Recent Development of Thermoplastic Polyurethane(tpu) Elastomer Blends

李冲,陈旭东,廖正福

DOI: https://doi.org/10.16665/j.cnki.issn1005-3174.2006.05.016

2006-01-01

Abstract:The object of this article is to review progress in the study and development of thermalplastic polyurethane(TPU) elastomer blends.The present production situation at home and prospect of TPU elastomer alloys are analyzed briefly.

What problem does this paper attempt to address?

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

Minghao Sun,Yangke Xiao,Kan Liu,Xuan Yang,Pingwei Liu,Suyun Jie,Jijiang Hu,Shengbin Shi,Qingyue Wang,Khak Ho Lim,Zhenxue Liu,Bo-Geng Li,Wen-Jun Wang

DOI: https://doi.org/10.1002/cjce.24825

2023-01-01

Abstract:Polyolefin thermoplastic elastomers (TPE-Os) are high-performance polyolefins consisting of both plastic and rubber phases. Compared with other thermoplastic elastomers, the TPE-Os possess better chemical stability, transparency, re-processability, and electrical insulation, which renders their broad applications possible. By manipulating chain structures and topologies of the TPE-Os, differently structured polyolefins with improved thermal and mechanical properties have been developed, including ethylene and alpha-olefin random copolymers (POEs), olefin block copolymers (OBCs), comb-shaped polyolefin elastomers (CPOEs), and dynamically cross-linked polyolefin elastomers. Herein, we review the synthesis of the POE, OBC, CPOE, and dynamical cross-linked polyolefin elastomer, including the catalyst systems, polymerization techniques, processes, and kinetic modelling. The characterization of the TPE-Os and the relationships between the TPE-O chain structure, aggregated state, and product performance are discussed. The future development of higher-performance TPE-Os is envisaged.
Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Jian-Wen Shan,Yan-Bo Zhu,Ling-Ling Ni,Peng-Ju Pan

DOI: https://doi.org/10.1007/s10118-024-3219-0

2024-01-01

Chinese Journal of Polymer Science

Abstract:Viscoelastic properties of thermoplastic polyurethane (TPU) is of fundamental importance for its processing. In this work, we prepared different TPUs from polycaprolactone (PCL) diol, diphenylmethane-4,4′-diisocyanate (MDI), and 1,4-butanediol (BDO), and investigated the viscoelastic behavior of three TPUs with different hard segment content during thermal annealing process. The storage modulus (G′) of TPU increases over time in a medium annealing temperature (Ta) region, but remains unchanged at both high and low temperature regions. The growth of loss modulus (G″) over time is slower than that of G′. At medium Ta, both G′ and G″ increase during the repeating frequency (ω) sweep, due to the gradual crystallization of hard segments. This indicates that the crystallites primarily restrain the relaxation of unit with large size. The increments of G′ and G″ are weakened when the content of hard segment in TPU is decreased. For TPU with high content of hard segments, a complete high elastic platform with a width of 3 orders of magnitude was observed only through one frequency scan test at medium Ta. In addition, the crystallites of hard segments grow up continuously during frequency scan test (isothermal annealing treatment) and cause the extreme increase in G′ and G″ with ω in low ω region.
The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Daling Xiao,Xiuying Zhao,Yiping Feng,Ping Xiang,Liqun Zhang,Weimin Wang

DOI: https://doi.org/10.1002/app.31828

IF: 3

2010-01-01

Journal of Applied Polymer Science

Abstract:The organic hybrids of thermoplastic polyurethane (TPU)/hindered phenol (AO-80) were prepared through melt blending, which was followed by hot and cold pressing procedure. The microstructure and dynamic mechanical properties of the hybrids were systematically investigated through SEM, DSC, XRD, FTIR, DMA and a tensile tester. The experimental results indicated that AO-80 was completely dissolved in the matrix. The glass transition of the soft segments of TPU was found to shift to higher temperature with the amount of AO-80 increasing, whereas the glass transition of the hard segments exhibited nearly no evident change, indicating that AO-80 was selectively located in the soft region of TPU and the formation of the strong intermolecular interactions (hydrogen bonding) between AO-80 and the soft region of TPU. With the increase of AO-80 in the hybrids, the tan delta peak gradually shifted to higher temperatures and the maximal tan delta value increased from 0.4 to 1.6. Meanwhile, the glass transition temperature ranges broadened and the TA value increased greatly with the more content of AO-80. Because of the decrease of the hard segments amount in the hybrids, the tensile stress of these hybrids decreased, but still maintained at a high level. The hybrids were expected to have potential applications as high performance damping materials combined with good mechanical properties. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 116:2143-2150, 2010
A Recent blend of thermoplastic polyurethane (TPU)

Nor Azwin Ahad

DOI: https://doi.org/10.1088/1757-899x/957/1/012045

2020-10-01

IOP Conference Series: Materials Science and Engineering

Abstract:Abstract Polymer blending is a well-developed manufacturing process with features of efficient production, ease of processing and good controllability. It can effectively modify and adjust the properties of polymer in order to have greater mechanical, thermal and physical properties, and thus has been commonly used to make functional polymer materials. However, the differences in polarity as well as poor interfacial between each polymer in the blend will promote the difference in polarity between the immiscible and incompatible polymers, and then the blends did not succeed as a good blend. The blending of thermoplastic polyurethane (TPU) with other polymer has been widely study with focus on the improvement of mechanical properties, wear resistance, thermal stability, toughness and other related properties. This review only focuses on the latest studies on blending TPU with other polymer, just in the range of 3 years from 2017 to 2019.

English Else
Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Xiuying Zhao,DaLing Xiao,Sizhu Wu,Yiping Feng,Liqun Zhang,Weimin Wang

DOI: https://doi.org/10.1002/app.33198

IF: 3

2011-01-01

Journal of Applied Polymer Science

Abstract:By employing the melt blending method, selective hindered amines were oriented to disperse in the hard phase of thermoplastic polyurethane (TPU). The microstructure and performance of organic hybrids consisting of TPU and poly-[(1-hydroxyethyl -2,2,6,6- tetramethyl-4-hydroxyl piperidine)]-glycolsuccinate (GW-622) and poly{[6-(1,1,3,3-tetramethylbutyl) -imino]-[1,3,5-triazine-2,4- dimethyl] 1242,2,6,6- tetramethyl piperidinyl)- imino]-cyclohexane-[4-(2,2,6,6-tetramethyl piperidinyl)-imino]} (GW-944) were investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), scanning electric microscopy (SEM), and tensile measurement. The neat TPU matrix displayed only one glass transition peak in the DMA curve, whereas the TPU/GW-622 hybrids exhibited two overlapping loss peaks, and the TPU/GW-944 hybrids demonstrated two separated relaxation peaks. The second excited relaxation peak of the hybrids was attributed to the oriented distribution of hindered amine in TPU and strong intermolecular interactions between the hindered amine and the hard segments of TPU. The complex and interesting evolution in structure and properties of the hybrids with hindered amine incorporation was interpreted. The loss peak areas (TA) of the hybrids increased greatly, and the high temperature damping properties was expected to improve. This kind of novel hybrid presented a promising future as high performance damping material. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 906-913, 2011
Polyurethane/Polyolefin Blends: Morphology, Compatibilization and Mechanical Properties

JS Wang,XD Chen,NQ Zhang,MZ Rong

DOI: https://doi.org/10.1177/096739110601400101

2006-01-01

Abstract:The objective of this article is to review progress in the study and development of thermoplastic polyurethane (TPU)/polyolefin (PO) blends, a series of thermoplastic elastomers having the advantage of easy regulation of mechanical properties within a wide range. Important aspects including coalescence behaviour, compatibilizer species and compatilization mechanisms are discussed. The effects of interfacial interactions, surface free energy of the blend components, viscoelasticity and concentration of the dispersed phase, and mixing conditions are summarized and analyzed. Emphasis is placed on recent trends to produce stable TPU/PO blends with specific properties that are not available in either the single component of the blends or other polymers.
Recent developments for thermoplastic elastomer

Liu Congcong,Wu Shemao,Zhang Liqun

DOI: https://doi.org/10.3969/j.issn.1006-3536.2008.08.004

2008-01-01

Abstract:Thermoplastic elastomers(TPEs)combine the elastic and mechanical properites of rubbers with the melt processability of thermoplastic.A introduction will be given about the properities and applications of thermoplastic styrene,thermoplastic polyurethane and themoplastic polyolefin.A overreview will be given on the recent scientific of thermoplastic vulcanisates.
Study on the rheological, thermal and mechanical properties of thermoplastic polyurethane/poly (butylene terephthalate) blends

jintao huang,xiang lu,guizhen zhang,jinping qu

DOI: https://doi.org/10.1016/j.polymertesting.2014.03.006

IF: 5.1

2014-01-01

Polymer Testing

Abstract:Thermoplastic polyurethane (TPU)/poly (butylene terephthalate) (PBT) blends with different ratios were prepared by extrusion and injection molding. The morphology, dynamic viscoelastic, capillary rheological, thermal and mechanical properties of the blends were studied. Results showed that there was good compatibility between TPU and PBT. The capillary rheological properties showed that the apparent viscosity decreased with the TPU content. DSC analysis indicated that with increasing TPU content the crystallization temperature (Tc), the melting point (Tm) and the percent crystallinity (Xc) decreased. Mechanical properties showed that the addition of TPU could lead to a remarkable increase, about 368.18%, in impact strength with a small reduction in tensile and flexural strength of TPU/PBT blends.
Study on Morphology and Properties of PLA/Poly(epsilon-caprolactone)-based TPU Blends

韩娟娟,黄汉雄

2010-01-01

Abstract:In order to explore the way for toughening polylactide(PLA),poly(epsilon-caprolactone)based thermoplastic polyurethane elastomer(TPU)with excellent mechanical properties was applied to be blended with PLA.The mechanical properties,dynamic rheology,and phase morphology of PLA/TPU blends were studied.The results indicated that TPU improved the toughness of PLA significantly.With 30 wt% TPU,the elongation at break reached at 602.5%,and impact tests at room temperature could not break the notched impact sample,the Cole-Cole curves indicated the uniformity of TPU particles decreased with TPU content increased,the storage modulus-frequency curve of the blends gradually deviated from classical terminal behavior;TPU exhibited spherical droplets dispersed in PLA matrix,and there were long threads among these TPU droplets in blends with 30 wt% TPU,which disclosed the reasons for the enhanced toughness of the blend.
Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Yueyun Zhou,Lifa Luo,Wenyong Liu,Guangsheng Zeng,Yi Chen

DOI: https://doi.org/10.1155/2015/393582

IF: 2.0981

2015-01-01

Advances in Materials Science and Engineering

Abstract:To overcome the poor toughness of PC/PLA blends due to the intrinsic properties of materials and poor compatibility, thermoplastic urethane (TPU) was added to PC/PLA blends as a toughener; meantime, catalyst di-n-butyltin oxide (DBTO) was also added for catalyzing transesterification of components in order to modify the compatibility of blends. The mechanical, thermal, and rheological properties of blends were investigated systematically. The results showed that the addition of TPU improves the toughness of PC/PLA blends significantly, with the increase of TPU, the elongation at break increases considerably, and the impact strength increases firstly and then falls, while the tensile strength decreases significantly and the blends exhibit a typical plastic fracture behavior. Meantime, TPU is conducive to the crystallinity of PLA in blends which is inhibited seriously by PC and damages the thermal stability of blends slightly. Moreover, the increased TPU makes the apparent viscosity of blends melt decrease due to the well melt fluidity of TPU; the melt is closer to the pseudoplasticity melt. Remarkably, the transesterification between the components improves the compatibility of blends significantly, and more uniform structure results in a higher crystallinity and better mechanical properties.

materials science, multidisciplinary
Mechanical Property Study on Lightly Crosslinked Thermoplastic Polyurethane Elastomers

张永成,赵雨花,亢茂青,王心葵

DOI: https://doi.org/10.3969/j.issn.1001-9456.2004.02.016

2004-01-01

Abstract:Series of lightly crosslinked thermoplastic polyurethane elastomers with various degrees of crosslinking were synthesized by using TMP as crosslinking agent.The investigations showed that heat resistance and permanent set resistance of TPU were improved by lightly crosslinking,but other physical properties were affected at the same time.And the best condition of synthesis was obtained via investigating their dynamic mechanical properties.The various morphological structures were also investigated.
Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

W. Crone,X. Jing,Xiangfang Peng,Hao‐Yang Mi,L. Turng,M. Salick

DOI: https://doi.org/10.1002/ADV.21380

2014-03-01

Abstract:Thermoplastic polyurethane (TPU) has been widely used in many applications because of its broad range of properties. However, synthesis of TPU with desirable properties is time consuming and only produces limited quantities. In this paper, twin-screw extrusion was used to produce TPU blends of varying soft and hard segments with tunable properties. Foamed samples of TPU blends were produced by microcellular injection molding. Multiple characterization tests were performed to confirm the miscibility and tunability of the blends. It was confirmed that soft and hard TPUs were compatible at ratios of 2:1 and 1:2, but partially miscible at a ratio of 1:1. Rigidity increased while the shape-recovery rate decreased with increasing the hard TPU content. The blend ratio influenced the foaming morphology, solid skin-layer thickness, as well as mechanical properties. It was found that microcellular injection molding could reduce the injection-shot volume without sacrificing too much mechanical property and, compared with their solid counterparts, the foamed blends could retain mechanical properties better than foamed pure TPUs. Decomposition and degradation behaviors were also studied. The biocompatibility of soft and hard TPU-foamed samples, which could be potentially used as tissue engineering scaffolds, was confirmed by fibroblast cytotoxicity test. © 2013 Wiley Periodicals, Inc. Adv Polym Technol 2014, 33, 21380; View this article online at wileyonlinelibrary.com. DOI 10.1002/adv.21380

Engineering,Materials Science
Study of Thermoplastic Elastomer and Its Industrialization

Liqun Zhang

2012-01-01

Abstract:Varieties,market situation,industrialized progress and latest research direction of chemical synthesis type TPE and rubber-plastic blending type TPE are reviewed.New thermoplastic elastomer products such as polyamide TPE,thermally reversible covalent crosslinking TPE,metallocene catalytic polyolefin TPE,mesogen-jacketed liquid crystalline TPE,biobased TPE,and new thermoplastic vulcanizate,etc.with broad application prospects are introduced.Preparation methods,performance characteristics and market development of new thermoplastic elastomer products are also discussed in detail.Furthermore,the application fields and the industrialization development of the new thermoplastic elastomer products are predicted.
Study on Properties of Polyether and Polyester Polyurethane Elastomer

ZHANG Min,XIA Qing,WANG Hao,ZHANG Bao-feng,LI Meng

DOI: https://doi.org/10.3969/j.issn.1005-5770.2013.02.022

2013-01-01

Abstract:The thermoplastic polyurethane elastomer(TPU) was synthesized using polyether polyol of polyethylene glycol(PEG),poly(tetramethylene ether) glycol(PTMG),polyester polyol polycaprolactone(PCL) and 4,4'-diphenylmethane diisocyanate(MDI).The effect of isocyanate index(R0),hard segment concentration(Ch) and type,molecular weight and amount of polyether polyol on the performance of polyurethane elastomer were studied.In addition,the bisphenol A epoxy resin NPEL-127 were used to modified the polyurethane elastomer in order to improve its heat resistance.The results showed that: the hardness of TPU increases with increasing R0 and Ch;with the increase of molecular weight of the polyester and polyester diol,the hardness and mechanical properties of TPU was improved;the mechanical properties of polyester TPU was better than that of polyether TPU;the heat resistance of TPU modified by epoxy resin was improved.
Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Hui Fang,Lingjie Zhang,Anlin Chen,Fangjuan Wu

DOI: https://doi.org/10.3390/polym14081530

IF: 5

2022-04-09

Polymers

Abstract:Polylactic acid (PLA)-thermoplastic polyurethane (TPU) copolymer (PTC) was prepared by melting TPU pellets in molten lactide, followed by in situ ring-opening coordination polymerization. The results from FTIR and 1H-NMR confirmed the formation of the copolymer. PLA/TPU blends with different TPU contents were prepared by melt blending method. SEM and mechanical properties showed a conspicuous phase separation between PLA and TPU. In order to further improve the mechanical properties of the blend, PTC was used as the compatibilizer and the effects of the PTC content on the properties of the blend were investigated. The addition of PTC made TPU particles smaller in PLA matrix and improved the compatibility. With the loading of 5 wt.% PTC, the impact strength of the PLA/TPU blend reached 27.8 kJ/m2, which was 31.1% and 68.5% higher than that of the blend without PTC and pure PLA, respectively. As the content of PTC was more than 5 wt.%, the mechanical properties declined since the compatibilizer tended to form separate clusters, which could reduce the part distributed between the dispersed phase and the matrix, leading to a reduction in the compatibility of the blend. Moreover, the DMA results confirmed PTC could improve the compatibility between PLA and TPU.

polymer science
Properties and Microstructure of ABS/TPU Alloy

Li Lei,Zhou Jian,Wu Chengxu,Dong Guanxiu,Yang Runmiao,Yang Yanling

DOI: https://doi.org/10.3969/j.issn.1004-3055.2010.06.006

2010-01-01

Abstract:TPU as toughening agent and ABS as base material,ABS/TPU alloy was mixed by melting blend.The mechanical and thermal properties of the alloy were tested,and the effects of the content of TPU on mechanical,thermal properties and microstructure of ABS/TPU alloy were observed.The compatibility of alloy was also analyzed by FTIR.The test results show that there is some compatibility between polyester TPU and ABS,and the notched impact strength and melt flow rate of the alloy increase apparently with the increase of the content of TPU.
Advance on study of thermoplastic elastomers

Cui Wei,Yan Weidong,Li Yang

DOI: https://doi.org/10.3969/j.issn.1002-1396.2005.04.018

2005-01-01

Abstract:Thermoplastic elastomers (TPE) are widely used in automobile and electronic industry and are keeping the ever-increasing momentum for their superior mechanical properties and reprocessing ability.In recent years,the main studies were essentially focused on the development of TPEs of polyolefin by purposely utilizing the high activity and controllable stereospecificity of metallocene catalyst,the synthesis of polymers having specific structure that brought about the desired property and the applications of TPEs in environment protection and biomedical field.
Study on mechanical properties and phase morphology of thermoplastic polyurethane/polypropylene blends prepared with vane extruder

Weifeng Liu,Jinping Jinping,Shikui Jia,Yongqing Zhao

DOI: https://doi.org/10.4028/www.scientific.net/AMR.600.256

2012-01-01

Abstract:Thermoplastic polyurethane (TPU)/polypropylene (PP) blends with different weight ratios were prepared in a novel vane extruder generating global and dynamic elongational flow. The results indicated that the addition of TPU elastomer to PP significantly improved the mechanical properties of the blends. From the SEM micrographs it could be clearly observed dispersed TPU deformed to be fibers by the effect of elongational flow. Meanwhile the results observed from DSC curves revealed apparent partial miscibility of the blends and enhanced crystallization ability of PP due to the influence of elongational flow.
Properties And Crystallization Behavior Of Poly (Vinylidene Fluoride) (Pvdf)/Thermoplastic Polyurethane Elastomer (Tpu) Blends

Jing Cheng,Shichao Wang,Shuangjun Chen,Jun Zhang,Xiaolin Wang

DOI: https://doi.org/10.5004/dwt.2011.2791

IF: 1.1

2011-01-01

Desalination and Water Treatment

Abstract:A series of poly (vinylidene fluoride) (PVDF)/thermoplastic polyurethane elastomer (TPU) blends were prepared with various mass ratios via melt blending. The miscibility and crystallization behavior of blends were characterized by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), mechanical tests, wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). According to cross section morphological analysis, when the content of TPU was less than 25 wt%, PVDF appeared as a continuous phase while TPU appeared as a dispersed phase. The blend was a partially miscible system. With the further increase of TPU content, the presence of distinguishable boundaries at the polymer interfaces indicated that the PVDF/TPU blends were the immiscible systems. In addition, when the TPU content reached 50 wt%, the blend system displayed the lowest mechanical properties, which was attributed to the poor miscibility of the polymer blend. On the other hand, the samples presented predominantly a phase regardless of TPU content in the blends. Compared with neat PVDF, the melting and crystallization temperature of PVDF in the blends slightly decreased. It indicated no obvious interaction between the two polymers.
Thermoplastic polyurethanes: synthesis, fabrication techniques, blends, composites, and applications

Eduardo Henrique Backes,Samarah Vargas Harb,Leonardo Alves Pinto,Nayara Koba de Moura,Guilherme Ferreira de Melo Morgado,Juliano Marini,Fabio Roberto Passador,Luiz Antonio Pessan

DOI: https://doi.org/10.1007/s10853-023-09077-z

IF: 4.5

2024-01-20

Journal of Materials Science

Abstract:Thermoplastic polyurethanes (TPUs) have attracted increasing attention from the scientific and industrial communities due to their rich chemistry and wide fabrication techniques, which open up a vast field of application. Incorporating other polymers or fillers in TPU composition further expands TPU applicability. TPU blends and composites have been explored in medicine, agriculture, textiles, electronics, aeronautics, food packing, sensors, and automobiles. Soft and hard segments of different compositions have been combined to produce TPUs with specific properties, such as soft touch, elasticity, transparency, impact strength, chemical resistance, and elastic memory. Although petroleum-based precursors are still the most applied, green sources of diisocyanate, polyol, and chain extenders have been increasingly exploited. This review first addresses the fundamental chemistry, synthesis, fabrication techniques, and structure of TPUs and further compiles works on TPU blends and composites.

materials science, multidisciplinary

Recent Development of Thermoplastic Polyurethane(tpu) Elastomer Blends

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

A Recent blend of thermoplastic polyurethane (TPU)

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Polyurethane/Polyolefin Blends: Morphology, Compatibilization and Mechanical Properties

Recent developments for thermoplastic elastomer

Study on the rheological, thermal and mechanical properties of thermoplastic polyurethane/poly (butylene terephthalate) blends

Study on Morphology and Properties of PLA/Poly(epsilon-caprolactone)-based TPU Blends

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Mechanical Property Study on Lightly Crosslinked Thermoplastic Polyurethane Elastomers

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Study of Thermoplastic Elastomer and Its Industrialization

Study on Properties of Polyether and Polyester Polyurethane Elastomer

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Properties and Microstructure of ABS/TPU Alloy

Advance on study of thermoplastic elastomers

Study on mechanical properties and phase morphology of thermoplastic polyurethane/polypropylene blends prepared with vane extruder

Properties And Crystallization Behavior Of Poly (Vinylidene Fluoride) (Pvdf)/Thermoplastic Polyurethane Elastomer (Tpu) Blends

Thermoplastic polyurethanes: synthesis, fabrication techniques, blends, composites, and applications