Modeling and simulation of 3D geometry prediction and dynamic solidification behavior of Fe-based coatings by laser cladding

Liaoyuan Chen,Yu Zhao,Boxue Song,Tianbiao Yu,Zhe Liu

DOI: https://doi.org/10.1016/j.optlastec.2021.107009

2021-07-01

Abstract:<p>To accurately predict the three-dimensional (3D) characteristics of the coating and dynamic solidification process during coaxial powder-fed laser cladding, an improved 3D multi-physics finite element model including heat transfer, fluid flow, shielding gas pressure, powder temperature-rise, surface tension, and free surface movement is proposed. The input parameters of the model only depend on the thermophysical properties of the deposited material and the process parameters. Therefore, the model has good universality, and can be flexibly applied in other laser cladding systems or deposited materials. The average width and height error for the experimental and simulated is 6.05% and 4.15%, respectively. The numerical model has good abilities to predict the 3D geometry of the coating. The accuracy of the model can be indeed improved by considering the powder temperature-rise and shielding gas pressure during the modeling process. The dynamic growth process of the coating, spatiotemporal variations of the temperature and temperature gradient were discussed in detail to reveal the solidification mechanism. Finally, the relationship between the crystal characteristic (planar, cellular, columnar, and equiaxed grains) and thermal parameters (the temperature, the temperature gradient, and the solidification rate) was established. The results show that the temperature gradient and undercooling at the solidification interface are significantly responsible for the crystal characteristic, while the grain size is mainly governed by the solidification rate.</p>

optics,physics, applied

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to accurately predict the three - dimensional geometric characteristics and dynamic solidification process of the coating during the coaxial powder - feeding laser cladding process. To achieve this goal, the paper proposes an improved three - dimensional multi - physics finite - element model, which includes factors such as heat transfer, fluid flow, shielding gas pressure, powder temperature rise, surface tension and free - surface movement. Through this model, researchers can better understand the growth process of the coating, the spatio - temporal changes of temperature and temperature gradient, and the relationship between these factors and crystal characteristics (planar, cellular, columnar and equiaxed grains). In addition, this model also takes into account the influence of powder temperature rise and shielding gas pressure on the simulation results, improving the model's ability to predict the three - dimensional geometry of the coating.