Abstract:In-situ irradiations using 1 MeV Kr2+ ions in a transmission electron microscope were performed on extraction replica samples containing M23C6 carbides and MX carbonitrides from two ferritic-martensitic (FM) steels: (i) 9%Cr-1%W-TaV based Eurofer97 and (ii) 9%Cr-1%Mo-VNb (all in wt.%) based additively manufactured (AM) Grade91 steel. The irradiations were performed between 100 – 773 K up to a maximum dose of ∼2.4 displacements per atom (dpa). The M23C6 carbides are highly susceptible to radiation induced amorphization (RIA), while the MX type nanoprecipitates are highly amorphization resistant across the entire irradiation temperature range. Between 100 – 423 K, RIA of M23C6 carbides occurs very rapidly with critical amorphization doses ranging between ∼0.35 – 0.9 dpa, increasing to higher doses at 573 K. Complete amorphization of the M23C6 carbides up to doses of ∼2.4 dpa is not possible at 773 K under the present irradiation conditions. The critical amorphization dose of M23C6 carbides increases nearly exponentially with irradiation temperature. The critical temperature for the crystalline-to-amorphous phase transformation (Tc→a) of M23C6 carbides irradiated as replica samples, i.e. without the surrounding metal matrix, was estimated to be ∼812 K. Comparing the present results with neutron irradiation data on bulk samples reveals a decrease in the critical amorphization dose for M23C6 and an increase of Tc→a, highlighting the effect of dose rate on the amorphization behavior that is qualitatively consistent with literature on other non-metals. Changes in the minor chemistry of M23C6, such as presence or absence of W, V, Nb, Mo, seems to have little effect on the amorphization behavior. In-situ irradiations on extraction replica samples provide a novel pathway to explore radiation tolerance of nanoprecipitates in nuclear structural materials without interference from the matrix.

Irradiation Induced Localized Amorphization in Mo-Re Alloy Films

Irradiation Effect of Molybdenum-Rhenium Alloy

The Effect of Rhenium Content on Microstructural Changes and Irradiated Hardening in W-Re Alloy under High-Dose Ion Irradiation

In-situ TEM observation of loop evolution in Mo-5Re alloy under Fe+ irradiation

Molecular dynamic simulations of displacement cascades in molybdenum and molybdenum-rhenium alloys

Understanding the hot deformation behavior of Mo 42Re alloy: Insights from strain rate sensitivity, microstructure, and misorientation

Different Alloying Behaviors of Co-Mo Multilayered Films Upon Ion Irradiation and Thermal Annealing

Mechanical and microstructural responses in molybdenum-rhenium alloys under hot compressions

Effects Of Ion Irradiation On Mechanical Property Of Zr50.7cu28ni9al12.3 Amorphous Alloy

Hot Deformation Behaviors and Microstructural Evolution of Mo-42Re Alloy Prepared by Electron Beam Melting

Irradiation damage behavior of the non-equal atomic AlNbMoZrB high-entropy alloy

Microstructure Evolution in Zr-Mo Multilayers Induced by Ion Irradiation

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Irradiation effects in the Ni-17Mo-7Cr alloy bombarded with MeV Au ions

Some New Structural Transformations Induced By Ion-Beams

Tensile behavior and microstructure evolution of Mo-14 %Re alloy at room temperature and elevated temperatures

Deformation mechanism diagram and deformation instability of a Mo–Re alloy during the hot compression

Radiation induced amorphization of carbides in additively manufactured and conventional ferritic-martensitic steels: In-situ experiments on extraction replicas

Irradiation-induced Segregation at Dislocation Loops in CoCrFeMnNi High Entropy Alloy

Disclination Loops in Ni-Mo Amorphous Alloy Films Induced by Ion Irradiation

Atomistic investigation on radiation-induced segregation in W-Re alloy under cumulative flux irradiation: A hybrid simulation with MD and VC-SGC-MC