Abstract:The AZ61 magnesium alloys are widely used in the automobile industry for load-bearing component applications due to their high strength-to-weight ratio. In this study, the effects of the incorporation of silicon carbide (SiCp) particles on the microstructure and hot deformation behavior of an AZ61 alloy fabricated by the stir casting process were studied. Investigation of the fabricated composite was carried out using the hot compression process under different deformation conditions (temperatures (280, 320, 360, 400, and 440 °C) and strain rates (0.001, 0.01, 0.1, and 1 s −1 )). A constitutive equation was developed using the flow stress at a strain rate of 1.2. The results indicate that the predominant mechanism affecting the AZ61 alloy was dynamic recrystallization (DRX) arising from the dislocation climb. The microstructure of the AZ61/SiCp composite could be controlled by the process of DRX through particle stimulated nucleation due to the dislocation climb. Processing maps were developed to determine the workability parameters of the fabricated materials by examining the power dissipation efficiency and instability parameters. The processing maps revealed the workability domain to occur at a temperature of 440 °C and a strain rate of 0.001 s −1 for both the alloy and the composite. However, the AZ61/SiCp composites showed the maximum power dissipation efficiency (39%) and no instability region compared with the AZ61 alloy (38%). Therefore, the AZ61/SiCp composite has much better workability than the AZ61 alloy. There is good agreement between the typical microstructure, as illustrated by the processing map, and the findings of the microstructure measurements.

Effect of ECAP on the Microstructure and Tensile Property of SiCp/AZ91 Magnesium Matrix Composite

Microstructure Evolution and Mechanical Properties of Nano-Sicp/Az91 Composite Processed by Extrusion and Equal Channel Angular Pressing (Ecap)

Microstructure and Elevated Tensile Properties of Submicron SiCp/AZ91 Magnesium Matrix Composite

Effect of Equal Channel Angular Pressing on the Microstructure Evolution Andmechanical Property of the SiCP/AZ91 Composite Fabricated by Stir-Casting

Effects of Cyclic Extrusion and Compression on the Microstructure and Mechanical Properties of AZ91D Magnesium Composites Reinforced by SiC Nanoparticles

Enhancing mechanical properties and microstructure evolution of hybrid AZ61-5SiC-0.5CNTs composite during equal channel angular pressing

Microstructure and Tensile Properties of Magnesium Matrix Composite: Effected by Volume Fraction of Micron Sicp

Effect of Heat Treatment on Microstructure and Mechanical Properties of Squeeze Cast n SiCp/AZ91D Magnesium Matrix Composites

Effect of Hot Extrusion on Microstructures and Mechanical Properties of SiC Nanoparticles Reinforced Magnesium Matrix Composite

Microstructure and Mechanical Property of the Ecaped Mg2si/Mg Composite

Microstructure and Mechanical Properties of Sicp/Az91 Composite Deformed Through A Combination of Forging and Extrusion Process

Microstructures, Interface Structure and Room Temperature Tensile Properties of Magnesium Materials Reinforced by High Content Submicron SiCp

Hot Deformation Behavior of Sicp/Az91 Magnesium Matrix Composite Fabricated by Stir Casting

Effect of SiC Particles and the Particulate Size on the Hot Deformation and Processing Map of AZ91 Magnesium Matrix Composites

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature

Evaluation of the Effects of SiCp on Hot Deformation Behavior and Microstructure of AZ61 Magnesium Alloy

Microstructure and Mechanical Properties of Az31-0.5%Si Alloy Processed by Ecap

Microstructure Evolution of Sicw/Az91 Magnesium Matrix Composite During High Temperature Compression

Dynamic Recrystallization Behavior During Hot Deformation and Mechanical Properties of 0.2μm SiCp Reinforced Mg Matrix Composite

Effect of Particle Size on Microstructure and Mechanical Properties of Sicp/Az91 Magnesium Matrix Composite