Abstract:The probabilistic analyses provide a more rational approach for the safety assessment of structures since they consider the uncertainties in the calculations. Consequently, the design specifications of engineering structures are gradually transformed from the allowable stress design to the reliability-based specifications such as load and resistance factors design (LRFD) or partial safety factor design. The partial safety factors and the load andresistance factors provided in the reliability-based design codes are successfully determined from probabilistic frameworks. However, these specifications are classified into semi-probabilistic-based codes because no probabilistic analysis is required in the design practice. Thus, the actual reliability index of the design solutions maynot be as close to the target value as expected. This study employs the fully probabilistic analysis as an additional analysis to examine the reliability index of an LRFD-based design of the truss structure. A planar truss,which is designed following the semi-probabilistic code, is thoroughly examined. Several feasible sections are first designed using the LRFD code. Then, the actual reliability indexes of truss structures are evaluated to check if they meet the target reliability index specified in the reliability-based design codes. The tension and compression members concerning the strength limit state and the maximum deflection presenting for service ability are investigated as representative performances. The results of the probabilistic analyses indicate thatthe reliability indexes for the strength limit state are higher than the target value stipulated in the LRFD code. Compared to the tension members, more redundancy in terms of reliability index is observed for compression elements, although they are both designed at the limit state. Moreover, the reliability index obtained for theserviceability limit state is strongly dependent on the component (i.e., floor or roof) where the truss is utilized.

Dynamic Response Analysis for Uncertainty Truss Structures with Interval Factor Method

Analysis of structural robustness with non-probabilistic uncertainties

Vulnerability Assessment and Failure Scenarios Identification of Truss Structures

New judgment method on dynamic instability of truss structures: stress rate method

A study on the probabilistic safety assessment of the truss structure designed by the LRFD code

Uncertain static plane stress analysis with interval fields

A multiscale uncertainty propagation method for dynamic analysis of laminated FRP composite plates with hybrid random and interval uncertainties

A subinterval dimension-wise method for robust topology optimization of structures with truss-like lattice material under unknown but bounded uncertainties

Dynamic Response Analysis of a Shaft-Disk-drum Rotor System with Interval Uncertainties

Dynamic analysis of an L-shaped liquid-filled pipe with interval uncertainty

Optimization of Uncertain Structures with Interval Parameters Considering Objective and Feasibility Robustness

Mixed uncertainty analysis for dynamic reliability of mechanical structures considering residual strength

Uncertain stochastic vibration characteristic analysis of composite laminated rectangular plate based on improved kriging model

A novel iterative algorithm for natural frequency analysis of FG thin plates under interval uncertainty

Stochastic response estimation of wind-excited structures with multiple uncertain parameters

Uncertainty analysis of mechanical dynamics by combining response surface method with signal decomposition technique

An Interval Parameter Perturbation Method for Predicting the Natural Frequency Bounds of Intelligent Truss Structures with Uncertain-But-Bounded Parameters

Interval Perturbation Method to Structural Non-Probabilistic Reliability Analysis

Relevant interval perturbation method for uncertainty analysis of structural–acoustic coupling model

Uncertainty in Distinct Element Modeling of Freestanding Structures Considering Stiffness Parameters

Coupled fuzzy-interval model and method for structural response analysis with non-probabilistic hybrid uncertainties