Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

Stress Analysis of an Inclined Borehole in Bedded Formation

ANALYSIS OF STRESS AND DISPLACEMENT AROUND A DEEP CIRCULAR TUNNEL IN VISCOELASTIC SOIL

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Numerical Analysis of Borehole Stability in the Bedded Formation

Wellbore stability analysis of inclined wells in transversely isotropic formations accounting for hydraulic-mechanical coupling

Numerical modeling of wellbore stability in layered rock masses

An Approach for Predicting Stress-Induced Anisotropy Around a Borehole

Unified Solution of a Borehole Problem with Size Effect

An Analytical Approach For Cased Borehole Stress Calculation In General Anisotropic Formations

A revisit to the Lekhnitskii-Amadei solution for borehole stress calculation in tilted transversely isotropic media

Model study of borehole stability

Simulation of the Effect of Stress-Induced Anisotropy on Borehole Compressional Wave Propagation

Stability of highly inclined non-circular wellbores in isotropic formations

The combined effect of drilling fluid, in-situ stresses and inclination on wellbore stability

Experimental and numerical simulation investigation of the deformation characteristics of vertical boreholes under non-uniform horizontal principal stress

Theoretical Analysis and Application for Borehole Wall Stability Based on Stress Field

Analytical Solution for Estimating the Stress State in Backfill Considering Patterns of Stress Distribution

Research on Wellbore Instability of Shale Formation in Extremely Complex Geo-Mechanical Environment

Numerical Modeling of the Effect of Borehole Stress Concentration on Sonic Logging Measurements in Shale Formations

A Wellbore Stability Numerical Approach For Complex Geologic Condition

STABILITY ANALYSIS OF WELLBORE BASED ON ANISOTROPIC STRENGTH CRITERION FOR DEEP JOINTED ROCK MASS