic and Kinetic Data of Human Walking on Rigid-Level Ground

Investigation of 3D Bipedal Spring-Loaded Inverted Pendulum Human Walking Model on Laterally Vibrating Surfaces in the Case of Phase Drift, Phase Pulling, and Synchronization

Foot Placement Analysis of Human Walking Based on Capture Point of Linear Inverted Pendulum Model.

A Gait Control Strategy of Biped Robots Based on the 3-D Inverted Pendulum Model

Walking Control Method of Humanoid Robot Based on FSR Sensors and Inverted Pendulum Model.

Modeling and Simulation of Human Gait Dynamics

An Actuated Dissipative Spring-Mass Walking Model: Predicting Human-Like Ground Reaction Forces and the Effects of Model Parameters.