Abstract:Indoor air pollution remains a major concern, with formaldehyde (HCHO) a primary contributor due to its long emission period and associated health risks, including skin allergies, coughing, and bronchitis. This study evaluated the adsorption performance and economic efficiency of various adsorbents (biochar, activated carbon, zeolites A, X, and Y) selected for HCHO removal. The impact of thermal treatment on adsorbent regeneration was also assessed. The experimental apparatus featured an adsorption column and HCHO concentration meter with an electrochemical sensor designed for adsorption analysis. Zeolite X exhibited the highest adsorption performance, followed by zeolite A, zeolite Y, activated carbon, and biochar. All adsorbents displayed increased HCHO removal rates with an extended length/diameter (L/D) ratio of the adsorption column. Zeolite A demonstrated the highest economic efficiency, followed by zeolite X, activated carbon, zeolite Y, and biochar. Higher L/D ratios improved economic efficiency and prolonged the replacement cycle (the optimal timing for adsorbent replacement to maintain high adsorption performance). Sensitivity analysis of adsorbent regeneration under varying thermal treatment conditions (150, 120, and 80°C) and durations (60, 45, and 30 min) revealed minimal changes in adsorption efficiency (±3%). The results indicated the potential of adsorbent regeneration under energy-efficient thermal treatment conditions (80°C, 30 min). In conclusion, this study underscores the importance of a comprehensive assessment, considering factors such as adsorption performance, replacement cycle, economic efficiency, and regeneration performance for the selection of optimal adsorbents for HCHO adsorption and removal. Implications : This study underscores the importance of adsorption technology for the removal of formaldehyde and similar volatile organic compounds (VOCs), highlighting the potential of alternative adsorbents, such as environmentally friendly biochar, in addition to traditional strategies, such as activated carbon and zeolites. Our findings demonstrate the feasibility of adsorbent regeneration under energy-efficient thermal treatment conditions. These results hold promise for improving indoor air quality, reducing environmental pollutants, and enhancing responses to air contaminants like fine dust and VOCs.

Removal of Low-Concentration Formaldehyde in Air by Adsorption on Activated Carbon Modified by Hexamethylene Diamine

A Core–shell Fe3O4@NH2-MIL-101(Cr) Composite Material for Efficient Removal of Formaldehyde

Removal of formaldehyde by activated carbon filters modified with inorganic ammonium salts

The Formaldehyde Removal by Commercial Activated Carbons at Room Temperature

Adsorptivity and kinetics for low concentration of gaseous formaldehyde on bamboo-based activated carbon loaded with ammonium acetate particles

Diaminopropane-appended activated carbons for the adsorptive removal of gaseous formaldehyde using a portable indoor air purification unit

Enhancement of Formaldehyde Removal by Activated Carbon Fiber Via in Situ Growth of Carbon Nanotubes

Nanodisk–like activated carbon-branched polyamine for adsorption and degradation of gaseous formaldehyde

Nitrogen and Oxygen Co-doped Porous Carbon Fabric for Efficient Removal of Formaldehyde

The impact of water co-adsorption on the removal of formaldehyde from the indoor air by oxygen-rich activated carbons: a theoretical and experimental study

Characterization and adsorption capacity of potassium permanganate used to modify activated carbon filter media for indoor formaldehyde removal

Preliminary Experimental Research of Metal-Organic Frameworks (mofs) for Formaldehyde Dynamic Adsorption

Adsorption of Polychlorinated Dibenzo-P-dioxins/dibenzofurans on Activated Carbon from Hexane.

Birnessite-Type Manganese Oxide on Granular Activated Carbon for Formaldehyde Removal at Room Temperature

Long-lasting removal of indoor formaldehyde in continuous airflow by B–TiO2@AC composites

Effect of Oxidation Treatment on the Adsorption and the Stability of Mercury on Activated Carbon.

Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal

A new method for measuring adsorption performance of formaldehyde on typical adsorbents

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Efficient Adsorption of Ammonia by Surface-Modified Activated Carbon Fiber Mesh

Adsorption of Polychlorinated Dibenzo-p-Dioxins and Dibenzofurans Vapors on Activated Carbon