Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The incremental sheet metal forming process, characterized by the step-by-step deformation of sheet metal using a simple die, is classified as a type of plastic deformation technology. This method allows for the formation of complex-shaped parts even without the use of a specialized die. Its notable characteristic lies in its low forming load and high flexibility. To accurately forecast finite element simulation outcomes for the incremental sheet forming of 2024-O aluminum alloy sheets, constructing a precise constitutive model is essential. Typically, the uniform strain range in traditional unidirectional tensile tests does not surpass 0.3, primarily due to the necking phenomenon. This limitation hampers the accurate prediction of the actual large plastic deformation process. To address this issue, a theoretical model describing the stress-strain relationship in metal plastic deformation processes is developed using crystal plasticity theory. The constitutive model for the forming of 2024-O aluminum alloy is then constructed by adjusting the hardening coefficient and hardening index. Utilizing the improved constitutive model, the incremental sheet forming process is simulated using ABAQUS software. Upon comparison with experimental results, it is observed that the Thickness Average Absolute Relative Errors (TAARE) of the adjusted constitutive model at forming angles of 60°, 55°, and 50° are 0.414%, 0.467%, and 0.256%, and The Thickness Root Mean Square Errors (TRMSE) are determined as 0.0121, 0.0116, and 0.0094, respectively. These results indicate that the constitutive model and parameters established in this study can adequately capture the mechanical behavior of 2024-O aluminum alloy during the incremental sheet forming process.

A New Sheet Metal Forming System Based on Incremental Punching, Part 2: Machine Building and Experiment Results

Simulation Analysis of Upper Mould Base for High Speed Punch

Multi-point forming technology for sheet metal

Research on Sheet Metal Digital Incremental Forming Technology without Support

Automated design of sheet metal punches for bending multiple parts in a single setup

Development of a Compact Incremental Forming Machine

Investigation on the design of hydraulic high-speed punching press with a large press force and a long press stroke

Modelling and optimal design of sheet metal RP&M processes

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

Digital Twin-Driven Sheet Metal Forming: Modeling and Application for Stamping Considering Mold Wear

Advances in Sheet Forming—Materials Modeling, Numerical Simulation, and Press Technologies

Experimental Verification of a Benchmark Forming Simulation

Springback compensation of multiple-step incremental air-bending forming of sheet-metal

The Study for Stability of Closed-Loop Control System Based on Multiple-Step Incremental Air-Bending Forming of Sheet Metal

Multi-point die electromagnetic incremental forming for large-sized sheet metals

Research on incremental forming simulation based on an improved constitutive model

Electromagnetic pulse-assisted incremental drawing of aluminum cylindrical cup

Development of a flexible tooling system for sheet metal bending

Numerical Modelling for Efficient Analysis of Large Size Multi-Stage Incremental Sheet Forming

Experimental Investigation on Friction-Stir-Assisted Incremental Forming with Synchronous Bonding of Aluminum Alloy and Steel Sheets

A novel punching process with electronically permanent magnetic technology