Abstract:Abstract Accelerated carbonation of ultramafic mine tailings has the potential to offset CO2 emissions produced by mining ores from Cu-Ni-platinum group element, podiform chromite, diamondiferous kimberlite, and historical chrysotile deposits. Treatments such as acid leaching, reaction of tailings with elevated concentrations of gaseous CO2, and optimization of tailings pore water saturation have been shown to enhance CO2 sequestration rates in laboratory settings. The next challenge is to deploy treatment technologies on the pilot and field scale while minimizing cost, energy input, and adverse environmental impacts. Implementation of accelerated tailings carbonation at field scale will ideally make use of in situ treatments or modified ore-processing routes that employ conventional technology and expertise and operate at close to ambient temperatures and pressures. Here, we describe column experiments designed to trial two geochemical treatments that address these criteria: (1) direct reaction of partially saturated ultramafic tailings with synthetic flue gas from power generation (10% CO2 in N2) and (2) repeated heap leaching of ultramafic tailings with dilute sulfuric acid. In the first experiment, we report rapid carbonation of brucite [Mg(OH)2] in the presence of 10% CO2 gas within tailings sampled from the Woodsreef chrysotile mine, New South Wales, Australia. Within four weeks, we observe a doubling of the amount of CO2 stored within minerals relative to what is achieved after three decades of passive mineral carbonation via air capture in the field. Our simulated heap leaching experiments, treated daily with 0.08 M H2SO4, produce high-Mg leachates that have the potential to sequester 21.2 kg CO2 m–2 y–1, which is approximately one to two orders of magnitude higher than the rate of passive carbonation of the Woodsreef mine tailings. Although some nesquehonite (MgCO3 · 3H2O) forms from these leachates, most of the Mg is precipitated as Mg sulfate minerals instead. Therefore, an acid other than H2SO4 could be used; otherwise, sulfate removal would be required to maximize CO2 sequestration potential from acid heap leaching treatments. Reactive transport modeling (MIN3P) is employed to simulate acid leaching experiments and predict the effects of heap leaching for up to five years. Finally, our synchrotron X-ray fluorescence microscopy results for leached tailings material reveal that valuable trace metals (Fe, Ni, Mn, Co, Cr) become highly concentrated within secondary Fe (hydr)oxide minerals at the pH neutralization horizon within our column experiments. This discrete horizon migrates downward, and our reactive transport models indicate it will become increasingly enriched in first-row transition metals in response to continued acid leaching. Acid-leaching treatments for accelerated mineral carbonation could therefore be useful for ore processing and recovery of base metals from tailings, waste rock, or low-grade ores.

Mg2+ Leaching and Co2 Sequestration of Magnesium Tailings Enhanced by External Field Coupled with Pretreatment

MgO-based Binders with Different Formulations for Solidifying Pb and Cd in MSWI Fly Ash: Solidification Effect and Related Mechanisms

Extraction of magnesium from mine tailings for carbon dioxide mineralization: A preliminary study of the effect of ammonium sulfate to tailings ratio on products and yield

Inhibition of cadmium releasing from sulfide tailings into the environment by carbonate-mineralized bacteria

Synergistic solidification of lead-contaminated soil by magnesium oxide and microorganisms

CO2 Sequestration Based Dissolution Study of Extremely Poor Vanado-titanomagnetite Deposit Tailings

Aqueous Carbonation of MgSO4 with (NH4)(2)CO3 for CO2 Sequestration

Mineralization of Flue Gas CO 2 with Coproduction of Valuable Magnesium Carbonate by Means of Magnesium Chloride

Carbon Sequestration Behavior of Magnesium Oxychloride Cement Based on Salt Lakes Magnesium Residue and Industrial Solid Waste

Montmorillonite-coupled microbially induced carbonate precipitation (MICP) enhanced contaminant removal and carbon capture in cyanide tailings

A study of the preparation of Fe(OH)_3 and Mg(OH)_2 from tailings

Mechanisms of enhancing MgO for stabilization/solidification of Pb-contaminated red clay through CO2 sequestration

Single-step conversion of low-grade magnesite to anhydrous MgCO 3 based on a biodegradable salicylic acid chelating system: Characterization; DFT calculations; mechanism

Enhanced simultaneous CO 2 mineralization and cadmium immobilization in a wide pH range by using ball-milled serpentine

Enhanced mineral carbonation on surface functionalized MgO derived from mine tailings

Accelerating Mineral Carbonation in Ultramafic Mine Tailings via Direct CO2 Reaction and Heap Leaching with Potential for Base Metal Enrichment and Recovery

Efficient preparation of magnesium bicarbonate from magnesium sulfate solution and saponification-extraction for rare earth separation

Recovery of Magnesium from Industrial Effluent and Its Implication on Carbon Capture and Storage

Experimental study on solidification and remediation of lead–zinc tailings based on microbially induced calcium carbonate precipitation (MICP)

Pretreatment of deep-sea bacteria for reverse flotation of magnesite tailings: Cleaner production, behavior and mechanism