Abstract:Statement of problem Current designs of fiber-reinforced composite (FRC) resin-bonded fixed dental prostheses (RBFDPs) have a limited lifespan, failing mainly through veneer-fiber delamination, debonding, and fracture. Purpose The purpose of this in vitro study was to validate a new inlay-retained 2-unit cantilevered RBFDP with an optimized cavity and fiber layout proposed in a previous study by using simulated occlusal loading. Material and methods Two groups of specimens (n=20), 1 with and 1 without glass fibers, were used to test the influence of the cavity design and that of the fiber layout on their load capacity, respectively. The specimens without fibers were directly cut from a resin-ceramic block by using a computer-aided manufacturing system, while those with fibers were manually fabricated with unidirectional glass fibers and composite resin in a silicone mold. The specimens with and without fibers were attached to abutments made of the same resin-ceramic with a cyanoacrylate-based adhesive and a resin-based dental cement, respectively. An increasing compressive load was applied on the mesial fossa of the premolar pontic until failure. Cracking in the specimens during loading was monitored with a 2-channel acoustic emission (AE) system. Results All the specimens without fiber reinforcement debonded from the abutments. Those using the optimized shovel-shaped cavity design had a mean ±standard deviation failure load (50.0 ±17.3 N) that was 193% higher than that of those with the conventional step-box design (17.1 ±6.2 N; P <.001). No significant difference was found between the groups for the mean number of AE events per specimen (step-box: 49 ±34 versus shovel-shaped: 63 ±34; P =.427), the mean amplitude of each event (58.4 ±1.3 dB versus 59.5 ±2.4 dB; P =.299), or the mean time to failure (283.2 ±122.3 seconds versus 297.5 ±66.7 seconds; P =.798). Between the groups of specimens with reinforcing fibers, the mean failure load of the conventional design was approximately half that of the optimized one. Again, no significant difference was found for the mean number of AE events per specimen (conventional: 28 ±18 versus optimized: 52 ±53; P =.248) or the mean amplitude for each AE event (64.9 ±4.2 dB versus 61.7 ±5.2 dB; P =.187). The connectors of 8 fiber-reinforced specimens with the conventional design fractured; the other 2 debonded from the abutments. Half of the shape-optimized fiber-reinforced specimens had fractured abutments, but the cantilevers remained intact, 4 specimens fractured at the connector, and only 1 debonded from its abutment. Conclusions The shape-optimized 2-unit cantilevered FRC RBFDP had a higher load capacity than the conventional design.

In vitro comparison of fatigue failure between conventional denture and a new type resin-bonded fixed partial denture

[Wear Test of 4-Unit Posterior Resin Bonded Fixed Partial Dentures with Non-Rigid Connector].

Fatigue resistance of three resin luting systems bonding Ni-Cr alloy to bovine enamel

Assessment of the Different Types of Failure on Anterior Cantilever Resin-Bonded Fixed Dental Prostheses Fabricated with Three Different Materials: An In Vitro Study

Effect of accessory retention forms on the bond strength of resin-bonded fixed partial dentures: A 3D finite element study

Short-term Clinical Observation of Modified Resin-Bonded Fixed Partial Denture Utilizing Tooth Undercuts

[Influence of Retention-Form Design on the Retention of Resin-Bonded Fixed Partial Dentures].

Two-Year Clinical Trial Of Resin-Bonded Fixed Partial Dentures Incorporating Novel Attachments

Which dentine analogue material can replace human dentine for crown fatigue test?

Fatigue Resistance of Resin-Bonded Post–Core–Crown Treated Teeth with Flared Root Canal

Validation of a shape-optimized 2-unit cantilevered inlay-retained fiber-reinforced resin-bonded dental prosthesis

Biomechanical Analysis of Stress Distribution and Failure Risk in Mandibular Incisors Restored with Resin-Bonded Fixed Partial Dentures Using CAD/CAM Materials and Restoration Designs

Post-Fatigue Fracture and Marginal Behavior of Endodontically Treated Teeth: Partial Crown vs. Full Crown vs. Endocrown vs. Fiber-Reinforced Resin Composite

Comparative Evaluation of Stress Acting on Abutment, Bone, and Connector of Different Designs of Acid-Etched Resin-Bonded Fixed Partial Dentures: Finite Element Analysis

Evaluation of the mode of failure of abutments supporting implant-supported fixed partial dentures via different retention techniques

Clinical Application of Anterior All-Ceramic Cantilevered Resin-Bonded Fixed Partial Dentures

Comparison of Shear Bond Strength, Fatigue Limit and Fatigue Life in resin-bonded metal to enamel bonds

Clinical audit of posterior three-unit fixed-movable resin-bonded fixed partial dentures - A retrospective, preliminary clinical investigation

A comparative study of CAD/CAM fabricated polyether ether ketone and fiber-glass reinforcement composites versus metal lingual retainers under vertical load (an in vitro study)

Clinical effect of a new type resin cement on restoring single tooth loss with cobalt-chromium alloy resin-bonded bridge: an observation on 12 cases

A comparison of the fracture resistances of endodontically treated mandibular premolars restored with endocrowns and glass fiber post-core retained conventional crowns.