Research on Seismic Locations Using Chemical Explosion Calibration

Li Xuezheng,Lei Jun,Fan Guangchao,Shen Xufeng

DOI: https://doi.org/10.3969/j.issn.1001-4683.2007.03.013

2007-01-01

Abstract:Location emulation present some significant results. When a calibration source is situated inside the seismic network, the curves of equivalent errors for epicenters and focal depths are concentric circles that the center of the circles is the calibration source, and approximate 30% events within the network, which surround the calibration source, show probubly 5% epicenter deflections. When a calibration source is located outside the network, approximate 10% events, which also surround the calibration source, shows about 10% epicenter errors. Whether the calibration source is inside the network or not, the computed epicenters all move toward the calibration source. The farther the calibration distance is,the larger the location deflection. Location results of the events calculated by velocity calibration, which are situated at symmetrical lines of a network, are not extremely reliable. The results obtained by the explosive calibration,in practice,can be summarized as follows: When the calibration source located inside the net, location precision of the events within net adopted vicinal calibration is higher than that of the events adopted velocity calibration, however, location precision of the events outside the net adopted vicinal calibration is lower than that of the events adopted velocity calibration.