Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Prediction of Stiffener Buckling in Press Bend Forming of Integral Panels

Elastic and Elastic-Plastic Threshold Stiffness of Stiffened Steel Plate Walls in Compression

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

ELASTIC BUCKLING OF STIFFENED STEEL PLATE SHEAR WALL IN SHEAR

Elastic-plastic buckling analysis of stiffened panel subjected to global bending in forming process

Elastic buckling of steel shear walls vertically stiffened by channels under axial compression

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Analytical Method for Post-Buckling Behavior Prediction of Stiffened Panel Based on Effective Width Method

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Calculation of ultimate strength for slightly stiffened thick panels under biaxial compression

An Empirical Formula For Predicting Elastic Ultimate Buckling Strength Of Flat-Bar Stiffened Panels With Initial Imperfections

Dynamic Buckling Analysis of Stiffened Panels under In-Plane Uniaxial Impact Considering Plate/web Interaction

Analysis of Mechanics Condition for Integral Panel Skin with Rib During Bending Process

Design and optimization of composite sub-stiffened panels

Test and ultimate load capacity prediction of hat-stiffened composite panel under axial compression

Experiment and Analysis of Hat-Stringer-stiffened Composite Curved Panels under Axial Compression

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Finite element simulation of incremental forming for 2219 aluminium integrally stiffened panel

Analysis and experimental evaluation framework for buckling and post-buckling of composite stiffened panels

Modeling of Stiffener Integral Panels with Eigenstrain for Laser Peen Forming and Analysis of Deformation Characteristic