Abstract:Particle deposition on the surface of a drying chamber is the main drawback in the spray drying process, reducing product recovery and affecting the quality of the product. In view of this, the potential application of chemical surface modification to produce a hydrophobic surface that reduces the powder adhesion (biofouling) on the wall of the drying chamber is investigated in this study. A hydrophobic polydimethylsiloxane (PDMS) solution was used in the vertical dipping method at room temperature to determine the optimum coating parameters on borosilicate glass and stainless steel substrates, which were used to mimic the wall surface of the drying chamber, to achieve highly hydrophobic surfaces. A single-factor experiment was used to define the range of the PDMS concentration and treatment duration using the Response Surface Methodology (RSM). The Central Composite Rotatable Design (CCRD) was used to study the effects of the concentration of the PDMS solution (X1, %) and the treatment duration (X2, h) on the contact angle of the substrates (°), which reflected the hydrophobicity of the surface. A three-dimensional response surface was constructed to examine the influence of the PDMS concentration and treatment duration on contact angle readings, which serve as an indicator of the surface's hydrophobic characteristics. Based on the optimisation study, the PDMS coating for the borosilicate glass achieved an optimum contact angle of 99.33° through the combination of a PDMS concentration of X1 = 1% (w/v) and treatment time of X2 = 4.94 h, while the PDMS coating for the stainless steel substrate achieved an optimum contact angle of 98.31° with a PDMS concentration of X1 = 1% (w/v) and treatment time of X2 = 1 h. Additionally, the infrared spectra identified several new peaks that appeared on the PDMS-treated surfaces, which represented the presence of Si-O-Si, Si-CH3, CH2, and CH3 functional groups for the substrates coated with PDMS. Furthermore, the surface morphology analysis using the Field Emission Scanning Electron Microscopy (FESEM) showed the presence of significant roughness and a uniform nanostructure on the surface of the PDMS-treated substrates, which indicates the reduction in wettability and the potential effect of unwanted biofouling on the spray drying chamber. The application of PDMS and PTFE on the optimally coated substrates successfully reduced the amount of full cream milk particles that adhered to the surface. The low surface energy of the treated surface (19–27 mJ/m2) and the slightly higher surface tension of the full cream milk (54–59 mJ/m2) resulted in a high contact angle (102–103°) and reduced the adhesion work on the treated substrates (41–46 mJ/m2) as compared to the native substrates.

Surface-hydrophilic and protein-resistant silicone elastomers prepared by hydrosilylation of vinyl poly(ethylene glycol) on hydrosilanes-poly(dimethylsiloxane) surfaces

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Functionalization of Hydrogen-Terminated Silicon Via Surface-Initiated Atom-Transfer Radical Polymerization and Derivatization of the Polymer Brushes

Preparation and Properties of a Ph-Responsive PDMS Platform

Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels

Grafting epoxy-modified hydrophilic polymers onto poly(dimethylsiloxane) microfluidic chip to resist nonspecific protein adsorption

Amphiphilic silicones to reduce the absorption of small hydrophobic molecules

Surface Functionalization of Poly(N-Vinylpyrrolidone) onto Poly(Dimethylsiloxane) for Anti-Biofilm Application

Active Protein-Functionalized Poly(Poly(Ethylene Glycol) Monomethacrylate)-Si(100) Hybrids from Surface-Initiated Atom Transfer Radical Polymerization for Potential Biological Applications

Tunable cohesion and water lubrication of PEG- g -PMHS- c -PMVS copolymer membranes

Anti-marine biofouling adhesion performance and mechanism of PDMS fouling-release coating containing PS-PEG hydrogel

Constructing a biomimetic robust bi-layered hydrophilic lubrication coating on surface of silicone elastomer

Solution-phase Surface Modification in Intact Poly(dimethylsiloxane) Microfluidic Channels.

Response Surface Optimisation of Polydimethylsiloxane (PDMS) on Borosilicate Glass and Stainless Steel (SS316) to Increase Hydrophobicity

Surface functionalization of silicone rubber for permanent adhesion improvement

Separation of Proteins on Surface‐modified Poly(dimethylsiloxane) Microfluidic Devices

Surface Reconstruction of Silicone-Based Amphiphilic Polymers for Mitigating Marine Biofouling

Deposition of PEG onto PMMA microchannel surface to minimize nonspecific adsorption.

Systematic Characterization of Hydrophilized Polydimethylsiloxane

Amphiphilic Graft Copolymers Based on Ultrahigh Molecular Weight Poly(styrene-Alt-maleic Anhydride) with Poly(ethylene Glycol) Side Chains for Surface Modification of Polyethersulfone Membranes