Abstract:Grating Light Valve (GLV) is a kind of optics device based on Micro-Opto-Electro-Mechanical System (MOEMS) technology, utilizing diffraction principle to switch, attenuate and modulate light. In this paper, traditional GLV device's structure and its working principle are illuminated, and a kind of modified GLV structure is presented, with details introduction of the fabrication technology. The GLV structure includes single crystal silicon substrate, silicon dioxide isolating layer, aluminum layer of fixed ribbons and silicon nitride of movable ribbons. In the fabrication, lots of techniques are adopted, such as low-pressure chemical vapor deposition (LPCVD), photolithography, etching and evaporation. During the fabrication processes, Photolithography is a fundamental and fatal technology, which determines etching result and GLV quality. Some methods are proposed through repeated experiments, to improve etching result greatly and guide the practical application. This kind of GLV device can be made both small and inexpensively, and has been tested to show proper range of actuation under DC bias, with good performance. The GLV device also has merits such as low cost, simple technology, high fill ratio and low driving voltage. It can properly be well used and match the demands of high light power needed in laser phototypesetting system, as a high-speed, high-resolution light modulator.

Review and Development Trends of MEMS-based Spatial Light Modulator

Reflex Spatial Light Modulator Based on Micromirror Array Device

Research Development of Variable Optical Attenuator

A review of liquid crystal spatial light modulators: devices and applications

Technological Processes of Grating Light Valve As Diffractive Spatial Light Modulator in Laser Phototypesetting System

Analysis and Optimization of a Novel Laterally Deformable Optical NEMS Grating Transducer

Research Progress of Aberration Analysis and Imaging Technology Based on Metalens

Spatial Light Modulation for Femtosecond Laser Manufacturing: Current Developments and Challenges

MEMS-based adaptive optics scanning laser ophthalmoscopy

The Principle And Applications Of Two Novel Electrical Addressed Spatial Light Modulator

Fast and light-efficient wavefront shaping with a MEMS phase-only light modulator

A Novel Variable Optical Attenuator Based on Micro-Electromechanical System (MEMS)

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

Correction: Dielectric Metalens for Miniaturized Imaging Systems: Progress and Challenges

MEMS segmented-based adaptive optics scanning laser ophthalmoscope

Optical Interferometric MEMS Accelerometers

Simulative and Experimental Characterization of an Adaptive Astigmatic Membrane Mirror

Review of optical devices and systems based on microfluidics

A Study of Electronic Interface for Mems Variable Optical Attenuator (Voa)

High Precision Optical Wavefront Generation Using Liquid Crystal Spatial Light Modulator (LC-SLM)

Review and Prospect on Reflection Mode Micro-Opto-electro-mechanical System