Abstract:Effective corrosion inhibition of mild steel 1030 at 0.01 M NaCl concentration was achieved by the use of the nontoxic surfactant salt cetrimonium trans-4-hydroxy-cinnamate (CTA-4OHcinn). Polarization analysis on the steel samples immersed for 24 h in the control and CTA-4OHcinn-containing solutions shows the development of a passivation potential that is more obvious at higher inhibitor concentrations along with a maximum inhibition efficiency of 97.8%. Electrochemical impedance spectroscopy (EIS) pinpoints the effect of the inhibitor on the corroding regions of the metal surface, showing an increase in the local electric resistance and conversely a decrease in the local capacitance, which indicates that the charge transfer in the corroding regions is being hindered by a deposition process. This is consistent with scanning electron microscopy (SEM) images, showing the presence of a porous oxide matrix that fills localized corrosion sites on the metal surface after 24 h of immersion in a 0.01 M NaCl + 10 mM inhibitor solution. Additionally, SEM analysis also shows the formation of an organic film surrounding the defects that is able to shield chloride attack. As a result of diffusion of chloride from the defects below the protective film, filiform corrosion can be seen. Time-resolved impedance analysis over the first 120 min of immersion in the control and inhibitor solution shows that significant inhibitor protection does not take place immediately and there is a lag phase in the first 50 min of immersion, suggesting that early localized corrosion drives further adsorption of inhibitor micelles on the metal surface. This is in agreement with X-ray photoelectron spectroscopy (XPS) analysis, which indicates a complete surface coverage over the first 2 h of immersion in a concentrated inhibitor solution. XPS also shows the heterogeneity of the film, where some parts are poorly covered, revealing the underlying surface containing iron.

Corrosion Inhibition Behavior of Brass Tube by Sodium Diethyldithiocarbamate

Corrosion behavior of brass in SCW-SDBS-TiO2 nanofluid

Electrochemical Studies of Polyaspartic Acid and Sodium Tungstate As Corrosion Inhibitors for Brass and Cu30Ni Alloy in Simulated Cooled Water Solutions

Inhibition of Copper Corrosion in Sodium Chloride Solution by the Self-Assembled Monolayer of Sodium Diethyldithiocarbamate

Effects of TiO₂ Nanofluid on the Surface State of Brass

Tracking crop phenological development of spring wheat using synthetic aperture radar (SAR) in northern Ontario, Canada

Computational, theoretical and experimental studies of four amino acids as corrosion inhibitors for brass in 3% NaCl medium

e-Government 2015: exploring m-government scenarios, between ICT-driven experiments and citizen-centric implications

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Inhibition Effect of Triphenylmethane Dyes for the Corrosion of Carbon Steel in CO2-Saturated NaCl Corrosion Medium

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Synergistic effect of water solubility sulfhydryl compound and rare-earth ions on the microstructure, composition, and corrosion resistance of brass

Particle Properties of Air Nanobubbles and Their Inhibition Mechanism on Brass Corrosion in Recirculating Cooling Water: Effects of Concentration Ratio and Flow Velocity

Effects of Dodecyltrimethylammonium Bromide Surfactant on Both Corrosion and Passivation Behaviors of Zinc Electrodes in Alkaline Solution

Electrochemical and Surface Characterization Study on the Corrosion Inhibition of Mild Steel 1030 by the Cationic Surfactant Cetrimonium Trans-4-hydroxy-cinnamate

The effect of N and S ratios in N, S co-doped carbon dot inhibitor on metal protection in 1 M HCl solution

Electrochemical and Theoretical Study of Corrosion Inhibition on Carbon Steel in 1M HCl Medium by 1,10-Bis(4-Amino-3-Methyl-1,2,4-Triazole-5-Thioyl)Decane

Experimental and Molecular Simulation Studies of N, S-doped Carbon Dots as an Eco-friendly Corrosion Inhibitor for Protecting Cu in HCl Environment

CORROSION INHIBITION EFFECT OF BISQUATERNARY AMMONIUM SALT OF ROSIN GROUP TO MILD STEEL IN HYDROCHLORIC ACID

Electrochemical Removal of Nitrate Ion on Brass Cathode and DSA Anode

Temporal Aspects of Corrosion Inhibition on Copper, Silver, and Copper-Silver Alloy: An Electrochemical Impedance Spectroscopy Study