Abstract:Identification of the heteroatom (nitrogen, sulfur, and oxygen)-containing compounds of petroleum is of key importance when considering industrial and environmental issues associated with crude oil production. The more commonly performed methods of crude oil fractionation are often insufficient in the extent to which they separate oils, not allowing defined "molecular" fractions to be obtained. Methods capable of performing a class type separation are uncommon and are often extensive and resource and time intensive. Here we report a method for the separation of crude oils into discrete compound classes. The method utilizes both ion exchange and normal phase chromatography to generate fractions of saturated hydrocarbons, aromatic hydrocarbons, basic compounds, naphthenic acids, and other oxygen-containing species, carbazoles, sulfones, and thiophenes from small crude oil samples (∼0.5 g). Assessment of method selectivity with a suite of model compounds has shown the fractions to be well-defined, with classes of model compounds isolated within discrete fractions. Application of the method to five crude oils of varying API gravity (12.1-38.3°) demonstrates a potential for wide-ranging use. Sample recoveries were high (77-98%) with simple evaporative losses correlating closely with total sample loss. Repeatability was also high, demonstrated by triplicate analyses of model compound mixtures, oils spiked with model compounds and oils alone. Separation selectivity was further demonstrated by application of the scheme to the Alaska North Slope (ANS) crude oil and analysis of fractions by comprehensive two-dimensional gas-chromatography mass-spectrometry (GC × GC/MS) and/or liquid-chromatography high-resolution accurate-mass mass-spectrometry methods (LC-HRAM-MS). Isolation of discrete fractions then allowed excellent separation (by LC and GC methods) of carbazole, dibenzothiophene, fluorenones, xanthones, and quinoline fractions. Individual parent and C1-5 alkyl homologues were easily separated (GC × GC/MS), allowing high-quality mass spectra (EI) to be obtained for the individual compounds in many cases. Analysis of fractions by GC × GC/MS also allowed a series of thioxanones to be identified.

Separation and Characterization of Trace Phosphorus Compounds in Hydrotreated Lube Base Oil

Progress in the Determination of Trace Polycyclic Aromatic Hydrocarbons in Complex Matrices

Separation of High Added-Value Chemical Compositions Derived from Biomass Pyrolysis Liquid Via Sequential Multi-Step Ph Adjustment

Class Type Separation of the Polar and Apolar Components of Petroleum

Research on Air Content Estimation of Tributyl Phosphate Hydraulic Fluids: A Novel Approach Based on the Vacuum Method

Quantitative determination of petroleum hydrocarbons in oily sludge following efficient n-heptane separation

Determination of the Content of Additive in Hydraulic Oil by Liquid Chromatography/Mass Spectrometry/Mass Spectrometry

Removal of Fluorine from Wet-Process Phosphoric Acid Using a Solvent Extraction Technique with Tributyl Phosphate and Silicon Oil

A non-aqueous phase extraction system using tributyl phosphate for H3PO4 separation from wet-process superphosphoric acid: Extraction equilibrium and mechanism

Extractive Separation of Tetralin-Dodecane Mixture Using Tetrabutylphosphonium Bromide-Based Deep Eutectic Solvent

Determination of Sulfur Compounds in Hydrotreated Transformer Base Oil by Potentiometric Titration

Speciation and molecular characterization of thiophenic and sulfide compounds in petroleum by sulfonation and methylation followed by electrospray mass spectrometry

Wet process phosphoric acid purification by solvent extraction using N-octanol and tributylphosphate mixtures

Quantitative Molecular Composition of Heavy Petroleum Fractions: A Case Study of Fluid Catalytic Cracking Decant Oil

Composition of sulfur species in deasphalted oils and their molecular-level transformation during the hydrotreating process

Separation and determination of the group-type composition of modern base and lubricating oils with a wide range of polarity, especially emitted to the environment

An Insight into the Molecular Structure of Sulfur Compounds and Their Reactivity During Residual Oil Hydroprocessing

Isolation of Sulfides from Petroleum for Molecular Characterization by Alumina and Silica Gel Adsorption

Study on the Extraction Kinetics of Phenolic Compounds from Petroleum Refinery Waste Lye

Fractionation and Characterization of Dissolved Organic Matter (DOM) in Refinery Wastewater by Revised Phase Retention and Ion-Exchange Adsorption Solid Phase Extraction Followed by ESI FT-ICR MS