Abstract:This study developed a comprehensive model that integrated fluid finite element computational mechanics, powder discrete element dynamics, and molten pool heat and mass transfer. The model accurately described the various phenomena occurring during the laser cladding process. This model, known as the multi-angle powder–gas–laser–liquid multiphase coupling model, extensively elucidated powder–gas transport, laser energy distribution, and heat and mass transfer within the molten pool. Additionally, the model comprehensively simulated the entire process of powder flow, from the nozzle to the formation of the cladding, even under varying substrate inclinations at different angles. Additionally, the study investigated the influence of substrate deflection angles, laser power, and scanning speed on the morphology of the cladding layer. The results revealed that as the substrate deflection angle varied from 0° to 150°, the height of the cladding layer first decreased and then increased, reaching a minimum value of 0.34 mm at 90°. Similarly, at a deflection angle of 90°, the width and offset of the layer first increased and then decreased, reaching peak values at 2.96 mm and 116 μm, respectively. However, the depth of the cladding layer displayed minimal variations, with an initial decrease followed by an increase. Moreover, as the laser power increased from 900 to 1500 W, the height, width, depth, and offset of the cladding layer gradually increased. Conversely, as the scanning speed increased from 5 to 11 mm/s, the dimensions of the layer gradually decreased. These findings address current challenges in numerical simulations, such as discontinuity and staging issues. Moreover, the findings provide valuable theoretical guidance for selecting and optimizing process parameters in multi-angle laser cladding, thereby filling a crucial knowledge gap.

Application of 3-D finite element method using Lagrangian formulation to dilution control in laser cladding process

Three-Dimensional Finite Element Modeling of Laser Cladding Process

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Investigation on composition distribution of dissimilar laser cladding process using a three-phase model

3-D Transient Numerical Simulation on the Process of Laser Cladding by Powder Feeding

Analysis Model of Dilution and Related Factor in Process of Powder Feeding Laser Cladding

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Numerical simulation method of the multi-field coupling mechanism for laser cladding 316L powder

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Optimization of Laser Cladding Forming Parameters by Numerical Simulation to Minimize the Cracking Posibilitys

A multi-angle numerical model for laser cladding from the nozzle to cladding formation

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Numerical Simulation Considering Latent Heat Effect for Laser Cladding Process

Numerical simulation on cladding track, fluid flow field and temperature field in laser cladding process with powder feeding

Computational Mechanics of Laser Cladding Process

Modeling and simulation of 3D geometry prediction and dynamic solidification behavior of Fe-based coatings by laser cladding

Analysis and Prediction of Geometrical Shapes and Dilution Rate in Laser Cladding Repair of Ti-6Al-4V Alloy

Simulation and Calculation of 3D Laser Cladding Temperature Field of Ceramic-Metal Composite Coatings by Finite Element Method

Analytical modelling of full single-track profile in wire-fed laser cladding

Finite element analysis of effects of dynamic preheating on thermal behavior of multi-track and multi-layer laser cladding

Multicomponent Multiphase Modeling of Dissimilar Laser Cladding Process with High-Speed Steel on Medium Carbon Steel