Abstract:Offshore wind is a safe,clean,and stable source of renewable energy,which is a strategic option for overcoming the problems of energy shortage and environment contamination.Because of their high,slender,and flexible nature,accompanied with mass and stiffness distribution,offshore wind turbines are dynamically sensitive structures in which their dynamic behavior is strongly affected by environmental loading and the stiffness of their foundations.The first natural frequencies of these structures are very close to the forcing frequencies imposed by the environment and the onboard machinery.Changes in the foundation stiffness under cyclic loading will ultimately result in changes to the natural frequency of the structure.However,little is known about the long-term dynamic behavior of the entire offshore wind turbine structure.Therefore,the design of foundations and prediction of long term performance remain challenging.In the design work of offshore wind turbines,the soft-stiff type is usually chosen under general circumstances in which the natural frequency is between 1Pand 3Pbands.This study establishes a simplified wind turbine model based on the dynamic model test platform at the University of Surrey.The model system includes a foundation,tower,and top mass.On the basis of the novel cyclic loading provide system,four groups of tests were conducted to study the long-term dynamic behavior of a wind turbine model supported on a pile foundation.This investigation focused on changes of the model turbine’s first natural frequency and studied the influence from the amplitude of cyclic loading.For the observed tests results,detailed analysis was performed on the basis of soil behavior and its migration pattern.The test results and a series of similitude relationships reveal the dynamic behavior of an wind turbine structure.Moreover,suggestions for foundation and structure selection for a prototype wind turbine are given.

Model experiment on framed-tube embedded foundation for wind turbine

Analysis Approach of Piled Jacket Foundation in Sand for Offshore Wind Turbines Subjected to Lateral Loads

Analysis and Design of Bearing Capacity of Suction Caisson Foundations of Offshore Wind Turbines

Centrifuge modelling on tetrapod jacket foundation subjected to lateral loads

An Investigation into the Lateral Loading Response of Shallow Bucket Foundations for Offshore Wind Turbines Through Centrifuge Modeling in Sand

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Fatigue Analysis of Jacket Foundations for Offshore Wind Turbines

On Load-Bearing and Soil-Reacting Characteristics of Hybrid Pile-Bucket Foundations Subjected to Static Horizontal Loading

Study on Dynamic Response Characteristics of Circular Extended Foundation of Large Wind Turbine Generator

Design and Analysis of a New Prefabricated Foundation for Onshore Wind Turbines

Scaled Model Test Study of the Dynamic Behavior of an Offshore Wind Turbine Support Structure

A review of foundation design for wind turbine in coastal area and engineering application

Research on Failure Characteristics of Circular Expansion Foundation of Large Wind Turbine

Model Tests on Horizontal Load-Bearing and Deformation Resistance Capacities of Pile-Bucket Foundation in Soft Seabed Soil

Lateral Deformation Prediction Model of Pile Foundation in Liquefiable Site

Centrifugal Model Test of an Offshore Wind Turbine Foundation on Saturated Sand Ground

Failure mechanism of single pile-friction footing hybrid foundation under combined V–H–M loadings by PIV experiments and FE method

Simplified T -Z Models for Estimating the Frequency and Inclination of Jacket Supported Offshore Wind Turbines

Model Tests on Jacking Installation and Lateral Loading Performance of Jacket Foundation in Sand

Performance Analysis of an Improved Gravity Anchor Bolt Expanded Foundation