Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Postbuckling of Rectangular Plates under Uniaxial Compression Combined with Lateral Pressure

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

ELASTIC BUCKLING OF SIMPLY SUPPORTED RECTANGULAR PLATES UNDER BENDING,SHEAR AND BEARING STRESSES

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

LOCAL BUCKLING OF I-SECTIONS IN COMPRESSION AND BENDING

Exact Solution for Axisymmetric Deformation of Laminated Transversely Isotropic Annular Plates

Nonlocal Vibration and Biaxial Buckling of Double-Viscoelastic-fgm-nanoplate System with Viscoelastic Pasternak Medium in Between

Nonlinear Postbuckling Behavior of a Simply Supported, Uniformly Compressed Rectangular Plate

Post-buckling path and free vibration of a symmetric laminated plate vertically coupled with fluid under in-plane load

Post-buckling Behavior of Rectangular Multilayer FG-GPLRC Plate with Initial Geometric Defects Subjected to Non-Uniform In-Plane Compression Loads in Thermal Environment

LARGE DEFLECTION BEHAVIOUR OF RECTANGULAR PLATES UNDER INPLANE COMPRESSION

Buckling Analysis of Laminated Plates with Asymmetric Layup by Approximation Method

Buckling and post-buckling of anisotropic at panels subjected to axial and shear in-plane loadings accounting for classical and refined structural and nonlinear theories

Buckling behavior of rectangular angle-ply laminated composite plates subjected to thermal and mechanical loads using the meshfree method

Buckling of Symmetrical Cross-Ply Composite Rectangular Plates under a Linearly Varying In-Plane Load

Finite Deformation Analysis of the Elastic Circular Plates under Pressure Loading

Tension buckling and postbuckling of nanocomposite laminated plates with in-plane negative Poisson's ratio

Theoretical and numerical analysis of buckling stability of bi-directional corrugated sandwich panels

Analytic Solution for Buckling Problem of Rectangular Thin Plates Supported by Four Corners with Four Edges Free Based on the Symplectic Superposition Method

Multiwall Rectangular Plates under Transverse Pressure-A Non-Linear Experimental and Numerical Study