Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

Analysis of Functional Reliability and Its Parameter Sensitivity in Aircraft Fuel Pipelines

Dynamic strength reliability analysis of an aircraft fuel pipe system

Parameter Sensitivity and Resonance Reliability of a Fluid-Filled Pipeline

Analysis of Functional Simulation of Aircraft Fuel System

The Analysis on the Response Characteristics of Pipelines With Changing Parameters Under Random Traffic Loads

Testing and Analyzing Dynamic Response of Aviation Pipeline Based on Error Reliability Distribution

Study on Simulation Analysis for Airplane Fuel System

Non-probabilistic Reliability Analysis on Resonance of Fluid-Filled Pipeline Based on Kriging Model

Reliability and Residual Strength Analysis of Corroded Pipeline

Dynamic Reliability Of Aircraft Hydraulic Pipelines Under Random Pressure Pulsation And Vibration

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

ANALYSIS OF RESONANCE RELIABILITY SENSITIVITY FOR PIPES CONVEYING NON-UNIFORM AXIAL FLUID

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

Dynamic Reliability and Global Sensitivity Analysis for Hydraulic Pipe Based on Sparse Grid Integral Method

Modeling and Simulation Analysis of an Airplane Fuel System

Reliability Analysis On Wing Structures Under The Gust Load

Reliability Analysis of Certain Aircraft's Hydraulic Pipe

Fault Tree Analysis of Bleed Air Anti-icing Pipeline System Based on Interral Analysis Method

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Reliability analysis of gas pipeline with corrosion defect based on finite element method

Resonance Reliability and Importance Measure Analysis of Multi-Span Pipe Conveying Fluid Embedded in Temperature-Varying Matrix