Abstract:This paper presents an investigation into the performance of in-wheel motor (IWM) based electric vehicles (IWM-EV) in the longitudinal direction. The design of IWM-EV is an innovation of the conventional go-kart vehicle with slightly modifications in steering, suspension, and braking system, which then makes use three-phase permanent magnet synchronous in-wheel motor (PMSM-IWM) at both of the rear axle wheels. An extension of that is a simulation of IWM-EV vehicle using a 5-degree-of-freedom vehicle longitudinal model that has been developed by incorporating PMSM-IWM as a drive wheel located at the rear axles. Using the simulation, vehicle dynamic control in the longitudinal direction-based Proportional-Integral-Derivative (PID) controller has also been strategized. As the intention to confirm the capability of the IWM-EV, experimental studies-based real IWM-EV hardware have been conducted. Three dynamic tests that generalized from SAE standard SAE J866-199908, namely acceleration performance at the level pavement (include acceleration tests and acceleration then braking tests) and road gradient tests at constant speeds of 10, 15 and 20 km/h, were used as the testing method. The performance areas evaluated were vehicle body speed, wheel speed, distance travel experienced by the vehicle, IWMs current, drive torque as well as the battery voltage capacity used by the vehicle. The finding indicate that the simulation results and experimental data are similar with less than 5 % error. The outcomes from this study will be considered in the design optimization of a torque vectoring control in the next research study.

Development and Performance Characterization of an Electric Ground Vehicle with Independently Actuated In-Wheel Motors

Analysis and optimization of energy efficiency for an electric vehicle with four independent drive in-wheel motors

Vehicle Dynamic Simulation for Efficiency Optimization of Four-wheel Independent Driven Electric Vehicle

Study on a Novel In-Wheel Motor Driving System Driven by Two Permanent Magnet Synchronous Disc Motors

Numerical Energy Analysis of In-wheel Motor Driven Autonomous Electric Vehicles

Dynamic Testing of In-Wheel Motor Based Electric Vehicle in Longitudinal Direction

Energy efficiency optimization of electric vehicle driven by in-wheel motors

Fault-Tolerant Control for Electric Ground Vehicles With Independently-Actuated In-Wheel Motors

Simulation of performance of 4WD electric vehicle

An Integrated Control Framework for Torque Vectoring and Active Suspension System

In-Wheel Motor Fault Diagnosis For Electric Ground Vehicles

Multi-Objective Optimization and Performance Comparison of Different Driving Configurations of In-Wheel Motors

Driving Force Distribution and Control for EV with Four In-Wheel Motors: A Case Study of Acceleration on Split-Friction Surfaces

A Critical Review of Radial Field In-Wheel Motors: Technical Progress and Future Trends

Design and Operation Simulation of a Direct-Drive In-Wheel Motor for EV

An Integrated Vibration Elimination System with Mechanical-Electrical-Magnetic Coupling Effects for In-Wheel-Motor-Driven Electric Vehicles

Design of an Adaptive Fo-Pid Controller for an In-Wheel-Motor Driven Electric Vehicle

System Design and Energetic Characterization of a Four-Wheel-driven Series–parallel Hybrid Electric Powertrain for Heavy-Duty Applications

Four Wheel Independent Electric Drive off Road Vehicle Test Bed

A hierarchical energy efficiency optimization control strategy for distributed drive electric vehicles

Fault-Tolerant Control Of Electric Ground Vehicles With Independently-Actuated Wheels