Abstract:The performance of the piezo-composite transducer is greatly influenced by the matching layers. Based on finite element analysis and artificial intelligence, an optimization design method is proposed to optimize the matching layers of a 2–2 piezo-composite transducer for biomedical imaging. The neural networks are trained by the finite element analysis data to build up the mapping relationship between the thickness of matching layers and the performance. The optimization criteria are established based on the performance (centre frequency, bandwidth, and peak-to-peak voltage) and minimizing the material consumption. The thicknesses of matching layers are optimized by using a particle swarm optimization algorithm. The optimized thicknesses of both matching layers are 49 μm. The optimized centre frequency, bandwidth, and peak-to-peak voltage are 9.1 MHz, 72.5%, and 2.26 V, which can nearly achieve the designed targets (9.5 MHz, 75%, and 2.20 V). According to the optimized thicknesses of matching layers, the fabricated 2–2 piezo-composite transducer exhibits a centre frequency of 9.8 MHz, a bandwidth of 79.6%, and a peak-to-peak voltage of 2.11 V verifies the effectiveness and availability of the proposed method. Then, the piezo-composite transducer is hard-pressed for ultrasonic imaging. The press-focused piezo-composite transducer has an insertion loss of -19.1 dB at 10 MHz, a lateral resolution of 125 μm at 4 mm, and an axial resolution of 132 μm. The good resolution was confirmed by scanning the pig eyeball, which suggests that the 2–2 piezo-composite transducer with optimized matching layers has great potential in biomedical imaging.

The Parameters Selection of Matching Layer of Ultrasonic Transducers

The study of matching layers for high-end ultrasonic transducers

Intelligent Optimization of Matching Layers for Piezoelectric Ultrasonic Transducer

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Dependence of functional mechanism of matching layer on excitation signal type for ultrasonic transducers-2

Micromechanical Piezoelectric Micromachined Ultrasonic Transducer array package enhancement with integrated frontliners

Research on Broadband Matching Method for Capacitive Micromachined Ultrasonic Transducers Based on PDMS/TiO2 Particles

Matching layer design of a 2–2 piezo-composite ultrasonic transducer for biomedical imaging

Ultra-wideband underwater acoustic transducer with a gradient impedance matching layer

Fabrication and Modeling of Matching System for Air-Coupled Transducer

Optimized Design of High-Temperature Resistant Air-Coupled Ultrasonic Transducer (ACUT) Based on Single Acoustic Matching Layer

Investigations Of Coupling Acoustic Matching In Multilayer Acoustic Structures

Novel multi-layer-composites design for ultrasonic transducer applications

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Optimized Backing Layers Design for High Frequency Broad Bandwidth Ultrasonic Transducer

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Tunable high acoustic impedance alumina epoxy composite matching for high frequency ultrasound transducer

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Study on multi-frequency characteristics of a longitudinal ultrasonic transducer with stepped horn

Complementary Acoustic Metamaterial for Penetrating Aberration Layers

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy