Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Towards Steady-State Operational Design for the Data and PF Control Systems of the HT-7U

Concept Design of Fusion Power Shutdown System for ITER

Design and Simulation of Extremum-Seeking Open-Loop Optimal Control of Current Profile in the DIII-D Tokamak

Recent Progress in Chinese Fusion Research Based on Superconducting Tokamak Configuration

Robust Control Design for the Poloidal Magnetic Flux Profile Evolution in the Presence of Model Uncertainties

Poloidal Magnetic Flux Profile Control in Tokamaks Via Normalized Coprime Factorization Robust Control

Robust control of the poloidal magnetic flux profile in the presence of unmodeled dynamics

Extremum-Seeking-Based Receding-Horizon Optimal Control of Plasma Current Profile in the DIII-D Tokamak

Closed-Loop Tracking Control Of Poloidal Magnetic Flux Profile In Tokamaks

Performance evaluation of the HT-7U data system

Data-Driven Modeling and Feedback Tracking Control of the Toroidal Rotation Profile for Advanced Tokamak Scenarios in Diii-D

Receding-horizon optimal control of the current profile evolution during the ramp-up phase of a tokamak discharge

Dynamic Optimization Of Tokamak Plasmas Via Control Parameterization And The Time-Scaling Transformation

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Long Pulse Enhanced Confinement Discharges in the HT-7 Superconducting Tokamak by Ion Bernstein Wave Heating and Lower Hybrid Wave Current Drive

Quasi-Steady-State Ac Plasma Current Operation in Ht-7 Tokamak

Improved Tokamak Concept Focusing On Easy Maintenance

Maintenance Oriented Tokamak Reactor With Low Activation Material And High Aspect Ratio Configuration

Real-time MHD feedback control system in Keda Torus eXperiment

Lower hybrid current drive experiments and improved performance on the HT-7 superconducting tokamak

Controlling a new plasma regime