Abstract:The interactions among thermal history, plastic deformation and residual stresses in the friction stir welding (FSW) process under different welding parameters have been widely considered a crucial issue and still not fully understood. In the present study, a novel three-dimensional fully coupled thermo-mechanical finite element (FE) model based on coupled Eulerian-Lagrangian approach (CEL) has been developed to simulate the FSW process of aluminium alloy AA 6082-T6 and to analyse the thermo-mechanical interaction mechanisms under different welding conditions. The numerical model successfully simulates the plunge, dwell, and welding steps in FSW and captures the evolution of temperature, plastic deformation, and residual stresses in the welded joint. The obtained results were validated by experimental testing with observed cross-weld thermal history, optical macrography and residual stress measurement using the neutron diffraction technique. The results reveal that the tool rotation speed governs the temperature evolution; the peak temperature increased from 740 to 850 °K when the tool rotation speed rose from 800 to 1100 rpm. The rotational speed also affected the plastic deformation, material flow, and the volume of material being stirred during the welding process. Higher plastic deformation is formed in the stirring zone by increasing the tool angular velocity. This behaviour led to an increase in the stirring effect of the welding tool, reduction of the tunnel defect size and enhancing the quality of weldments. The distribution of residual stresses in different zones of the FSW joints has been found to have an M-shaped profile. A significant tensile residual stress is characterised in the edge of the nugget zone in both longitudinal and transverse directions, balanced by compressive stresses in the thermo-mechanically affected zone, heat-affected zone and base metal. The presented FE modelling provides a reliable insight into the effects of the welding parameters on the weld quality of FSW joints and process optimisation with minimised experimental trials.

Microhardness Prediction in Friction Stir Welding of 2014 Aluminium Alloy

Mechanistic study on friction stir welding of 2014 aluminium alloy

Prediction of temperature and residual stress distributions in friction stir welding of aluminum alloy

Prediction of Residual Stresses Within Dissimilar Al/steel Friction Stir Lap Welds Using an Eulerian-based Modeling Approach

Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061-T6 and 2014-T6 aluminum alloys

Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy

Tensile Properties and Mechanical Heterogeneity of Friction Stir Welded Joints of 2014 Aluminum Alloy

Numerical Simulation of Thermomechanical Behavior and Mechanical Property in HRFSW of Aluminum Alloy

Temperature-dependent friction coefficient and its effect on modeling friction stir welding for aluminum alloys

Numerical simulation and experimental research on friction stir welding of 2024-T3 aeronautical aluminum alloy

Integral and Layered Mechanical Properties of Friction Stir Welded Joints of 2014 Aluminium Alloy

Simulation of Friction Stir Welding of AZ31 Mg Alloys

Temperature Monitoring and Material Flow Characteristics of Friction Stir Welded 2A14-t6 Aerospace Aluminum Alloy

Numerical Simulation and Experimental Characterization of Friction Stir Welding on Thick Aluminum Alloy Aa2139-T8 Plates

Temperature distribution and mechanical properties of FSW medium thickness aluminum alloy 2219

Multi-scale modelling of the microstructure evolution during friction stir welding of 2195 Al–Li alloy

Microstructure and microhardness of aluminium alloy friction stir welds with heat treatment

Visualization of material flow in 2014 Al alloy friction stir welding process

Subregion Based Prediction of Residual States in Friction Stir Welding of Dissimilar Metals

Numerical Simulation of the Thermo-Mechanical Behavior of 6061 Aluminum Alloy during Friction-Stir Welding

Crystal Plasticity Modeling for Mechanical Property Prediction of AA2195-T6 Friction Stir Welded Joints