Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

Cylindrical Borehole Failure in a Poroelastic Medium

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Dynamic torsional response of an end bearing pile in saturated poroelastic medium

Dynamic interaction of circular tunnel in viscoelastic saturated soil

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Unified Solution of a Borehole Problem with Size Effect

Short- and Long-term Wellbore Stability Analysis for a Horizontal Well in a Transversely Isotropic Poroelastic Formation

Dynamic Response of a Tunnel Buried in a Saturated Poroelastic Soil Layer to a Moving Point Load

Torsional Response of Pile Embedded in a Poroelastic Medium

Response of Transversely Isotropic Poroelastic Half-Space to Moving Load

Finite Element Analysis for Wellbore Stability of Transversely Isotropic Rock with Hydraulic-Mechanical-damage Coupling

Elastoplastic analysis of normal stiffness of bore wall of the rock-socketed pile based on Hoek-Brown failure criterion and cavity expansion theory

Strength and damage evolution mechanism of rock mass with holes under cyclic loading

Failure patterns caused by localized rise in pore-fluid overpressure and effective strength of rocks

Stability of highly inclined non-circular wellbores in isotropic formations

Time-dependent borehole stability in hard-brittle shale

Porochemothermoelastic Solutions Considering Fully Coupled Thermo-Hydro-mechanical-chemical Processes to Analyze the Stability of Inclined Boreholes in Chemically Active Porous Media

Parametric sensitivity study of wellbore stability in transversely isotropic medium based on polyaxial strength criteria

Borehole Instabilities in Granular Rocks Revisited: A Multiscale Perspective

Numerical study on strength and failure characteristics of rock samples with different hole defects

Failure behavior of horseshoe-shaped tunnel in hard rock under high stress: Phenomenon and mechanisms