Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Analysis on Damage Efficiency of Multiple Explosively Formed Penetrator Intelligent Mine Attacking to Tank

The Simulation on Scan Movement of Intelligent Mine for Multiple Explosively Formed Penetrator

Influence of MEFP Design Parameters on the Killing Probability of Intelligent Mine

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Influence of Initiation Ways on Killing Probabilities of Intelligent Mine Warhead

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

PARALLEL KILL MODEL ON MEFP INTELLIGENT MINE ATTACKING TO TANK TOP ARMOR

Influence of Launching Condition on the Killing Probabilities of Intelligent Mine

Study on Damage Ability of Anti-Armor Composite Warhead

Research on intelligent mine detecting actively target system

The Simulation Model of Damaging Evaluation of Focuses Fragment Warhead Against Battleplane Target

Functional Damage Assessment Method for Preformed Fragment Warheads to Evaluate the Effect on the Phased-Array Antenna

Numerical Simulation and Analysis of Shelled Explosive Penetrated but Not Detonated

The Influence on Tank Velocity for Intelligent Minefield's Operation Efficiency

Resistance of composite target against combined effects of large caliber projectile penetration and successive charge explosion

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Numerical Simulation of PELE Penetrating Composite Armor

Study of the Method for Scan and Detect of Anti-Tank Intelligent Mine

Experimental and theoretical investigation of the failure behavior of a reinforced concrete target under high-energy penetration

Anti-explosion Tests and Numerical Simulations of Ultra-High Toughness Cementitious Composites Subjected to Blast by Embedded Explosives

Model of Queuing Theory of Anti-tank Intelligent Minefield's Operation Efficiency Analysis