Abstract:Magnesium salts are commonly employed as ammonium-free leaching agents in the extraction of weathered crust elution-deposited rare earth ores (WCE-REO). Nonetheless, these salts frequently face technical challenges, including relatively low leaching rates and inadequate permeability in the in-situ leaching process. In this study, cetyltrimethylammonium chloride (CTAC) was used as a novel leaching aid agent to improve the rare earth leaching process. The effects of CTAC and pH on the rare earth leaching behavior and permeability was investigated. The leaching kinetic model was established and the regulation mechanism by which CTAC interacts with clay mineral surfaces was revealed for rare earth leaching process enhanced by CTAC. The results indicate that the appropriate amount of CTAC can increase the permeation velocity by 1.16×10 −4 cm·s −1 . Moreover, the rare earth leaching rate increased from 83.75 % to 95.65 %, accompanied by a reduction in leaching equilibrium time under optimal conditions. However, a higher concentration of CTAC results in a lower permeation velocity due to the increasing viscosity and the hydrophilicity. The relatively low pH will affect permeability of composite leaching agent in the ore pillar, diminishing its beneficial impact on rare earth leaching. The kinetic equation, fitted by the shrinking core model, suggests that the leaching adheres to an internal diffusion control mechanism, underscoring mass transfer as the pivotal limiting factor in rare earth leaching. CTAC reduces surface tension and viscosity, facilitating the permeation of the leaching solution into the rare earth ore. Furthermore, CTAC can be adsorbed on the surface of rare earth mineral particles, increasing the contact angle of clay minerals, elevating the Zeta potential, and diminishing the thickness of the diffusion layer, thus promoting mass transfer during leaching. The results of atomic force microscopy (AFM) analysis shows that the appropriate amount of CTAC adsorbed on rare earth ores can decreases the thickness of the hydration film on the particles' surface, further improving the mass transfer efficiency during the leaching process. The findings of this study offer new insights into the green and efficient extraction of rare earth resources from both theoretical and technical perspectives.

Magnesium Leaching Behavior from a Copper Tailing with Hydrochloric Acid

Leaching Kinetics of Magnesium from Spent Magnesia-Chromium Refractories

Mg2+ Leaching and Co2 Sequestration of Magnesium Tailings Enhanced by External Field Coupled with Pretreatment

Kinetic study of high-pressure acid leaching of Mg and Ni from serpentine

Study on Column Leaching Behavior of Low-Grade High Calcium and Magnesium Copper Ore

Recovery of chromium and magnesium from spent magnesia-chrome refractories by acid leaching combined with alkali precipitation and evaporation

Leaching of rare earths and aluminum in weathered crust elution-deposited rare earth ore using magnesium sulfate: Effect of aluminum content in the leaching agent solution

LEACHING PERFORMANCE OF MAGNESIUM IN THE FGD PROCESS USING PHOSPHATE ORE SLURRY

Leaching Mechanism of Aluminum during Column Leaching of Ion-Adsorption Rare Earth Ore Using Magnesium Sulfate

Leaching behaviors of copper and arsenic from high-arsenic copper sulfide concentrates by oxygen-rich sulfuric acid leaching at atmospheric pressure

Leaching of iron from copper tailings by sulfuric acid: behavior, kinetics and mechanism

Leaching Kinetics of Copper Flotation Tailings in Aqueous Ammonia/Ammonium Carbonate Solution

Leaching kinetics of copper and valuable metal extraction from copper-cadmium residues of zinc hydrometallurgy by oxidation acid leaching

Extracting Gallium and Germanium from Zinc-leaching Residues by Hot-acid Leaching Process

Leaching Kinetics of Low-Grade Copper Ore Containing Calcium-Magnesium Carbonate in Ammonia-Ammonium Sulfate Solution with Persulfate

Thermodynamic Analysis on Diluted Acid Leaching Process of Tailings from Copper-nickel Mine

Comprehensive Recovery of Valuable Metals from Spent Magnesia–Chrome Refractories by Ferric Chloride–Hydrochloride Leaching

Leaching process assisted by cetyltrimethylammonium chloride for weathered crust elution-deposited rare earth ores: Leaching behavior, kinetic analysis and interfacial regulation

A Study on the Kinetics of Leaching the Residues from the Neutral Leaching Process with High Concentration of Sulfuric Acid at High Temperature

Strengthening rare earth and inhibiting aluminum leaching in magnesium salt-acetic acid compound system from ion-adsorption type rare earth ore

Kinetics Study on the Leaching of Copper from Calcification Roasting Copper Refining Slag Using Waste Acid