Abstract:Good speech intelligibility is the primary goal of acoustic environment control in lecture rooms and auditoria. The speech transmission index (STI) is the primary objective evaluation metric for speech intelligibility. Therefore, accurate prediction of the STI during the design stage is important for acoustic environment control in lecture rooms and auditoria. Two types of STI prediction methods based on simulated impulse responses and statistical are recommended by the IEC standard. In this study, the prediction accuracy and influencing factors of these two types of prediction methods were systematically analysed using STI measurements collected at 25 receiver positions in six rooms. The results reveal the following. (1) When the influence of the signal-to-noise ratio (SNR) is not considered, for the STI prediction method based on simulated impulse responses, the prediction accuracy is in an acceptable range with the average predicted STI discrepancy of the 25 receiver positions being −0.004 and the maximum discrepancy being 0.046. For the STI prediction method based on statistical, the average predicted STI discrepancy of the 25 receiver positions was −0.015, and the maximum discrepancy was −0.091. STI prediction based on statistical exhibited a larger prediction error at the receiver positions close to the sound source and smaller prediction error at the receiver positions farther away from the sound source. (2) When the influence of the SNR was considered, the errors of both prediction methods increased significantly. For the STI prediction method based on simulated impulse responses, the average predicted STI discrepancy of the 25 receiver positions was −0.035 and the maximum discrepancy was −0.088. For the STI prediction method based on statistical, the average predicted STI discrepancy of the 25 receiver positions was −0.030 and the maximum discrepancy was −0.112. (3) Using a sound source that is different from the onsite measurement sound source can induce noticeable errors in both methods. (4) For the STI prediction method based on statistical using the actual Q value of the sound source, the prediction accuracy of receiver positions close to the sound source can be significantly improved and the effect on receiver positions farther away from the sound source is relatively small. (5) Both methods require significant technical expertise from users, rendering it difficult to obtain accurate prediction results during the design stage.

Improvement of the STI of Multiple Loudspeakers in Long Enclosures by Architectural Treatments

The speech intelligibility and applicability of the speech transmission index in large spaces

An Improved Method on Field Sound Insulation Measurement Using Loudspeaker Source

Improvement on Performance and Stability with Multiple Secondary Speakers in Duct ANC System

Improving the Performance of an Active Staggered Window with Multiple Resonant Absorbers

Noise Control in Enclosures: Modeling and Experiments with T-shaped Acoustic Resonators

Experimental comparisons of speech transmission index prediction methods

Experimental study of active acoustic wedge

Robust Time Domain Acoustic Contrast Control in an Arc-Shaped Area Using A Linear Loudspeaker Array

Ceiling baffles and reflectors for controlling lecture-room sound for speech intelligibility

A coherent model of sound propagation in long enclosures with different acoustics boundaries

On the Optimization of a Mixed Speaker Array in an Enclosed Space Using the Virtual-Speaker Weighting Method

Exploring Conventional Enhancement and Separation Methods for Multi‐speech Enhancement in Indoor Environments

Performance optimisation of small reverberant room with hanging diffusers

Case study of acoustics in two very large atriums

Speech Privacy in Open-Plan Offices. II. Developing a Model

Active Sound Radiation Control with Secondary Sources at the Edge of the Opening

Scale model studies on sound absorption of theater proscenium opening

Acoustic Transmission Enhancement Through a Soft Interlayer with a Reactance Boundary

Numerical study on acoustic matching between driver and resonator of loudspeaker-driven thermoacoustic refrigerator

Evaluation of robustness of sound field control with a circular double-layer array of loudspeakers