Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Study on new copper-containing SOFC anode materials

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Anode Performance of Mn-doped Ceria–scsz for Solid Oxide Fuel Cell

Improving electrochemical performance of (Cu, Sm)CeO2 anode with anchored Cu nanoparticles for direct utilization of natural gas in solid oxide fuel cells

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC

Fabrication and Performance of Direct Methane SOFC with a Cu-CeO2-Based Anode

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

A Regenerative Coking and Sulfur Resistant Composite Anode with Cu Exsolution for Intermediate Temperature Solid Oxide Fuel Cells

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Performance Investigation of a Nickel Cermet Anode Modified with Copper, Alkaline Earth Metal Oxide, Boron, and Perovskite for Direct Methane Fuel Cell

Catalytic Modification of Ni–Sm-doped Ceria Anodes with Copper for Direct Utilization of Dry Methane in Low-Temperature Solid Oxide Fuel Cells

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Cu–CeO2/YSZ electrodes for SOFCs: role of cermet meso/nanostructure in methane oxidation

In Situ Exsolved NiFe/(NiFe)O x Core–Shell-Structured Nanocatalysts on Perovskite Anode with Enhanced Coking Resistance

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells

Characterization of Cu–impregnated Sr2–MgMoO6– composite ceramic anode for SOFCs